DOI QR코드

DOI QR Code

Reliability analysis of tested steel I-beams with web openings

  • 투고 : 2011.09.07
  • 심사 : 2012.01.28
  • 발행 : 2012.03.10

초록

This paper presents a reliability analysis of steel I-beams with rectangular web openings, based on a combination of the common probabilistic reliability methods, such as RSM, FORM and SORM and using data obtained from experimental tests performed at the Istanbul Technical University. A procedure is proposed to obtain the optimum design load that can be applied to this type of structural members, by taking into account specified target values of reliability indices for ultimate and serviceability limit states. The goal of the paper is to present an algorithm to obtain more realistic and economical design of beams and to demonstrate that it can be applied efficiently to steel I-beams with web openings. Finally, a sensitivity analysis is performed allowing to ranking the random variables according to their importance in the reliability analysis.

키워드

참고문헌

  1. Allaix, D.L. and Carbone, V.I. (2011), "An improvement of the response surface method", Struct. Saf., 33, 165-172. https://doi.org/10.1016/j.strusafe.2011.02.001
  2. Bayramoglu, G. (1991), "Experimental study of the rectangular web openings with 1/2 NPI chords", Ph.D Thesis, Faculty of Civil Engineering, Istanbul Technical University. (in Turkish)
  3. Bayramoglu, G. (1996), "Deflection behaviour of steel I-beams having rectangular web openings", Bull. Tech. Univ. Istanbul, 49(3-4), 653-661.
  4. Bucher, C.G. and Bourgund, U. (1990), "A fast and efficient response surface approach for structural reliability problems", Struct. Saf., 7(1), 57-66. https://doi.org/10.1016/0167-4730(90)90012-E
  5. Buonopane, S.G. and Schafer, B.W. (2006), "Reliability of steel frames designed with advanced analysis", J. Struct. Eng.-ASCE, 132(2), 267-276. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:2(267)
  6. Chen, J.B. and Li, J. (2007), "Development process of nonlinearity based reliability evaluation of structures", Probab. Eng. Mech., 22, 267-275. https://doi.org/10.1016/j.probengmech.2007.03.001
  7. Chen, J.B. and Li, J. (2007), "The extreme value distribution and dynamic reliability analysis of nonlinear structures with uncertain parameters", Struct. Saf., 29, 77-93. https://doi.org/10.1016/j.strusafe.2006.02.002
  8. Cheng, J. and Xiao, R.C (2005), "Serviceability reliability analysis of cable-stayed bridges", Struct. Eng. Mech., 20(6), 609-630. https://doi.org/10.12989/sem.2005.20.6.609
  9. Cheng, J., Cai, C.S., Xiao, R.C. and Chen, S.R. (2005), "Flutter reliability analysis of suspension bridges", J. Wind. Eng. Ind. Aerod., 93, 757-775. https://doi.org/10.1016/j.jweia.2005.08.003
  10. Cheng, J., Xiao, R.C. and Jiang, J.J. (2004), "Probabilistic determination of initial cable forces of cable-stayed bridges under dead loads", Struct. Eng. Mech., 17(2), 267-279. https://doi.org/10.12989/sem.2004.17.2.267
  11. European Committee for Standardization (CEN), EN 1990 (2002), Eurocode: Basis of Structural Design, Brussels.
  12. European Committee for Standardization (CEN), EN 1993-1-8 (2005), Eurocode 3: Design of Steel Structures - Part 1.8: Design of Joints, Brussels.
  13. Foschi, R.O., Li, H. and Zhang, J. (2002), "Reliability and performance-based design: a computational approach and applications", Struct. Saf., 24, 205-218. https://doi.org/10.1016/S0167-4730(02)00025-5
  14. Gavin, H.P. and Yau, S.C. (2008), "High-order limit state functions in the response surface method for structural reliability analysis" Struct. Saf., 30, 162-179. https://doi.org/10.1016/j.strusafe.2006.10.003
  15. Haldar, A. and Mahadevan, S. (2000), Reliability Assessment Using Stochastic Finite Element Analysis, John Wiley & Sons, Toronto.
  16. Haldar, A. and Mahadevan, S. (2000), Probability, Reliability and Statistical Methods in Engineering Design, John Wiley & Sons, NY.
  17. Harbitz, A. (1983), "Efficient and accurate probability of failure calculation by use of the importance sampling technique", Proceedings of the Firth International Conference on Applied of Statistic and Probabilistic in Soils and Structural Engineering, ICASP-4, Bologna, June.
  18. Hohenbichler, M. and Rackwitz, R. (1988), "Improvement of second-order reliability estimates by importance sampling", J. Eng. Mech.-ASCE, 114(2), 2195-2199. https://doi.org/10.1061/(ASCE)0733-9399(1988)114:12(2195)
  19. Huh, J. and Haldar, A. (2002), "Seismic reliability of non-linear frames with PR connections using systematic RSM", Probab. Eng. Mech., 17, 177-190. https://doi.org/10.1016/S0266-8920(02)00002-4
  20. Karamchandani, A., Bjerager, P. and Cornell, A.C. (1989), "Adaptive importance sampling", Proceedings of International Conference on Structural Safety and Reliability, ICOSSAR, San Francisco, August.
  21. Liu, Y.W. and Moses, F. (1994), "A sequential response surface method and its application in the reliability analysis of aircraft structural systems", Struct. Saf., 16, 39-46. https://doi.org/10.1016/0167-4730(94)00023-J
  22. Melchers, R.E. (1999), Structural Reliability Analysis and Prediction, John Wiley & Sons, Chichester.
  23. Rackwitz, R. (2001), "Reliability analysis-a review and some perspectives", Struct. Saf., 23, 365-395. https://doi.org/10.1016/S0167-4730(02)00009-7
  24. Rajashekhar, M.R. and Ellingwood, B.R. (1993), "A new look at the response surface approach for reliability analysis", Struct. Saf., 12(3), 205-220. https://doi.org/10.1016/0167-4730(93)90003-J
  25. Sakurai, S., Ellingwood, B.R. and Kushiyama, S. (2001), "Probabilistic study of the behaviour of steel frames with partially restrained connections", Eng. Struct., 23, 1410-1417.
  26. Shinozuka, M. (1983), "Basic analysis of structural safety", J. Struct. Eng.-ASCE, 109(3), 721-740. https://doi.org/10.1061/(ASCE)0733-9445(1983)109:3(721)
  27. Skejic, D., Dujmovic, D. and Androic, B. (2008), "Reliability of the bending resistance of welded beam-tocolumn joints", J. Constr. Steel Res., 64, 388-399. https://doi.org/10.1016/j.jcsr.2007.09.003
  28. Zhao, Y.G. and Ono, T. (1999), "A general procedure for first/second-order reliability method (FORM/SORM)", Struct. Saf., 21, 95-112. https://doi.org/10.1016/S0167-4730(99)00008-9
  29. Zhao, Y.G. and Ono, T. (2001), "Moment methods for structural reliability", Struct. Saf., 23, 47-75. https://doi.org/10.1016/S0167-4730(00)00027-8

피인용 문헌

  1. Stochastic finite element based reliability analysis of steel fiber reinforced concrete (SFRC) corbels vol.15, pp.2, 2015, https://doi.org/10.12989/cac.2015.15.2.279
  2. Review and Assessment of Design Methodologies for Perforated Steel Beams vol.142, pp.2, 2016, https://doi.org/10.1061/(ASCE)ST.1943-541X.0001421
  3. The beneficial effects of beam web opening in seismic behavior of steel moment frames vol.13, pp.1, 2012, https://doi.org/10.12989/scs.2012.13.1.035
  4. Experimental investigation for failure analysis of steel beams with web openings vol.23, pp.6, 2012, https://doi.org/10.12989/scs.2017.23.6.647