Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Shear mechanism and bearing capacity calculation on steel reinforced concrete special-shaped columns

  • Xue, J.Y. (College of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Chen, Z.P. (College of Civil and Architectural Engineering, Guangxi University) ;
  • Zhao, H.T. (College of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Gao, L. (College of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Liu, Z.Q. (College of Civil Engineering, Xi'an University of Architecture and Technology)
  • Received : 2009.08.18
  • Accepted : 2012.09.14
  • Published : 2012.11.25
⟨ Previous Next ⟩

Abstract

An experimental study was performed to investigate the seismic performance of steel reinforced concrete (SRC) special-shaped columns. For this purpose, 17 steel reinforced concrete special-shaped column specimens under low-cyclic reversed load were tested, load process and failure patterns of the specimens with different steel reinforcement were observed. The test results showed that the failure patterns of these columns include shear-diagonal compression failure, shear-bond failure, shear-flexure failure and flexural failure. The failure mechanisms and characteristics of SRC special-shaped columns were also analyzed. For different SRC special-shaped columns, based on the failure characteristics and mechanism observed from the test, formulas for calculating ultimate shear capacity in shear-diagonal compression failure and shear-bond failure under horizontal axis and oblique load were derived. The calculated results were compared with the test results. Both the theoretical analysis and the experimental results showed that, the shear capacity of T, L shaped columns under oblique load are larger than that under horizontal axis load, whereas the shear capacity of +-shaped columns under oblique load are less than that under horizontal axis load.

Keywords

References

  1. Chen, Z. P. (2007), Study on basic mechanic behavior and seismic performance of steel reinforced concrete special-shaped columns. Xi'an: Xi'an University of Architecture and Technology
  2. Chen, Z. P., Xue, J. Y., and Zhao, H. T. (2007), "Experimental research on seismic behavior of steel reinforced concrete special-shaped columns", Journal of Building Structures, 28(3), 53-61.
  3. Hidetaka, U. (1984), "Short rectangular RC columns under bilateral loadings", Journal of Structural Engineering, 110(3), 605-618. https://doi.org/10.1061/(ASCE)0733-9445(1984)110:3(605)
  4. Hsu, H. L. and Wang, C. L. (2000), "Flexural-torsional behavior of steel reinforced concrete members subjected to repeated loading", J. Earthq. Eng. Struct. Dyn., 29(5), 667-682. https://doi.org/10.1002/(SICI)1096-9845(200005)29:5<667::AID-EQE930>3.0.CO;2-Y
  5. Li, Z., Zhang, X. F., Guo, Z. Y., and Xu, Kai. (2007), "Experimental study on the mechanical property of steel reinforced concrete short columns of T-shaped cross-section", Journal of China Civil Engineering, 40(1), 1-5.
  6. Chen, Z. P. (2004), Research on bearing capacity of steel truss SRC asymmetrical T-shaped columns. Nanning: Guangxi University.
  7. Liao, L. P. (2006), Experiment research on seismic behavior of steel reinforced concrete L-shaped section column. Nan'ning: Guangxi University.
  8. Xu, Y. F. (2009), "Experimental study on the biaxial eccentric pressure bearing capacity of Cross-shaped steel reinforced concrete columns", Journal of Shenyang Architecture University (Natural science edition), 25(1), 100-105.
  9. Yang, T. (2007), "Research on seismic behavior of frame with T-shaped SRC columns", Journal of Civil, Architectural & Environmental Engineering, 31(2), 33-37.
  10. Liu, Y., Zhao, H. T., and Xue, J. Y., et al. (2008), "Nonlinear analysis of steel reinforced concrete special-shaped column", Journal of Xi'an University of Architecture and Technology (Natural science edition), 40(3), 312-316, 340.
  11. Liu, Y., Zhao, H. T., and Xue, J. Y. (2009), "Experimental research on restoring force model of SRC specialshaped columns", Journal of Earthquake Engineering and Engineering Vibration, 29(2), 86-91.
  12. Maruyama, K., Ramirez, H., and Jirsa, J. O. (1984), "Short RC columns under bilateral load histories", J. Struct. Eng., 110(2), 120-137. https://doi.org/10.1061/(ASCE)0733-9445(1984)110:1(120)
  13. Wang, L. J., Wang, T. C., and Wang, S. (2006), "Experimental study on shear behavior of reinforced concrete frame columns under bilateral horizontal loads", Journal of Building Structures, 27(4), 96-102.
  14. Xu, Y. F., Song, B. F., and Li, G. (2007), "Testing of axial pressure bearing capacity of cross shaped steel reinforced concrete columns", Journal of Shenyang Jianzhu University (Natural Science), 23(6), 910-913.
  15. Xue, J. Y. and Zhao, H. T. (2007), "Bond-slip theorem of steel reinforced concrete structures and its applications", Science Press, Beijing, China.
  16. Yan, S. C., Kang, G. Y., and Wang, Y. Q., et al. (2007), Comprehension and application of technical specification for concrete structures with special-shaped columns. Building Industry Press, Beijing, China.
  17. Yin, Z. L., Zhang, Y., and Wang, Z. D. (1990), Torsion-resistance. China Railway Press, Beijing, China.
  18. Zhao, H. T. (2001), Steel and concrete composite structures, Science Press, Beijing, China.
  19. Zhao, S. C. (2004), Steel Reinforced concrete composite structure computation theory. South-West Jiaotong University, Chengdu, China.

Cited by

  1. Hysteretic behavior of special shaped columns composed of steel and reinforced concrete (SRC) vol.14, pp.2, 2015, https://doi.org/10.1007/s11803-015-0026-1
  2. Seismic behavior of steel reinforced concrete (SRC) T-shaped column-beam planar and 3D hybrid joints under cyclic loads vol.8, pp.3, 2015, https://doi.org/10.12989/eas.2015.8.3.555
  3. Earthquake Damage Evaluation of T-Shaped SRC Composite Column-Steel Beams in 3D Connection Joints vol.18, pp.5, 2015, https://doi.org/10.1260/1369-4332.18.5.701
  4. Axial compression ratio limit values for steel reinforced concrete (SRC) special shaped columns vol.20, pp.2, 2016, https://doi.org/10.12989/scs.2016.20.2.295
  5. Numerical analysis and horizontal bearing capacity of steel reinforced recycled concrete columns vol.22, pp.4, 2016, https://doi.org/10.12989/scs.2016.22.4.797
  6. Seismic behavior of T-shaped steel reinforced high strength concrete short-limb shear walls under low cyclic reversed loading vol.57, pp.4, 2016, https://doi.org/10.12989/sem.2016.57.4.681
  7. Seismic behavior of steel reinforced concrete special-shaped column-beam joints vol.11, pp.4, 2016, https://doi.org/10.12989/eas.2016.11.4.665
  8. Cyclic test for solid steel reinforced concrete frames with special-shaped columns vol.7, pp.3, 2014, https://doi.org/10.12989/eas.2014.7.3.317
  9. Research on damage of solid-web steel reinforced concrete T-shaped columns subjected to various loadings vol.24, pp.4, 2012, https://doi.org/10.12989/scs.2017.24.4.409
  10. Seismic response of steel reinforced concrete spatial frame with irregular section columns under earthquake excitation vol.14, pp.4, 2012, https://doi.org/10.12989/eas.2018.14.4.337
  11. Compressive and flexural behaviors of ultra-high strength concrete encased steel members vol.33, pp.6, 2012, https://doi.org/10.12989/scs.2019.33.6.849
  12. Mechanical behaviour of composite columns composed of RAC-filled square steel tube and profile steel under eccentric compression loads vol.38, pp.1, 2012, https://doi.org/10.12989/scs.2021.38.1.103
  13. Seismic behavior of reinforced concrete T-shaped columns under compression-bending-shear and torsion vol.20, pp.4, 2012, https://doi.org/10.12989/eas.2021.20.4.431
  14. Experimental and numerical study on seismic performance of steel reinforced concrete spatial frame with irregular section columns vol.242, pp.None, 2012, https://doi.org/10.1016/j.engstruct.2021.112507
  15. Damage and quantitative indexes for steel reinforced concrete column with T-shaped section vol.46, pp.None, 2012, https://doi.org/10.1016/j.jobe.2021.103779