Structural Engineering and Mechanics

  • 제42권2호
  • /
  • Pages.153-174
  • /
  • 2012
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Parameter calibrations and application of micromechanical fracture models of structural steels

  • Liao, Fangfang (Department of Structural Engineering, Tongji University) ;
  • Wang, Wei (State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University) ;
  • Chen, Yiyi (State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University)
  • 투고 : 2011.05.27
  • 심사 : 2012.03.10
  • 발행 : 2012.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

Micromechanical facture models can be used to predict ductile fracture in steel structures. In order to calibrate the parameters in the micromechanical models for the largely used Q345 steel in China, uniaxial tensile tests, smooth notched tensile tests, cyclic notched bar tests, scanning electron microscope tests and finite element analyses were conducted in this paper. The test specimens were made from base metal, deposit metal and heat affected zone of Q345 steel to investigate crack initiation in welded steel connections. The calibrated parameters for the three different locations of Q345 steel were compared with that of the other seven varieties of structural steels. It indicates that the toughness index parameters in the stress modified critical strain (SMCS) model and the void growth model (VGM) are connected with ductility of the material but have no correlation with the yield strength, ultimate strength or the ratio of ultimate strength to yield strength. While the damage degraded parameters in the degraded significant plastic strain (DSPS) model and the cyclic void growth model (CVGM) and the characteristic length parameter are irrelevant with any properties of the material. The results of this paper can be applied to predict ductile fracture in welded steel connections.

키워드

참고문헌

  1. Benzerga, A.A. and Leblond, J.B. (2010), "Ductile fracture by void growth to coalescence", Adv. Appl. Mech., 44, 169-305. https://doi.org/10.1016/S0065-2156(10)44003-X
  2. Chen, T. (2007), "Extremely low cycle fatigue assessment of thick-walled steel piers", Ph.D. Thesis, Nagoya University, Japan.
  3. Chi, W.M. (2000), "Prediction of steel connection failure using computational fracture mechanics", Ph.D. Thesis, Stanford University, CA, USA.
  4. Fell, B.V., Myers, A.T., Deierlein, G.G. and Kanvinde, A.M. (2006), "Testing and simulation of ultra-low cycle fatigue and fracture in steel braces", Proceedings of the 8th U.S. National Conference on Earthquake Engineering, San Francisco, CA, USA.
  5. Hancock, J.W. and Cowling, M.J. (1980), "Role of state of stress in crack-tip failure processes", Meth. Sci., 14(8-9), 293-304. https://doi.org/10.1016/0036-9748(80)90347-6
  6. Hancock, J.W. and Mackenzie, A.C. (1976), "On the mechanics of ductile failure in high-strength steel subjected to multi-axial stress states", J. Mech. Phys. Solids, 24(3), 147-169. https://doi.org/10.1016/0022-5096(76)90024-7
  7. Kanvinde, A.M. and Deierlein, G.G. (2006), "Void growth model and stress modified critical strain model to predict ductile fracture in structural steels", J. Struct. Eng., 132(12), 1907-1918. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:12(1907)
  8. Kanvinde, A.M. and Deierlein, G.G. (2007a), "Finite-element simulation of ductile fracture in reduced section pull-plates using micromechanics-based fracture models", J. Struct. Eng., 133(5), 656-664. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:5(656)
  9. Kanvinde, A.M. and Deierlein, G.G. (2007b), "Cyclic void growth model to assess ductile fracture initiation in structural steels due to ultra low cycle fatigue", J. Eng. Mech., 133(6), 701-712. https://doi.org/10.1061/(ASCE)0733-9399(2007)133:6(701)
  10. Kanvinde, A.M. and Deierlein, G.G. (2008), "Validation of cyclic void growth model for fracture initiation in blunt notch and dogbone steel specimens", J. Struct. Eng., 134(9), 1528-1537. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:9(1528)
  11. Kuroda, M. (2002), "Extremely low cycle fatigue life prediction based on a new cumulative fatigue damage model", Int. J. Fatigue, 24(6), 699-703. https://doi.org/10.1016/S0142-1123(01)00170-0
  12. Lemaitre, J. and Chaboche, J.L. (1990), Mechanics of Solid Materials, Cambridge University Press.
  13. Myers, A.T., Deierlein, G.G. and Kanvinde, A.M. (2009), "Testing and probabilistic simulation of ductile fracture initiation in structural steel components and weldments", Technical Rep. 170, John A. Blume Earthquake Engineering Center, Stanford University, CA, USA.
  14. Panontin, T.L. and Sheppard, S.D. (1995), "The relationship between constraint and ductile fracture initiation as defined by micromechanical analyses", Fract. Mech., 26, 54-85.
  15. Rice, J.R. and Tracey, D.M. (1969), "On the ductile enlargement of voids in triaxial stress fields", J. Mech. Phys. Solids, 17(3), 201-217. https://doi.org/10.1016/0022-5096(69)90033-7
  16. Stojadinovic, B., Goel, S.C. and Lee, K.H. (2000), "Development of post-Northridge steel moment connections", Proceedings of the 12th World Conference on Earthquake Engineering, New Zealand.
  17. Tateishi, K. and Hanji, T. (2004), "Low cycle fatigue strength of butt-welded steel joint by means of new testing system with image technique", Int. J. Fatigue, 26(12), 1349-1356. https://doi.org/10.1016/j.ijfatigue.2004.03.016
  18. Tateishi, K., Hanji, T. and Minami, K. (2007), "A prediction model for extremely low cycle fatigue strength of structural steel", Int. J. Fatigue, 29(5), 887-896. https://doi.org/10.1016/j.ijfatigue.2006.08.001
  19. Theocaris, P.S. (1995), "Failure criteria for isotropic bodies revisited", Eng. Fract. Mech., 51(2), 239-264. https://doi.org/10.1016/0013-7944(94)00270-R

피인용 문헌

  1. Simulation of ductile fracture in welded tubular connections using a simplified damage plasticity model considering the effect of stress triaxiality and Lode angle vol.114, 2015, https://doi.org/10.1016/j.jcsr.2015.07.023
  2. Effects of Constrained Groove Pressing (CGP) on the plane stress fracture toughness of pure copper vol.52, pp.5, 2014, https://doi.org/10.12989/sem.2014.52.5.957
  3. Effects of corrosion on surface characterization and mechanical properties of butt-welded joints vol.126, 2016, https://doi.org/10.1016/j.jcsr.2016.07.001
  4. Novel correction methods on a miniature tensile device based on a modular non-standard layout vol.24, pp.8, 2013, https://doi.org/10.1088/0957-0233/24/8/085901
  5. Residual seismic performance of steel bridges under earthquake sequence vol.11, pp.4, 2016, https://doi.org/10.12989/eas.2016.11.4.649
  6. Ductile Fracture Simulation of Constructional Steels Based on Yield-to-Fracture Stress–Strain Relationship and Micromechanism-Based Fracture Criterion vol.144, pp.3, 2018, https://doi.org/10.1061/(ASCE)ST.1943-541X.0001970
  7. Hydraulic fracturing experiments of highly deviated well with oriented perforation technique vol.6, pp.2, 2014, https://doi.org/10.12989/gae.2014.6.2.153
  8. Ductile fracture prediction for welded steel connections under monotonic loading based on micromechanical fracture criteria vol.94, 2015, https://doi.org/10.1016/j.engstruct.2015.03.038
  9. Ductile cracking simulation procedure for welded joints under monotonic tension vol.60, pp.1, 2016, https://doi.org/10.12989/sem.2016.60.1.051
  10. Seismic low-cycle fatigue evaluation of welded beam-to-column connections in steel moment frames through global–local analysis vol.64, 2014, https://doi.org/10.1016/j.ijfatigue.2014.03.002
  11. Forensic Analysis of Link Fractures in Eccentrically Braced Frames during the February 2011 Christchurch Earthquake: Testing and Simulation vol.141, pp.5, 2015, https://doi.org/10.1061/(ASCE)ST.1943-541X.0001043
  12. A unified damage factor model for ductile fracture of steels with different void growth and shrinkage rates 2017, https://doi.org/10.1111/ffe.12758
  13. Rate-Dependent Progressive Collapse Resistance of Beam-to-Column Connections with Different Seismic Details vol.31, pp.2, 2017, https://doi.org/10.1061/(ASCE)CF.1943-5509.0000922
  14. Predicting the residual strength and deformability of corroded steel plate based on the corrosion morphology vol.152, 2017, https://doi.org/10.1016/j.conbuildmat.2017.07.035
  15. Prediction of fracture behavior of beam-to-column welded joints using micromechanics damage model vol.85, 2013, https://doi.org/10.1016/j.jcsr.2013.02.014
  16. Analyzing Fracture Behavior of Beam-Column Joints Using Micromechanical Fracture Models vol.744-746, pp.1662-7482, 2015, https://doi.org/10.4028/www.scientific.net/AMM.744-746.3
  17. Ultra-low Cycle Fatigue Fracture of High-Strength Steel Q460C and Its Weld vol.30, pp.11, 2018, https://doi.org/10.1061/(ASCE)MT.1943-5533.0002489
  18. Theoretical Study of Ductile Fracture in Steel Structures in the Presence of Spatial Variability in Toughness vol.144, pp.5, 2018, https://doi.org/10.1061/(ASCE)ST.1943-541X.0002008
  19. A cumulative damage model for extremely low cycle fatigue cracking in steel structure vol.62, pp.2, 2012, https://doi.org/10.12989/sem.2017.62.2.225
  20. A New Approach to Predict Cyclic Response and Fracture of Shear Links and Eccentrically Braced Frames vol.4, pp.None, 2012, https://doi.org/10.3389/fbuil.2018.00011
  21. Experimental and numerical investigation on seismic performance of corroded welded steel connections vol.174, pp.None, 2018, https://doi.org/10.1016/j.engstruct.2018.07.057
  22. Improvement of Cyclic Void Growth Model for Ultra-Low Cycle Fatigue Prediction of Steel Bridge Piers vol.12, pp.10, 2012, https://doi.org/10.3390/ma12101615
  23. Micromechanical Fracture Models of Q345 Steel and Its Weld vol.31, pp.11, 2012, https://doi.org/10.1061/(asce)mt.1943-5533.0002921
  24. Material Parameters in Void Growth Model for G20Mn5QT Cast Steel: Calibration and Verification vol.32, pp.3, 2020, https://doi.org/10.1061/(asce)mt.1943-5533.0003065
  25. Ductile Fracture Characterization of A36 Steel and Comparative Study of Phenomenological Models vol.33, pp.1, 2012, https://doi.org/10.1061/(asce)mt.1943-5533.0003543
  26. Effect of Corroded Surface Morphology on Ultra-Low Cycle Fatigue of Steel Bridge Piers vol.14, pp.3, 2012, https://doi.org/10.3390/ma14030666
  27. Numerical investigation on the flexural links of eccentrically braced frames with web openings vol.39, pp.2, 2012, https://doi.org/10.12989/scs.2021.39.2.171
  28. Experimental and Numerical Study of Combined High and Low Cycle Fatigue Performance of Low Alloy Steel and Engineering Application vol.14, pp.12, 2012, https://doi.org/10.3390/ma14123395
  29. A model for ultra low cycle fatigue damage prediction of structural steel vol.187, pp.None, 2021, https://doi.org/10.1016/j.jcsr.2021.106956
  30. Experimental investigation of failure mechanism of grid structure with bolted spherical joints vol.188, pp.None, 2022, https://doi.org/10.1016/j.jcsr.2021.107033
  31. Very low cycle fatigue life evaluation models and validation using notched compact tension test data vol.155, pp.None, 2022, https://doi.org/10.1016/j.ijfatigue.2021.106635
  32. Fracture prediction in transverse fillet welded joints of high strength structural steel vol.189, pp.None, 2012, https://doi.org/10.1016/j.jcsr.2021.107101