DOI QR코드

DOI QR Code

Reliability of an elastic bar under tension in a corrosive environment

  • Elishakoff, Isaac (Department of Ocean and Mechanical Engineering, Florida Atlantic University) ;
  • Soret, Clement (Departement Structures et Mecanique des Materiaux, Institut Francais de Mecanique Avancee)
  • 투고 : 2012.03.27
  • 심사 : 2012.06.07
  • 발행 : 2012.09.25

초록

In this study we investigate the reliability of a bar subjected to a random tensile load in presence of corrosion. We consider linear, quadratic and exponential models that connect the stress in the bar with the corrosion rate. Two probability densities are considered for the load, with attendant derivation of the time-dependant reliability. The design time of operation is determined utilizing the requirement that the reliability must not be less than the required value.

키워드

참고문헌

  1. Dolinskii, V.M. (1967), "Analysis of loaded tubes subjected to corrosion", Khimicheskoe I Neftianoe Mashinoestrenie, (Chemical and Oil Machinery), (In Russian), 2(9-10).
  2. Duprat F. and Sellier A. (2006), "Probabilistic approach to corrosion risk due to carbonation via an adoptive response surface method", Probab. Eng. Mech., Vol.21, 207-216. https://doi.org/10.1016/j.probengmech.2005.11.001
  3. Elishakoff, I., Ghyselinck, G., and Miglis, Y. (2012), "Durability of an elastic bar under tension with linear or non-linear relationship between corrosion rate and stress", J. Appl. Mech., 79, 021013. https://doi.org/10.1115/1.4005564
  4. Gutman, E.M., Zainullin, R.S. and Zuripov, R.A. (1984), "Kinetics of mechanochemical collapse and durability of structural elements in tension under elastic-plastic deformations", Fiziko- Khimicheskaya Mekhanika Materiolov, (Physical-Chemical Mechanics of Materials), 2, 11-17
  5. Karimi, A.R. and Ramachandran, K. (2000), "Probabilistic estimation of corrosion in bridges due to chlorination, in applications of statistics and probability", (Eds., R.E. Melchers and M.G. Stewart), 681-688.
  6. Satverwaran, V., Smith, Y.W. and Blockley, D.I. (1998), "Reliability of corrosion-damaged steel structures using interval probability theory", Struct. Saf., 20(3), 237-255. https://doi.org/10.1016/S0167-4730(98)00009-5
  7. Stewart, M.G. and Mullard, J.A. (2007), "Spatial time-dependant reliability analysis of corrosion damage and the timing of first repair for RC structures", Eng. Struct., 29, 1457-1464. https://doi.org/10.1016/j.engstruct.2006.09.004
  8. Val, D.V. and Stewart, M.G. (2009), "Reliability assessment of ageing reinforced concrete structures - current situation and future challenges", Struct. Eng., 19(2), 211-219. https://doi.org/10.2749/101686609788220114

피인용 문헌

  1. Design of bars in tension or compression exposed to a corrosive environment vol.5, pp.1, 2015, https://doi.org/10.12989/ose.2015.5.1.021