DOI QR코드

DOI QR Code

Post-buckling analysis of Timoshenko beams made of functionally graded material under thermal loading

  • Kocaturk, Turgut (Department of Civil Engineering, Yildiz Technical University, Davutpasa Campus) ;
  • Akbas, Seref Doguscan (Department of Civil Engineering, Yildiz Technical University, Davutpasa Campus)
  • Received : 2011.09.12
  • Accepted : 2012.02.21
  • Published : 2012.03.25

Abstract

This paper focuses on post-buckling analysis of functionally graded Timoshenko beam subjected to thermal loading by using the total Lagrangian Timoshenko beam element approximation. Material properties of the beam change in the thickness direction according to a power-law function. The beam is clamped at both ends. The considered highly non-linear problem is solved by using incremental displacement-based finite element method in conjunction with Newton-Raphson iteration method. As far as the authors know, there is no study on the post-buckling analysis of functionally graded Timoshenko beams under thermal loading considering full geometric non-linearity investigated by using finite element method. The convergence studies are made and the obtained results are compared with the published results. In the study, with the effects of material gradient property and thermal load, the relationships between deflections, end constraint forces, thermal buckling configuration and stress distributions through the thickness of the beams are illustrated in detail in post-buckling case.

Keywords

References

  1. Akbas, S.D. and Kocatürk, T. (2011), "Post-buckling analysis of a simply supported beam under uniform thermal loading", Sci. Res. Essay., 6(4), 1135-1142.
  2. Akbas, S.D. (2011), "Thermal post-buckling analysis of functionally graded beams", PhD Thesis Term Report on May and November, Institute of Science at Yildiz Technical University ( stanbul).
  3. Akbas, S.D. and Kocaturk, T. (2011), "Eksenel Dogrultuda Fonksiyonel derecelendirilmi Timoshenko kirisinin sicaklik etkisi alt ndaki burkulma sonrasi davranisinin incelenmesi (Post-buckling behavior of axially functionally graded Timoshenko beam under the influence of temperature)", XVII. Turkish National Mechanic Congress, Elazig, Turkey, In Print (in Turkish).
  4. Alibeigloo, A. (2010), "Thermoelasticity analysis of functionally graded beam with integrated surface piezoelectric layers", Compos. Struct., 92, 1535-1543. https://doi.org/10.1016/j.compstruct.2009.10.030
  5. Anandrao, K.S., Gupta, R.K., Ramchandran, P. and Rao, V. (2010), "Thermal post-buckling analysis of uniform slender functionally graded material beams", Struct. Eng. Mech., 36(5), 545-560. https://doi.org/10.12989/sem.2010.36.5.545
  6. Bhangale, R.K. and Ganesan, N. (2006), "Thermoelastic buckling and vibration behavior of a functionally graded sandwich beam with constrained viscoelastic core", J. Sound Vib., 295, 294-316. https://doi.org/10.1016/j.jsv.2006.01.026
  7. Carpinteri, A. and Paggi, M. (2008), "Thermo-elastic mismatch in nonhomogeneous beams", J. Eng. Mat., 61(2-4), 371-384. https://doi.org/10.1007/s10665-008-9212-8
  8. Ching, H.K. and Yen, S.C. (2005), "Meshless local Petrov-Galerkin analysis for 2D functionally graded elastic solids under mechanical and thermal loads", Composites: Part B, 36, 223-240. https://doi.org/10.1016/j.compositesb.2004.09.007
  9. Ching, H.K. and Yen, S.C. (2005), "Transient thermoelastic deformations of 2-D functionally graded beams under nonuniformly convective heat supply", Compos. Struct., 73, 381-393.
  10. Farid, M., Zahedinejad, P. and Malekzadeh, P. (2010), "Three-dimensional temperature dependent free vibration analysis of functionally graded material curved panels resting on two-parameter elastic foundation using a hybrid semi-analytic, differential quadrature method", Struct. Eng. Mech., 31(1), 2-13.
  11. Felippa, C.A., Retrieved May (2011), "Notes on nonlinear finite element methods", http://www.colorado.edu/ engineering/cas/courses.d/NFEM.d/NFEM.Ch09.d/NFEM.Ch09.pdf
  12. Inan, O., Dag, S. and Erdogan, F. (2005), "Three dimensional fracture analysis of FGM coatings", Mater. Sci. Forum, 492-493, 373-378.
  13. Kapuria, S., Bhattacharyya, M. and Kumar, A.N. (2008), "Theoretical modeling and experimental validation of thermal response of metal-ceramic functionally graded beams", J. Therm. Stresses, 31, 759-787. https://doi.org/10.1080/01495730802194292
  14. Ke, L.L., Yang, J. and Kitipornchai, S. (2009), "Postbuckling analysis of edge cracked functionally graded Timoshenko beams under end shortening", Compos. Struct., 90(2), 152-160. https://doi.org/10.1016/j.compstruct.2009.03.003
  15. Khdeir, A.A. (2001), "Thermal buclding of cross-ply laminated composite beams", Acta Mechanica, 149, 201-213. https://doi.org/10.1007/BF01261672
  16. Kiani, Y. and Eslami, M.R. (2010), "Thermal buckling analysis of functionally graded material beams, Int. J. Mech. Mater. Des., 6(3), 229-238. https://doi.org/10.1007/s10999-010-9132-4
  17. Kocatürk, T., im ek M. and Akba , .D. (2011), "Large displacement static analysis of a cantilever Timoshenko beam composed of functionally graded material", Sci. Eng. Compos. Mater., 18, 21-34.
  18. Kocatürk, T. and Akba , S.D. (2011), "Post-buckling analysis of Timoshenko beams with various boundary conditions under non-uniform thermal loading", Struct. Eng. Mech., 40(3), 347-371. https://doi.org/10.12989/sem.2011.40.3.347
  19. Librescua, L., Oha, S.Y. and Songb, O. (2005), "Thin-walled beams made of functionally graded materials and operating in a high temperature environment: vibration and stability", J. Therm. Stresses, 28, 649-712. https://doi.org/10.1080/01495730590934038
  20. Li, S.R., Zhang, J.H. and Zhao, Y.G. (2006), "Thermal Post-Buckling of functionally graded material Timoshenko beams", Appl. Math. Mech., 26(6), 803-810.
  21. Li, S.R., Su, H.D. and Cheng, C.J. (2009), "Free vibration of functionally graded material beams with surfacebonded piezoelectric layers in thermal environment", Appl. Math. Mech., 30(8), 969-982. https://doi.org/10.1007/s10483-009-0803-7
  22. Lim, C.W., Yang, Q. and Lu, C.F. (2009), "Two-dimensional elasticity solutions for temperature dependent inplane vibration of FGM circular arches", Compos. Struct., 90, 323-329. https://doi.org/10.1016/j.compstruct.2009.03.014
  23. Lu, C., Chen, W. and Zhong, Z. (2006), Two-dimensional thermoelasticity solution for functionally graded thick beams", Science in China Series G: Physics, Mechanics & Astronomy 49(4), 451-460. https://doi.org/10.1007/s11433-006-0451-2
  24. Malekzadeh, P., Haghighi, M.R.G. and Atashi, M.M. (2010), "Out-of-plane free vibration of functionally graded circular curved beams in thermal environment", Compos. Struct. 92(2), 541-552. https://doi.org/10.1016/j.compstruct.2009.08.040
  25. Mohammadia, M. and Drydena, J.R. (2008), "Thermal stress in a nonhomogeneous curved beam", J. Therm. Stresses, 31(7), 587-598. https://doi.org/10.1080/01495730801978471
  26. Na, K.S. and Kim, J.H. (2006), "Thermal postbuckling investigations of functionally graded plates using 3-D finite element method", Finite Elem. Analy. Des., 42(8-9), 749-756. https://doi.org/10.1016/j.finel.2005.11.005
  27. Nirmula, K., Upadhyay, P.C., Prucz, J. and Lyons, D. (2006), "Thermo-elastic Stresses in Composite Beams with Functionally Graded Layer", J. Reinf. Plast. Compos., 25(12), 1241-1254. https://doi.org/10.1177/0731684406059787
  28. Pradhan, S.C. and Murmu, T. (2009), "Thermo-mechanical vibration of FGM sandwich beam under variable elastic foundations using differential quadrature method", J. Sound Vib., 321, 342-362. https://doi.org/10.1016/j.jsv.2008.09.018
  29. Rahimi, G.H. and Davoodinik, A.R. (2008), "Thermal behavior analysis of the functionally graded Timoshenko's beam", IUST Int. J. Eng. Sci., 19(5-1), 105-113.
  30. Rastgo, A., Shafie, H. and Allahverdizadeh, A. (2005), "Instability of curved beams made of functionally graded material under thermal loading, International", J. Mech. Mater. Des., 2, 117-128. https://doi.org/10.1007/s10999-005-4446-3
  31. Reddy, J.N. (2004), An Introduction to Non-linear Finite Element Analysis, Oxford University Press Inc., New York.
  32. Sankar, B.V. and Tzeng, J.T. (2002), "Thermal stresses in functionally graded beams", AIAA J., 40(6), 1228-1232. https://doi.org/10.2514/2.1775
  33. Song, X. and Li, S. (2008), "Nonlinear stability of fixed-fixed FGM arches subjected to mechanical and thermal load", Adv. Mater. Res., 33-37, 699-706. https://doi.org/10.4028/www.scientific.net/AMR.33-37.699
  34. Xiang, H.J. and Yang, J. (2008), "Free and forced vibration of a laminated FGM Timoshenko beam of variable thickness under heat conduction", Composites: Part B, 39, 292-303. https://doi.org/10.1016/j.compositesb.2007.01.005
  35. Wakashima, K., Hirano, T. and Niino, M. (1990), "Space applications of advanced structural materials", ESA, SP: 303-397.
  36. Zienkiewichz, O.C. and Taylor, R.L. (2000), The Finite Element Method, Fifth Edition, Volume 2, Solid Mechanics, Butterworth-Heinemann, Oxford.

Cited by

  1. Stress Analysis of a Functionally Graded Micro/ Nanorotating Disk with Variable Thickness Based on the Strain Gradient Theory vol.08, pp.02, 2016, https://doi.org/10.1142/S1758825116500204
  2. Elasto-plastic pre- and post-buckling analysis of functionally graded beams under mechanical loading vol.229, pp.2, 2015, https://doi.org/10.1177/1464420713502908
  3. Large post-buckling behavior of Timoshenko beams under axial compression loads vol.51, pp.6, 2014, https://doi.org/10.12989/sem.2014.51.6.955
  4. Post-Buckling Analysis of Axially Functionally Graded Three-Dimensional Beams vol.07, pp.03, 2015, https://doi.org/10.1142/S1758825115500477
  5. Buckling and Vibration Analysis of Functionally Graded Carbon Nanotube-Reinforced Beam Under Axial Load vol.08, pp.01, 2016, https://doi.org/10.1142/S1758825116500083
  6. On Post-Buckling Behavior of Edge Cracked Functionally Graded Beams Under Axial Loads vol.15, pp.04, 2015, https://doi.org/10.1142/S0219455414500655
  7. Post-Buckling Analysis of Functionally Graded Three-Dimensional Beams Under the Influence of Temperature vol.36, pp.12, 2013, https://doi.org/10.1080/01495739.2013.788397
  8. Post-buckling analysis of Timoshenko beams with temperature-dependent physical properties under uniform thermal loading vol.44, pp.1, 2012, https://doi.org/10.12989/sem.2012.44.1.109
  9. Thermal post-buckling analysis of functionally graded beams with temperature-dependent physical properties vol.15, pp.5, 2013, https://doi.org/10.12989/scs.2013.15.5.481
  10. Hierarchical one-dimensional finite elements for the thermal stress analysis of three-dimensional functionally graded beams vol.153, 2016, https://doi.org/10.1016/j.compstruct.2016.06.012
  11. Post-buckling finite strip analysis of thick functionally graded plates vol.49, pp.5, 2014, https://doi.org/10.12989/sem.2014.49.5.569
  12. Geometrically Nonlinear Static Analysis of Edge Cracked Timoshenko Beams Composed of Functionally Graded Material vol.2013, 2013, https://doi.org/10.1155/2013/871815
  13. Thermal effect on the dynamic response of axially functionally graded beam subjected to a moving harmonic load vol.127, 2016, https://doi.org/10.1016/j.actaastro.2016.05.030
  14. Non-linear thermal post-buckling analysis of FGM Timoshenko beam under non-uniform temperature rise across thickness vol.19, pp.3, 2016, https://doi.org/10.1016/j.jestch.2016.05.014
  15. Geometrically nonlinear analysis of planar beam and frame structures made of functionally graded material vol.49, pp.6, 2014, https://doi.org/10.12989/sem.2014.49.6.727
  16. Forced Vibration Analysis of Functionally Graded Nanobeams vol.09, pp.07, 2017, https://doi.org/10.1142/S1758825117501009
  17. Modeling and analysis of functionally graded sandwich beams: A review pp.1537-6532, 2018, https://doi.org/10.1080/15376494.2018.1447178
  18. Post-buckling responses of functionally graded beams with porosities vol.24, pp.5, 2017, https://doi.org/10.12989/scs.2017.24.5.579
  19. Rotating effects on hygro-mechanical vibration analysis of FG beams based on Euler-Bernoulli beam theory vol.63, pp.4, 2012, https://doi.org/10.12989/sem.2017.63.4.471
  20. Nonlinear static analysis of functionally graded porous beams under thermal effect vol.6, pp.4, 2017, https://doi.org/10.12989/csm.2017.6.4.399
  21. Post-buckling responses of a laminated composite beam vol.26, pp.6, 2012, https://doi.org/10.12989/scs.2018.26.6.733
  22. Geometrically nonlinear analysis of a laminated composite beam vol.66, pp.1, 2012, https://doi.org/10.12989/sem.2018.66.1.027
  23. Large deflection analysis of a fiber reinforced composite beam vol.27, pp.5, 2012, https://doi.org/10.12989/scs.2018.27.5.567
  24. Geometrically nonlinear analysis of functionally graded porous beams vol.27, pp.1, 2012, https://doi.org/10.12989/was.2018.27.1.059
  25. Thermal post-buckling analysis of a laminated composite beam vol.67, pp.4, 2018, https://doi.org/10.12989/sem.2018.67.4.337
  26. Hygro-thermal post-buckling analysis of a functionally graded beam vol.8, pp.5, 2019, https://doi.org/10.12989/csm.2019.8.5.459
  27. Thermo-Mechanical Post Buckling Analysis of Multiwall Carbon Nanotube-Reinforced Composite Laminated Beam under Elastic Foundation vol.6, pp.1, 2012, https://doi.org/10.1515/cls-2019-0018
  28. Dynamic analysis of nanosize FG rectangular plates based on simple nonlocal quasi 3D HSDT vol.7, pp.3, 2012, https://doi.org/10.12989/anr.2019.7.3.191
  29. Dynamic responses of laminated beams under a moving load in thermal environment vol.35, pp.6, 2012, https://doi.org/10.12989/scs.2020.35.6.729