Structural Engineering and Mechanics

  • 제41권1호
  • /
  • Pages.95-112
  • /
  • 2012
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Experimental hysteretic behavior of in-plane loaded reinforced grouted multi-ribbed aerated concrete blocks masonry walls

  • Li, Sheng-Cai (School of Civil Engineering, Huaqiao University) ;
  • Dong, Jian-Xi (School of Civil Engineering, Huaqiao University) ;
  • Li, Li-Feng (School of Civil Engineering, Huaqiao University)
  • 투고 : 2010.02.07
  • 심사 : 2011.12.13
  • 발행 : 2012.01.10
⟨ 이전 논문 다음 논문 ⟩

초록

In order to analyze the experimental hysteretic behavior of the in-plane loaded reinforced grouted multi-ribbed aerated concrete blocks masonry walls (RGMACBMW), we have carried out the pseudo static testing on the six specimens of RGMACBMW. Based on the test results and shear failure characteristics, the shear force hysteretic curves and displacement envelope curves of the models were obtained and discussed. On the basis of the hysteretic curves a general skeleton curve of the shear force and displacement was formed. The restoring model was adopted to analyze the seismic behavior and earthquake response of RGMACBMW. The deformation capacity of the specimens was discussed, and the formulas for calculating the lateral stiffness of the walls at different loading stages were proposed as well. The average lateral displacement ductility factor of RGMACBMW calculated based on the test results was 3.16. This value illustrates that if the walls are appropriately designed, it can fully meet the seismic requirement of the structures. The quadri-linear restoring models of the walls degradation by the test results accurately reflect the hysteretic behaviors and skeleton curves of the masonry walls. The restoring model can be applied to the RGMACBMW structure in earthquake response analysis.

키워드

참고문헌

  1. Atkinson, R.H. and Hammons, M.I. (1997), "Tension Stiffening Behavior of Reinforced Masonry", J. Struct. Eng., 123(5), 597-603. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:5(597)
  2. Drysdale, R.G. and Khattab, M.M. (1995), "In-Plane Behavior of Grouted Concrete Masonry under Biaxial Tension-Compression", ACI Struct. J., 92(6), 653-664.
  3. Li, S.C. and Zeng, Z.X. (2005), "Research on energy-saving block and invisible multi-ribbed frame structure", Proceeding of the third specialty conference on the conceptual approach to structural design, Singapore, August.
  4. National Standard of the People's Republic of China, (1998) "Test Methods of Aerated concrete", (GB/ T11969-11975-1997[S], Standards Press of China, Beijing. (in Chinese)
  5. National Standard of the People's Republic of China (2002) "Metallic Materials Tensile Testing at Ambient Temperature", (GB/T 228-2002) [S], Standards Press of China, Beijing. (in Chinese)
  6. National Standard of the People's Republic of China (2003) "Standard for test method of mechanical properties on ordinary concrete", (GB/T50081-2002) [S], China Architecture and Building Press, Beijing. (in Chinese)
  7. Shedid, M., Drysdale, R.G. and El-Dakhakhni, W. (2008), "Behavior of Fully Grouted Reinforced Concrete Masonry Shear Walls Failing in Flexure: Experimental Results", J. Struct. Eng., 134(11), 1754-1767. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:11(1754)
  8. Shedid, M., Drysdale, R.G. and El-Dakhakhni, W. (2009), "Behavior of fully grouted reinforced concrete masonry shear walls failing in flexure: analysis", Eng. Struct., 31(9), 2032-2044. https://doi.org/10.1016/j.engstruct.2009.03.006
  9. Shing, P.B., Schuller, M. and Hoskere, V.S. (1990a), "In-plane resistance of reinforced masonry shear walls", J. Struct. Eng., ASCE, 116(3), 619-640. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:3(619)
  10. Shing, P.B., Schuller, M., Hoskere, V.S., and Cater, E. (1990b), "Flexural and shear response of reinforced masonry walls", ACI Struct. J., 87(6), 646-656.
  11. Tikalsky, P.J., Atkinson, R.H. and Hammons, M.I. (1995), "Compressive Strength of Reinforced Masonry under Lateral Tension", J. Struct. Eng., 121(2), 283-289. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:2(283)
  12. Tomazevic, M., Lutman, M. and Petkovic, L. (1996), "Seismic behaviour of masonry walls: experimental simulation", J. Struct. Eng., ASCE, 122(9), 1040-1047. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:9(1040)
  13. Tomazevic, M. and Lutman, M. (1996), "Seismic behaviour of masonry walls: modelling of hysteretic rules", J. Struct. Eng., ASCE, 122(9), 1048-1054. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:9(1048)
  14. Voon, K.C. and Ingham, J.M. (2006), "Experimental in-plane shear strength investigation of reinforced concrete masonry walls", J. Struct. Eng., ASCE, 132(3), 400-408. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:3(400)
  15. Voon, K.C. and Ingham, J.M. (2007), "Design expression for the in-plane shear strength of reinforced concrete masonry", J. Struct. Eng., ASCE, 133(5), 706-713. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:5(706)
  16. Wang, Z.M. (2003), Composite Materials Mechanics and Composite Materials Structural Mechanics, Science Press, Beijing. (in Chinese)
  17. Wei, C.Q., Zhou, X.G. and Ye, L.P. (2007), "Experimental study of masonry walls strengthened with CFRP", Struct. Eng. Mech., 25(6), 675-690. https://doi.org/10.12989/sem.2007.25.6.675
  18. Zhai, X. and Stewart, M.G. (2010), "Structural reliability analysis of reinforced grouted concrete block masonry walls in compression", Eng. Struct., 32(1), 106-114. https://doi.org/10.1016/j.engstruct.2009.08.020
  19. Zhao, D., Yao, Q.F. and Chen, P. (1999), "Lateral rigidity calculation of multi-ribbed lightweight frame", J. Xi'an Univ. Architect. Technol., 31(3), 18-21. (in Chinese)

피인용 문헌

  1. Experimental study on frame-supported multi-ribbed composite walls under low-reversed cyclic loading vol.20, pp.3, 2016, https://doi.org/10.1080/19648189.2015.1036126
  2. Analysis of the Stiffness Ratio at the Interim Layer of Frame-Supported Multi-Ribbed Lightweight Walls under Low-Reversed Cyclic Loading vol.6, pp.12, 2016, https://doi.org/10.3390/app6010021
  3. An Experimental Study of Frame-Supported Multi-Ribbed Composite Walls vol.18, pp.4, 2015, https://doi.org/10.1260/1369-4332.18.4.497
  4. Simplified Calculation Model and Finite-element Analysis of Frame-supported Ribbed-Grid Composite Slab Structure 2017, https://doi.org/10.1007/s12205-017-0457-5
  5. Anti-Seismic Behavior of Hybrid Masonry – RC Structure vol.629-630, pp.1662-9795, 2014, https://doi.org/10.4028/www.scientific.net/KEM.629-630.537
  6. Investigating loading rate and fibre densities influence on SRG - concrete bond behaviour vol.34, pp.6, 2020, https://doi.org/10.12989/scs.2020.34.6.877
  7. Filtration-induced pressure evolution in permeation grouting vol.75, pp.5, 2012, https://doi.org/10.12989/sem.2020.75.5.571