Structural Engineering and Mechanics

  • 제42권4호
  • /
  • Pages.489-505
  • /
  • 2012
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Construction stage analysis of fatih sultan mehmet suspension bridge

  • 투고 : 2011.03.28
  • 심사 : 2012.04.11
  • 발행 : 2012.05.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, it is aim to perform the construction stage analysis of suspension bridges using time dependent material properties. Fatih Sultan Mehmet Suspension Bridge connecting the Europe and Asia in Istanbul is selected as an example. Finite element models of the bridge are modelled using SAP2000 program considering project drawing. Geometric nonlinearities are taken into consideration in the analysis using P-Delta large displacement criterion. The time dependent material strength variations and geometric variations are included in the analysis. Because of the fact that the bridge has steel structural system, only prestressing steel relaxation is considered as time dependent material properties. The structural behaviour of the bridge at different construction stages has been examined. Two different finite element analyses with and without construction stages are carried out and results are compared with each other. As analyses result, variation of the displacement and internal forces such as bending moment, axial forces and shear forces for bridge deck and towers are given with detail. It is seen that construction stage analysis has remarkable effect on the structural behaviour of the bridge.

키워드

참고문헌

  1. Adanur, S. and Gunayd n, M. (2010), "Construction stage analysis of bosporus suspension bridge", Proceeding of 9th International Congress on Advances in Civil Engineering, Trabzon, September.
  2. Altunisik, A.C., Bayraktar, A., Sevim, B., Domanic, A. and Adanur, S. (2009), "Construction stage analysis of bridges using time dependent material properties", Proceeding of International Symposium on Earthquake, Sakarya, September.
  3. Altunisik, A.C., Bayraktar, A., Sevim, B., Adanur, S. and Domanic, A. (2010i), "Construction stage analysis of kömürhan highway bridge using time dependent material properties", Struct. Eng. Mech., 36(2), 207-244. https://doi.org/10.12989/sem.2010.36.2.207
  4. Altunisik, A.C. (2010), "Karayolu koprulerinin yapysal davranyþlarynyn analitik ve deneysel yöntemlerle belirlenmesi", PhD Thesis, Karadeniz Technical University, Trabzon, Turkey. (In Turkish)
  5. Ates, S. (2010), "Numerical modelling of continuous concrete box girder bridges considering construction stages", Appl. Math. Model., 35(8), 3809-3820.
  6. CEB-FIP Model Code (1990), Thomas Telford, ISBN: 0727716964.
  7. Cheng, J., Jiang, J.J., Xiao, R.C. and Xia, M. (2003), "Wind-induced load capacity analysis and parametric study of a long-span steel arch bridge under construction", Comput. Struct., 81, 2513-2524. https://doi.org/10.1016/S0045-7949(03)00304-3
  8. Cho, T. and Kim, T.S. (2008), "Probabilistic risk assessment for the construction phases of a bridge construction based on finite element analysis", Finite Elem. Analy. D., 44, 383-400. https://doi.org/10.1016/j.finel.2007.12.004
  9. Dost, Y. and Dedeoglu, E. (2008), "Design and construction stages of Fatih Sultan Mehmet Bridge", Proceeding of 1st Collaborative Symposium of Turk-Japan Civil Engineers, Istanbul, June.
  10. Karakaplan, A., Caner, A., Kurc, O., Domanic, A. and Lulec, A. (2007), "New strategy in the structural analysis: construction stage", Proceeding of 1st Symposium of Bridges and Viaducts, Antalya, November.
  11. Ko, J.M., Xue, S.D. and Xu, Y.L. (1998), "Modal analysis of suspension bridge deck units in erection stage", Eng. Struct., 20, 1102-1112. https://doi.org/10.1016/S0141-0296(97)00207-1
  12. Kwak, H.G. and Seo, Y.J. (2002), "Numerical analysis of time-dependent behaviour of pre- cast pre-stressed concrete girder bridges", Constr. Buil. Mater., 16, 49-63. https://doi.org/10.1016/S0950-0618(01)00027-7
  13. Li, Z., Li, A. and Zhang, J. (2010), "Effect of boundary conditions on modal parameters of the Run Yang Suspension Bridge", Smart Struct. Syst., 6(8), 905-920. https://doi.org/10.12989/sss.2010.6.8.905
  14. Nikitas, N., Macdonald, J.H.G. and Jakobsen, J.B. (2011), "Identification of flutter derivatives from full-scale ambient vibration measurements of the Clifton Suspension Bridge", Wind Struct., 14(3), 221-238. https://doi.org/10.12989/was.2011.14.3.221
  15. Pindado, S., Meseguer, J. and Franchini, S. (2005), "The influence of the section shape of box-girder decks on the steady aerodynamic yawing moment of double cantilever bridges under construction", J. Wind Eng. Indus. Aerod., 93, 547-555. https://doi.org/10.1016/j.jweia.2005.05.005
  16. SAP2000 (2008), Integrated Finite Element Analysis and Design of Structures, Computers and Structures Inc, Berkeley, California, USA.
  17. Somja, H. and Goyet, V.V. (2008), "A New strategy for analysis of erection stages including an efficient method for creep analysis", Eng. Struct., 30, 2871-2883. https://doi.org/10.1016/j.engstruct.2008.03.015
  18. Soyluk, K., Diri, T.G. and S cacik, E.A. (2010), "Time dependent nonlinear analysis o segmentally erected cablestayed bridges", Proceeding of 9th International Congress on Advances in Civil Engineering, Trabzon, September.
  19. Ubertini, F. (2010), "Prevention of Suspension Bridge flutter using multiple tuned mass dampers", Wind Struct., 13(3), 235-256. https://doi.org/10.12989/was.2010.13.3.235
  20. Wang, P.H., Tang, T.Y. and Zheng, H.N. (2004), "Analysis of cable-stayed bridges during construction by cantilever methods", Comput. Struct., 82, 329-346. https://doi.org/10.1016/j.compstruc.2003.11.003
  21. Wang, S.Q., Xia, H., Guo, W.W. and Zhang, N. (2010), "Nonlinear dynamic response analysis of a long-span Suspension Bridge under running train and turbulent wind", Interact. Multis. Mech., 3(4), 309-320. https://doi.org/10.12989/imm.2010.3.4.309
  22. Zhang, W.M., Ge, Y.J. and Levitan, M.L. (2011), "Aerodynamic flutter analysis of a new Suspension Bridge with double main spans", Wind Struct., 14(3), 187-208. https://doi.org/10.12989/was.2011.14.3.187

피인용 문헌

  1. Construction stage effect on the dynamic characteristics of RC frame using operational modal analysis vol.12, pp.1, 2013, https://doi.org/10.12989/cac.2013.12.1.079
  2. Design analysis of the optimum configuration of self-anchored cable-stayed suspension bridges vol.51, pp.5, 2014, https://doi.org/10.12989/sem.2014.51.5.847
  3. Effects of soil-structure interaction on construction stage analysis of highway bridges vol.12, pp.2, 2013, https://doi.org/10.12989/cac.2013.12.2.169
  4. Determination of structural behavior of Bosporus suspension bridge considering construction stages and different soil conditions vol.17, pp.4, 2014, https://doi.org/10.12989/scs.2014.17.4.405
  5. A specific rod model based efficient analysis and design of hanger installation for self-anchored suspension bridges with 3D curved cables vol.110, 2016, https://doi.org/10.1016/j.engstruct.2015.11.040
  6. Navier’s 1823 Memoire : Analyses of Displacements, Stiffness, and Vibration of Suspension Bridges vol.24, pp.7, 2019, https://doi.org/10.1061/(asce)be.1943-5592.0001436
  7. Nondestructive Experimental Measurement, Model Updating, and Fatigue Life Assessment of Çarşamba Suspension Bridge vol.27, pp.2, 2012, https://doi.org/10.1061/(asce)be.1943-5592.0001818