DOI QR코드

DOI QR Code

Seismic vulnerability assessment criteria for RC ordinary highway bridges in Turkey

  • Avsar, O. (Department of Civil Engineering, Anadolu University) ;
  • Yakut, A. (Department of Civil Engineering, Middle East Technical University)
  • Received : 2011.03.20
  • Accepted : 2012.06.01
  • Published : 2012.07.10

Abstract

One of the most important and challenging steps in seismic vulnerability and performance assessment of highway bridges is the determination of the bridge component damage parameters and their corresponding limit states. These parameters are very essential for defining bridge damage state as well as determining the performance of highway bridges under a seismic event. Therefore, realistic damage limit states are required in the development of reliable fragility curves, which are employed in the seismic risk assessment packages for mitigation purposes. In this article, qualitative damage assessment criteria for ordinary highway bridges are taken into account considering the critical bridge components in terms of proper engineering demand parameters (EDPs). Seismic damage of bridges is strongly related to the deformation of bridge components as well as member internal forces imposed due to seismic actions. A simple approach is proposed for determining the acceptance criteria and damage limit states for use in seismic performance and vulnerability assessment of ordinary highway bridges in Turkey constructed after the 1990s. Physical damage of bridge components is represented by three damage limit states: serviceability, damage control, and collapse prevention. Inelastic deformation and shear force demand of the bent components (column and cap beam), and superstructure displacement are the most common causes for the seismic damage of the highway bridges. Each damage limit state is quantified with respect to the EDPs: i.e. curvature and shear force demand of RC bent components and superstructure relative displacement.

Keywords

References

  1. AASHTO (2010), LRFD Bridge Design Specifications, American Association of State Highway and Transportation Officials, 5th Ed., Washington D.C.
  2. Avsar, O., Yakut, A. and Caner, A. (2011), "Analytical fragility curves for ordinary highway bridges in Turkey", Earthq. Spectra, 27(4), 971-996. https://doi.org/10.1193/1.3651349
  3. Avsar, O. (2009), "Fragility based seismic vulnerability assessment of ordinary highway bridges in Turkey', PhD. Thesis, Middle East Technical University, Ankara.
  4. Aydan, O., Kumsar, H. and Toprak, S. (2009), "The 2009 L'Aquila earthquake (Italy): Its characteristics and implications for earthquake science and earthquake engineering", J. Earth Sci. Appl. Res. Centr. Hacettepe Univ., 30(3), 235-257.
  5. Banerjee, S. and Shinozuka, M. (2007), "Nonlinear static procedure for seismic vulnerability assessment of bridges", Comput.-Aided Civ. Infrastr. Eng., 22, 293-305. https://doi.org/10.1111/j.1467-8667.2007.00486.x
  6. Basoz, N. and Mander, J. (1999), "Enhancement of the highway transportation lifeline module in HAZUS", National Institute of Building Sciences.
  7. Bruneau, M., Mander, J.B., Mitchell, W.A., Papageorgiou, A., Scawthorn, C., Sigaher, N. and Taddeo, L. (1999), "MCEER Response: Preliminary Reports from the Kocaeli (Izmit) Earthquake of August 17, 1999", Publication No. MCEER-99-SP02, Multidisciplinary Center for Earthquake Engineering Research, State University of New York, Buffalo, NY.
  8. California Department of Transportation (CALTRANS) (2006), Seismic Design Criteria, Version 1.4, Sacramento, CA.
  9. Erduran, E. and Yakut, A. (2004), "Drift based damage functions for reinforced concrete columns", Comput. Struct., 82, 121-130. https://doi.org/10.1016/j.compstruc.2003.10.003
  10. European Committee for Standardization, Eurocode 8 (2005), Design of Structures for Earthquake Resistance Part 3: Assessment and Retrofitting of Buildings, European Standard EN 1998-3:2005, Brussels.
  11. Federal Highway Administration (FHWA) (1995), Seismic Retrofitting Manual for Highway Bridges, Report No. FHWA-RD-94-052, McLean, VA.
  12. FEMA. (2003), HAZUS-MH MR1: Technical Manual, Vol. Earthquake Model, Federal Emergency Management Agency, Washington DC.
  13. Hwang, H., Liu, J.B. and Chiu, Y.H. (2001), Seismic Fragility Analysis of Highway Bridges, Report No. MAEC RR-4, Center for Earthquake Research Information.
  14. Kawashima, K. (2002), "Damage of bridges resulting from fault rupture in the 1999 Kocaeli and Duzce, Turkey Earthquakes and the 1999 Chi-Chi, Taiwan Earthquake", Struct. Eng./Earthq.e Eng., JSCE, (Special Issue), 19(2), 179-197.
  15. Kent, D.C. and Park, R. (1971), "Flexural members with confined concrete", J. Struct. Div., 97(7), 1969-1990.
  16. Kowalsky, M. J. (2000). "Deformation limit states for circular reinforced concrete bridge columns", J. Struct. Eng.-ASCE, 126(8), 869-878. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:8(869)
  17. Liao, W.I. and Loh, C.H. (2004), "Preliminary study on the fragility curves for highway bridges in Taiwan", J. Chin. Inst. Eng., 27(3), 367-375. https://doi.org/10.1080/02533839.2004.9670883
  18. Lin, C.C.J., Hung, H.H., Liu, K.Y. and Chai, J.F. (2010), "Reconnaissance observation on bridge damage caused by the 2008 Wenchuan (China) earthquake", Earthq. Spectra, 26(4), 1057-1083. https://doi.org/10.1193/1.3479947
  19. Nielson, B.G. and DesRoches, R. (2007), "Analytical seismic fragility curves for typical bridges in the central and southeastern united states", Earthq. Spectra, 23(3), 615-633. https://doi.org/10.1193/1.2756815
  20. Olmos, B.A. and Roesset, J.M. (2010), "Effects of the nonlinear behavior of lead-rubber bearings on the seismic response of bridges", Earthq. Struct., 1(2), 215-230 https://doi.org/10.12989/eas.2010.1.2.215
  21. OpenSees (2009), Open System for Earthquake Engineering Simulation, Version 2.1.0, Pacific Earthquake Engineering Research Center, http://opensees.berkeley.edu
  22. Padgett, J.E. and DesRoches, R. (2009), "Retrofitted bridge fragility analysis for typical classes of multispan bridges", Earthq. Spectra, 25(1), 117-141. https://doi.org/10.1193/1.3049405
  23. Pamuk, A., Kalkan, E. and Ling, H.I. (2005), "Structural and geotechnical impacts of surface rupture on highway structures during recent earthquakes in Turkey", Soil Dyn. Earthq. Eng., 25, 581-589. https://doi.org/10.1016/j.soildyn.2004.11.011
  24. Priestley, M.J.N., Seible, F. and Calvi, G.M. (1996), Seismic Design and Retrofit of Bridges, John Wiley & Sons, Inc., New York, NY.
  25. Priestley, M.J.N., Calvi, G.M. and Kowalsky, M.J. (2007), Displacement-based Seismic Design of Structures, IUSS Press, Pavia, Italy.
  26. Scott, B.D., Park, R. and Priestley, M.J.N. (1982), "Stress-strain behavior of concrete confined by overlapping hoops at low and high strain rates", ACI Struct. J., 79(1), 13-27.
  27. Tubaldi, E., Barbato, M. and Dall'Asta, A. (2010), "Transverse seismic response of continuous steel concrete composite bridges exhibiting dual load path", Earthq. Struct., 1(1), 21-41. https://doi.org/10.12989/eas.2010.1.1.021
  28. Turkish Earthquake Code (TEC) (2007), Specification for Structures to be Built in Disaster Areas, Ministry of Public Works and Settlement Government of Republic of Turkey.
  29. Wang, C.J. (2007), "Failure study ofa bridge subjected to pounding and sliding under severe ground motions", Int. J. Impact Eng., 34(2), 216-231. https://doi.org/10.1016/j.ijimpeng.2005.07.003

Cited by

  1. In-Depth Investigation of Seismic Vulnerability of an Aging River Bridge Exposed to Scour vol.31, pp.5, 2017, https://doi.org/10.1061/(ASCE)CF.1943-5509.0001036
  2. Development of fragility curves for RC bridges subjected to reverse and strike-slip seismic sources vol.11, pp.3, 2016, https://doi.org/10.12989/eas.2016.11.3.517
  3. Seismic performance evaluation and retrofitting with viscous fluid dampers of an existing bridge in Istanbul vol.49, pp.4, 2014, https://doi.org/10.12989/sem.2014.49.4.463
  4. Seismic Vulnerability Assessment of a RC Pedestrian Crossing pp.1559-808X, 2018, https://doi.org/10.1080/13632469.2018.1453399
  5. Fragility curves for the typical multi-span simply supported bridges in northern Pakistan vol.64, pp.2, 2012, https://doi.org/10.12989/sem.2017.64.2.213