Structural Engineering and Mechanics

  • 제41권1호
  • /
  • Pages.83-94
  • /
  • 2012
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Assessment of a concrete arch bridge using static and dynamic load tests

  • Caglayan, B. Ozden (Department of Civil Engineering, Istanbul Technical University) ;
  • Ozakgul, Kadir (Department of Civil Engineering, Istanbul Technical University) ;
  • Tezer, Ovunc (Department of Civil Engineering, Istanbul Technical University)
  • 투고 : 2009.12.22
  • 심사 : 2011.12.13
  • 발행 : 2012.01.10
⟨ 이전 논문 다음 논문 ⟩

초록

Assessment of a monumental concrete arch bridge with a total length of 210 meters having three major spans of 30 meters and a height of 65 meters, which is located in an earthquake-prone region in southern part of the country is presented in this study. Three-dimensional finite element model of the bridge was generated using a commercially available general finite element analysis software and based on the outcomes of a series of in-depth acceleration measurements that were conducted on-site, the model was refined. By using the structural parameters obtained from the dynamic and the static tests, calibrated model of the bridge structure was obtained and this model was used for necessary calculations regarding structural assessment and evaluation.

키워드

참고문헌

  1. BE (1960), Brechnungsgrundlagen fur Stahlerne Eisenbahnbrucken, DB Deutsche Bahn, Munchen.
  2. Boothby, T. and Atamturktur, S. (2007), "A guide for the finite element analysis of historic load bearing masonry structures", Proceedings of the 10th North American Masonry Conference, St. Louis, Missouri.
  3. Boothby, T.E., Domalik, D.E. and Dalal, V.A. (1998), "Service load response of masonry arch bridges", J. Struct. Eng., ASCE, 124, 17-23. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:1(17)
  4. Brencich, A. and Sabia, D. (2007), "Experimental identification of a multi-span masonry bridge: The Tanaro Bridge", Construct. Build. Mater., 22, 2087-2099.
  5. COSMOS/M (2008), User's manual, Solidworks Corporation, Dassault Systemes, Massachusetts.
  6. Fanning, P.J. and Boothby, T.E. (2001), "Three-dimensional modeling and full scale testing of stone arch bridges", Comput. Struct., 79, 2645-2662. https://doi.org/10.1016/S0045-7949(01)00109-2
  7. Fanning, P.J., Boothby, T.E. and Roberts, B.J. (2001), "Longitudinal and transverse effects in masonry arch assessment", Const. Build. Mater., 15, 51-60. https://doi.org/10.1016/S0950-0618(00)00069-6
  8. Felber, A.J. (1993), ''Development of a hybrid bridge evaluation system'', PhD Thesis, Univ. of British Columbia, Canada.
  9. Fryba, L. and Pirner, M. (2001), "Load tests and modal analysis of bridges", Eng. Struct., 23, 102-109. https://doi.org/10.1016/S0141-0296(00)00026-2
  10. Gentile, C. (2006), "Modal and structural identification of a R.C. arch bridge", Struct. Eng. Mech., 22(1), 53-70. https://doi.org/10.12989/sem.2006.22.1.053
  11. Marefat, M.S., Ghahremani-Gargary, E. and Ataei, S. (2004), "Load test of a plain concrete arch railway bridge of 20-m span", Constr. Build. Mater., 18, 661-667. https://doi.org/10.1016/j.conbuildmat.2004.04.025
  12. MATLAB 2009b (2009), Spline Toolbox and Optimization Toolbox, The Mathworks, Natick, MA.
  13. Nashif, A., Jones, D. and Henderson, J. (1985), Vibration damping, John Wiley & Sons, New York.
  14. Robert-Nicoud, Y., Raphael, B., Burdet, O. and Smith, I.F.C. (2005), "Model identification of bridges using measurement data", Computer-Aided Civil Inf. Eng., 20, 118-131. https://doi.org/10.1111/j.1467-8667.2005.00381.x
  15. Sanli, A.K., Uzgider, E.A., Caglayan, O.B., Ozakgul, K. and Bien, J. (2000), "Testing bridges by using tiltmeter measurements", J. Transp. Res. Board., 1696, 111-117. https://doi.org/10.3141/1696-51
  16. UIC (1994), UIC 776-1 Loads to be considered in railway bridge design, International Union of Railways Code, Paris.

피인용 문헌

  1. Static load testing with temperature compensation for structural health monitoring of bridges vol.127, 2016, https://doi.org/10.1016/j.engstruct.2016.09.018
  2. Enhancing the Structural Performance of Masonry Arch Bridges with Ballast Mats vol.31, pp.5, 2017, https://doi.org/10.1061/(ASCE)CF.1943-5509.0001080
  3. Safety assessment of limestone-based engineering structures to be partially flooded by dam water: A case study from northeastern Turkey vol.209, 2016, https://doi.org/10.1016/j.enggeo.2016.05.003
  4. Concrete arch bridges built by lattice cantilevers vol.45, pp.5, 2013, https://doi.org/10.12989/sem.2013.45.5.703
  5. Long-term monitoring of relative displacements at the keystone of a masonry arch bridge 2018, https://doi.org/10.1002/stc.2144
  6. Evaluation of axle load increasing on a monumental masonry arch bridge based on field load testing vol.116, 2016, https://doi.org/10.1016/j.conbuildmat.2016.04.126
  7. Assessment of load carrying capacity and fatigue life expectancy of a monumental Masonry Arch Bridge by field load testing: a case study of veresk vol.59, pp.4, 2016, https://doi.org/10.12989/sem.2016.59.4.703
  8. Monitoring Bridge Dynamic Responses Using Fiber Bragg Grating Tiltmeters vol.17, pp.10, 2017, https://doi.org/10.3390/s17102390
  9. Assessing ballast cleaning as a rehabilitation method for railway masonry arch bridges by dynamic load tests 2017, https://doi.org/10.1177/0954409717710047
  10. Influence of corrosion-induced cracking on structural behavior of reinforced concrete arch ribs vol.117, 2016, https://doi.org/10.1016/j.engstruct.2016.03.008
  11. Mobile Impact Testing for Structural Flexibility Identification with only a Single Reference vol.30, pp.9, 2015, https://doi.org/10.1111/mice.12112
  12. Assessment of load carrying capacity enhancement of an open spandrel masonry arch bridge by dynamic load testing 2017, https://doi.org/10.1080/15583058.2017.1317882
  13. Comparative Test Analysis for Determining Dynamic Deflection by Using GNSS/RTK, Trigonometric Leveling and Elevation of Sight vol.694-697, pp.1662-8985, 2013, https://doi.org/10.4028/www.scientific.net/AMR.694-697.374
  14. A Rapid Detection Method for Bridges Based on Impact Coefficient of Standard Bumping vol.2018, pp.1563-5147, 2018, https://doi.org/10.1155/2018/9195289
  15. Ballast Cleaning as a Solution for Controlling Increased Bridge Vibrations due to Higher Operational Speeds vol.32, pp.5, 2018, https://doi.org/10.1061/(ASCE)CF.1943-5509.0001194
  16. Implementing Relative Deflection of Adjacent Blocks in Model Calibration of Masonry Arch Bridges vol.32, pp.4, 2018, https://doi.org/10.1061/(ASCE)CF.1943-5509.0001171
  17. Evaluation of the parameters affecting the Schmidt rebound hammer reading using ANFIS method vol.21, pp.5, 2018, https://doi.org/10.12989/cac.2018.21.5.525
  18. Estimation of vehicle-induced bridge dynamic responses using fiber Bragg grating strain gages vol.103, pp.1, 2012, https://doi.org/10.1177/0036850419874201
  19. 수직재 간격비에 따른 개복식 상로 아치교의 충격계수 변화 분석 vol.24, pp.5, 2012, https://doi.org/10.11112/jksmi.2020.24.5.45