Steel and Composite Structures

  • 제12권5호
  • /
  • Pages.395-412
  • /
  • 2012
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Experimental behaviour of composite beams subjected to a hogging moment

  • 투고 : 2010.08.24
  • 심사 : 2012.03.19
  • 발행 : 2012.05.25
⟨ 이전 논문 다음 논문 ⟩

초록

The present work addresses the rotational capacity of steel-concrete composite beams, which is a key issue for the seismic design of composite frames. Several experimental tests from the literature are summarised, and the effects of various parameters on the available plastic rotation are discussed. Furthermore, a number of remarks are made regarding the need for supplementary experimental results. The authors carried out experimental tests on four composite beams in which the type, width and connection degree of the slab were varied. During the tests, the deflection and strains in the steel profiles and bars were measured and recorded, wherein the observed trends in the measured parameters indicated that the failure mode of the beam was influenced by global and local buckling. A comparison of the experimental results to the theoretical ultimate strengths and moment-curvature relationships confirms that buckling phenomena occurred after section yielding, even if a consistent plastic rotation developed. This rotational capacity is well evaluated by a formulation that is available in the literature.

키워드

참고문헌

  1. Amadio, C., Fedrigo, C., Fragiacomo, M. and Macorini, L. (2004), "Experimental evaluation of effective width in steel-concrete composite beams", J. Constr. Steel. Res., 60(2), 199-220. https://doi.org/10.1016/j.jcsr.2003.08.007
  2. Aribert, J.-M., Ciutina, A.L. and Dubina, D. (2004), "Seismic response of composite structures inclunding actual behaviour of beam-to-column joints", Proceedings of the 5th Conference on Composite Construction in Steel and Concrete, ASCE: Kruger National Park, South Africa, July
  3. Chen, S. and Jia, Y. (2008), "Required and available moment redistribution of continuous steel- concrete composite beams" J. Constr. Steel. Res., 64(2), 167-175. https://doi.org/10.1016/j.jcsr.2007.05.006
  4. DM 14 Genuary. (2008), Min. LL. PP, "Norme Tecniche per le Costruzioni (NTC)", Gazzetta Ufficiale della Repubblica Italiana, 29, Italian code in Italian.
  5. Elghazouli, A.Y., Castro, J.M. and Izzuddin, B.A. (2008), "Seismic performance of composite moment-resisting frames", Eng. Struct., 30(7), 1802-1819. https://doi.org/10.1016/j.engstruct.2007.12.004
  6. El-Tawil, S., Vidarsson, E., Mikesell, T. and Kunnath, S.K. (1999), "Inelastic behavior and design of steel panel zones", J. Struct. Eng., 125(2), ASCE.
  7. Eurocode 3. (2004), "Design of composite steel and concrete structures. Part 1.1: General rules and rules for buildings", European Committee for Standardisation, Brussels, Belgium.
  8. Eurocode 4. (2004), "Design of composite steel and concrete structures - Part 1.1: General rules and rules for buildings", ENV 1994-1.
  9. Eurocode 8. (2004), "Design provisions for earthquake resistance of structures. Part 1.3: General rules. Specific rules for various materials and elements", European Committee for Standardisation, Brussels, Belgium.
  10. Fabbrocino, G., Manfredi, G. and Cosenza, E. (2001), "Ductility of composite beams under negative bending: an equivalence index for reinforcing steel classification", J. Constr. Steel. Res., 57(2), 185-202. https://doi.org/10.1016/S0143-974X(00)00008-0
  11. Kemp, A.R. (1985), "Interaction of Plastic local and Lateral Buckling" J. Struct. Eng., ASCE, 111(10), 2181-2196. https://doi.org/10.1061/(ASCE)0733-9445(1985)111:10(2181)
  12. Kemp, A.R., Dekker, N.W. and Trinchero, E. (1995), "Differences in inelastic properties of steel and composite beams", J. Constr. Steel. Res., 34(2-3), 161-185. https://doi.org/10.1016/0143-974X(94)00045-J
  13. Kemp, A.R. and Nethercot, D.A. (2001), "Required and available rotations in composite beams with semi-rigid connections", J. Constr. Steel. Res., 57(4), 375-400. https://doi.org/10.1016/S0143-974X(00)00025-0
  14. Leon, R.T. (1998), "Analysis and design problems for PR composite flames subjected to seismic loads", Eng. Struct., 20(4-6), 364-371. https://doi.org/10.1016/S0141-0296(97)00149-1
  15. Loh, H.Y., Uy, B. and Bradford, M.A. (2004), "The effects of partial shear connection in the negative moment regions of composite beams, Part I - Experimental study", J. Constr. Steel. Res., 60(6), 897-919. https://doi.org/10.1016/j.jcsr.2003.10.007
  16. Nie, J., Fan, J. and Cai, C.S. (2008), "Experimental study of partially shear-connected composite beams with profiled sheeting", Eng. Struct., 30(1), 1-12. https://doi.org/10.1016/j.engstruct.2007.02.016
  17. Providakis, C.P. (2008), "Pushover analysis of base-isolated steel-concrete composite structures under near-fault excitations", Soil. Dyn. Earthq. Eng., 28, 293-304. https://doi.org/10.1016/j.soildyn.2007.06.012

피인용 문헌

  1. Experimental study on mechanical performances of lattice steel reinforced concrete inner frame with irregular section columns vol.16, pp.3, 2014, https://doi.org/10.12989/scs.2014.16.3.253
  2. Study on mechanical performance of composite beam with innovative composite slabs vol.21, pp.3, 2016, https://doi.org/10.12989/scs.2016.21.3.537
  3. Design and modelling of pre-cast steel-concrete composites for resilient railway track slabs vol.22, pp.3, 2016, https://doi.org/10.12989/scs.2016.22.3.537
  4. The experimental behavior and simple modeling of joints in composite MRFs vol.105, 2015, https://doi.org/10.1016/j.engstruct.2015.09.042
  5. Experimental and theoretical research on mechanical behavior of innovative composite beams vol.14, pp.4, 2013, https://doi.org/10.12989/scs.2013.14.4.313
  6. Mechanical behavior investigation of steel connections using a modified component method vol.25, pp.1, 2012, https://doi.org/10.12989/scs.2017.25.1.117
  7. Influence of shear bolt connections on modular precast steel-concrete composites for track support structures vol.27, pp.5, 2018, https://doi.org/10.12989/scs.2018.27.5.647
  8. Flexural Capacity of Steel-Concrete Composite Beams under Hogging Moment vol.2019, pp.None, 2012, https://doi.org/10.1155/2019/3453274
  9. Rotation Stiffness Investigation of Spatial Joints with End-Plate Connection vol.2019, pp.None, 2019, https://doi.org/10.1155/2019/8131052
  10. Evaluation of the plastic hinge length of steel-concrete composite beams under hogging moment vol.191, pp.None, 2012, https://doi.org/10.1016/j.engstruct.2019.04.077