Ocean Systems Engineering

  • 제2권2호
  • /
  • Pages.99-113
  • /
  • 2012
  • /
  • 2093-6702(pISSN)
  • /
  • 2093-677X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Semisubmersible platforms with Steel Catenary Risers for Western Australia and Gulf of Mexico

  • Zou, Jun (Houston Offshore Engineering)
  • 투고 : 2012.01.31
  • 심사 : 2012.04.23
  • 발행 : 2012.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

Steel Catenary Risers (SCR) are the simplest and often the most economic solution compared to other riser types such as flexible pipe, riser towers, top tensioned risers, etc. The top of a SCR is connected to the host platform riser porch. The other end of the SCR connects to flowlines from subsea wells. The riser touchdown point (TDP), which is the location along the riser where contact with the sea floor first occurs, exhibits complex behaviors and often results in compression and fatigue related issues. Heave dynamic responses of semisubmersibles in extreme and operating sea states are crucial for feasibility of SCR application. Recent full field measurement results of a deep draft semisubmersible in Hurricane Gustav displayed the considerable discrepancies in heave responses characteristics between the measured and the simulated results. The adequacy and accuracy of the simulated results from recognized commercial software should be examined. This finding raised the awareness of shortcomings of current commercial software and potential risk in mega investment loss and environmental pollutions due to SCR failures. One main objective of this paper is to attempt to assess the importance and necessity of accounting for viscous effects during design and analysis by employing indicator of viscous parameter. Since viscous effects increase with nearly third power of significant wave height, thus newly increased metocean criteria per API in central Gulf of Mexico (GoM) and even more severe environmental conditions in Western Australia (WA) call for fundamental enhancements of the existing analysis tools to ensure reliable and robust design. Furthermore, another aim of this paper is to address the impacts of metocean criteria and design philosophy on semisubmersible hull sizing in WA and GoM.

키워드

참고문헌

  1. A Moros, E.P.A., Cerkovnik, M., Fang, J. and Rasmussen, J. (2004), The use of SCRs with semi for the development of deep water prospects, DOT, Nov 30th Dec 2nd.
  2. API 2INT-MET (2007), Interim guidance on hurricane conditions in the Gulf of Mexico, 1st Ed., (draft), May.
  3. Berthelsen, P.A., Baarholm, R., Pakozdi, C., Stansberg, C.T., Hassan, A., Downle, M. and Incecik, A. (2009), "Viscous drift forces and responses on a semisubmersible platform in high waves", Proceedings of the International Conference on Ocean, Offshore and Arctic Engineering (OMAE).
  4. Chakrabarti, S.K. (1984), "Steady drift force on vertical cylinder - viscous vs. potential", Appl. Ocean Res., 6(2), 73-82. https://doi.org/10.1016/0141-1187(84)90044-0
  5. Choi, H.J. (2005), Kinematics measurements of regular, irregular, and rogue waves by PIV/LDV, Ph. D. Dissertation, Ocean Engineering Program, Texas A&M University.
  6. Dev, A.K. (1996), Viscous effects in drift forces on semi-submersibles, Ph. D. Dissertation, Delft University of Technology.
  7. Dev, A.K. and Pinkster (1997), "Viscous mean and low frequency drift forces on semi-submersibles", Proceedings of the International Conference on Behavior of Offshore Structures, BOSS'97 (8th), July 7-10.
  8. Ferretti, C. and Berta, M. (1980), "Viscous effects contribution to the drift forces on floating structures", Proceedings of the International Symposium of Ocean Engineering and Ship Handing, SSPA, Gothenburg, Sweden.
  9. Jesudasen, A.S., McShane, B.M., McDonald, W.J., Vandenbossche, M. and Souza, L.F. (2004), "Design considerations particular to SCRs supported by Spar buoy platform structures", Proceedings of the Offshore Technology Conference (OTC).
  10. Kim, C.H. and Zou, J. (1995), "A universal linear system model for kinematics and forces affected by nonlinear irregular waves", Int. J. Offshore Polar., 5(3), 166-170
  11. Ma, W., Lee, M.Y., Tule, J. and Zou, J. (2010), Full scale response verification of a deep draft semisubmersible production platform, Deepwater Offshore Technology (DOT).
  12. McCann, D., Smith, F. and O'Brien, P. (2003), "Guidelines for compression modeling in flexible risers for deepwater applications", Proceedings of the Offshore Technology Conference, Houston, Texas, 5 May-8 May.
  13. Pinkster, J.A., Dercksen, A. and Dev, A.K. (1993), "Hydrodynamic aspects of moored semisubmersibles and TLP's", Proceedings of the Offshore Technology Conference, Houston, Texas, 3 May-6 May.
  14. Zou, J. and Chianis, J. (2011), "Paired-column semisubmersible platform for wet tree with steel catenary riser application in offshore Western Australia", Proceedings of the International Conference on Ocean System Engineering, Seoul, Korea.

피인용 문헌

  1. Based on Fuzzy Comprehensive Evaluation Method The Investment Risk Assessment of Chinese Enterprises in The Countries Along “The Belt and Road” vol.108, 2018, https://doi.org/10.1088/1755-1315/108/4/042073
  2. Free vibration analysis of large sag catenary with application to catenary jumper vol.10, pp.1, 2020, https://doi.org/10.12989/ose.2020.10.1.067
  3. Nonlinear formulation and free vibration of a large-sag extensible catenary riser vol.11, pp.1, 2021, https://doi.org/10.12989/ose.2021.11.1.059