Structural Engineering and Mechanics

  • 제42권6호
  • /
  • Pages.849-866
  • /
  • 2012
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Assessment of non-prismatic beams having symmetrical parabolic haunches with constant haunch length ratio of 0.5

  • Yuksel, S. Bahadir (Department of Civil Engineering, Selcuk University)
  • 투고 : 2011.01.06
  • 심사 : 2012.05.08
  • 발행 : 2012.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

Single span historic bridges often contain non-prismatic members identified with a varying depth along their span lengths. Commonly, the symmetric parabolic height variations having the constant haunch length ratio of 0.5 have been selected to lower the stresses at the high bending moment points and to maintain the deflections within the acceptable limits. Due to their non-prismatic geometrical configuration, their assessment, particularly the computation of fixed-end horizontal forces (FEFs) and fixed-end moments (FEMs) becomes a complex problem. Therefore, this study aimed to investigate the behavior of non-prismatic beams with symmetrical parabolic haunches (NBSPH) having the constant haunch length ratio of 0.5 using finite element analyses (FEA). FEFs and FEMs due to vertical loadings as well as the stiffness coefficients and the carry-over factors were computed through a comprehensive parametric study using FEA. It was demonstrated that the conventional methods using frame elements can lead to significant errors, and the deviations can reach to unacceptable levels for these types of structures. Despite the robustness of FEA, the generation of FEFs and FEMs using the nodal outputs of the detailed finite element mesh still remains an intricate task. Therefore, this study advances to propose effective formulas and dimensionless estimation coefficients to predict the FEFs, FEMs, stiffness coefficients and carry-over factors with reasonable accuracy for the analysis and re-evaluation of the NBSPH. Using the proposed approach, the fixed-end reactions due to vertical loads, and also the stiffness coefficients and the carry-over factors of the NBSPH can be determined without necessitating the detailed FEA.

키워드

참고문헌

  1. Al-Gahtani, H.J. (1996), "Exact stiffnesses for tapered members", J. Struct. Eng.-ASCE, 122(10), 1234-1239. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:10(1234)
  2. Balkaya, C. (2001), "Behavior and modeling of nonprismatic members having T-sections", J. Struct. Eng.-ASCE, 127(8), 940-946. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:8(940)
  3. Balkaya, C., Kalkan, E. and Yuksel, S.B. (2006), "FE analysis and practical modeling of RC multi-bin circular silos", ACI Struct. J., 103(3), 365-371.
  4. Bathe, K.J. (1996), Finite Element Procedures, Prentice Hall Publisher, NJ, USA.
  5. Brown, C.J. (1984), "Approximate stiffness matrix for tapered beams", J. Struct. Eng.-ASCE, 110(12), 3050-3055. https://doi.org/10.1061/(ASCE)0733-9445(1984)110:12(3050)
  6. CSI (2007), Computer and Structures Inc., SAP2000 User's Manual, Berkeley, CA.
  7. Eisenberger, M. (1985), "Explicit stiffness matrices for non-prismatic members", Comput. Struct., 20(4), 715-720. https://doi.org/10.1016/0045-7949(85)90032-X
  8. Eisenberger, M. (1991), "Stiffness matrices for non-prismatic members including transverse shear", Comput. Struct., 40(4), 831-835. https://doi.org/10.1016/0045-7949(91)90312-A
  9. El-Mezaini, N., Balkaya, C. and Citipitioglu, E. (1991), "Analysis of frames with nonprismatic members", J. Struct. Eng.-ASCE., 117(6), 1573-1592. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:6(1573)
  10. Friedman, Z. and Kosmatka, J.B. (1992a), "Exact stiffness matrix of a non-uniform beam-I. Extension, torsion, and bending of a Bernoulli-Euler beam", Comput. Struct., 42(5), 671-682. https://doi.org/10.1016/0045-7949(92)90179-4
  11. Friedman, Z. and Kosmatka, J.B. (1992b), "Exact stiffness matrix of a non-uniform beam-II. Bending of a Timoshenko beam", Comput. Struct., 49(3), 545-555.
  12. Funk, R.R. and Wang, K.T. (1988), "Stiffness of non-prismatic members", J. Struct. Eng.-ASCE, 114(2), 489-494. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:2(489)
  13. Hibbeler, R. (2002), Structural Analysis, NJ: Prentice-Hall, Inc., Fifth Edition, Upper Saddle River, New Jersey.
  14. Horrowitz, B. (1997), "Singularities in elastic finite element analysis", Concrete Int., December, 33-36.
  15. Maugh, L.C. (1964), Statically Indeterminate Structures: Continuous Girders and Frames with Variable Moment of Inertia, John & Wiley, New York.
  16. Medwadowski, S.J. (1984), "Nonprismatic shear beams", J. Struct. Eng.-ASCE, 110(5), 1067-1082. https://doi.org/10.1061/(ASCE)0733-9445(1984)110:5(1067)
  17. Portland Cement Association (PCA) (1958), Beam Factors and Moment Coefficients for Members of Variable Cross-section, Handbook of Frame Constants, Chicago.
  18. Tartaglione, L.C. (1991), Structural Analysis, McGraw-Hill, Ins, United States of America.
  19. Tena-Colunga, A. (1996), "Stiffness formulation for nonprismatic beam elements", J. Struct. Eng.-ASCE, 122(12), 1484-1489. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:12(1484)
  20. Timoshenko, S.P. and Young, D.H. (1965), Theory of Structures, McGraw-Hill Book Co., Inc., New York, USA.
  21. Valderbilt, M.D. (1978), "Fixed-end action and stiffness matrices for non-prismatic beams", ACI Struct. J., 75(1), 290-298.
  22. Weaver, W. and Gere, J.M. (1990), Matrix Analysis of Framed Structures, Van Nostrand Reinhold, New York.
  23. Yuksel, S.B. (2008), "Slit connected coupling beams for tunnel form building structures", Struct. Des. Tall Spec. Build., 17(3), 579-600. https://doi.org/10.1002/tal.367
  24. Yuksel S.B. (2009a), "Behaviour of symmetrically haunched non-prismatic members subjected to temperature changes", Struct. Eng. Mech., 31(3), 297-314. https://doi.org/10.12989/sem.2009.31.3.297
  25. Yuksel, S.B. (2009b), "Investigation of the behavior of single span reinforced concrete historic bridges by using finite element method", Proceedings of the Eleventh International Conference on Structural Repairs and Maintenance of Heritage Architecture (STREMAH 2009), Tallinn, Estonia, July.
  26. Yuksel, S.B. (2009c), "Investigation of the behavior of single span reinforced concrete historic bridges by using finite element method", Report No. TUB TAK-MAG-107M639, Scientific and Technical Research Council of Turkey. (in Turkish)
  27. Yuksel, S.B. and Arikan, S. (2009), "A new set of design aids for the groups of four cylindrical silos due to interstice and internal loadings", Struct. Des. Tall Spec. Build., 18(2), 149-169. https://doi.org/10.1002/tal.399

피인용 문헌

  1. Free vibration analysis of non-prismatic beams under variable axial forces vol.43, pp.5, 2012, https://doi.org/10.12989/sem.2012.43.5.561
  2. Performance of non-prismatic simply supported prestressed concrete beams vol.52, pp.4, 2014, https://doi.org/10.12989/sem.2014.52.4.723
  3. A new approach for free vibration analysis of nonuniform tall building structures with axial force effects pp.15417794, 2019, https://doi.org/10.1002/tal.1591
  4. Modeling for fixed-end moments of I-sections with straight haunches under concentrated load vol.23, pp.5, 2012, https://doi.org/10.12989/scs.2017.23.5.597