Ocean Systems Engineering

  • 제2권1호
  • /
  • Pages.49-68
  • /
  • 2012
  • /
  • 2093-6702(pISSN)
  • /
  • 2093-677X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Integrated engineering environment for the process FEED of offshore oil and gas production plants

  • Hwang, Ji-Hyun (Department of Naval Architecture and Ocean Engineering, Seoul National University) ;
  • Roh, Myung-Il (School of Naval Architecture and Ocean Engineering, University of Ulsan) ;
  • Lee, Kyu-Yeul (Department of Naval Architecture and Ocean Engineering, Research Institute of Marine Systems Engineering, Seoul National University)
  • 투고 : 2011.12.22
  • 심사 : 2012.03.07
  • 발행 : 2012.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, an offshore process front end engineering design (FEED) method is systematically introduced and reviewed to enable efficient offshore oil and gas production plant engineering. An integrated process engineering environment is also presented for the topside systems of a liquefied natural gas floating production, storage, and offloading (LNG FPSO) unit, based on the concepts and procedures for the process FEED of general offshore production plants. Various activities of the general process FEED scheme are first summarized, and then the offshore process FEED method, which is applicable to all types of offshore oil and gas production plants, is presented. The integrated process engineering environment is presented according to the aforementioned FEED method. Finally, the offshore process FEED method is applied to the topside systems of an LNG FPSO in order to verify the validity and applicability of the FEED method.

키워드

참고문헌

  1. Barclay, M. and Yang, C.C. (2006), "Offshore LNG : The perfect starting point for the 2 phase expander", Proceedings of the Offshore Technology Conference, Houston, USA.
  2. Barclay, M. nad Shukri, T. (2007), "Enhanced single mixed refrigerant process for stranded gas liquefaction", Proceedings of the LNG15 Conference, Barcelona, Spain.
  3. Doris Engineering (2012), http://www.doris-engineering.com.
  4. Hwang, J.H., Min, J.H., Ahn, Y.J., Kim, H.C., Roh, M.I. and Lee, K.Y. (2008), "Optimized methodology to build an integrated solution to offshore topside process engineering", Proceedings of the International Society of Offshore and Polar Engineers, Vancouver, Canada.
  5. International Maritime Associates (2010). Floating production systems, Annual Report, International Maritime Associates Inc.
  6. Jung, H.C, Lim, S.W. and Kim, Y.H. (2006), "An demand outlook of offshore oil production structures", Trans. Soc. Naval Archit. Korea (43), 49-57.
  7. Kim, H.S., Jun, S.H., Shim, C.S., Lee, G.Y., Nam, H.S., Kang, J.K., Shin, Y.G. and Heo, J.H. (2004), "The study on local strength analysis for floater type offshore structure", Proceedings of the Annual Autumn Meeting, The Society of Naval Architects of Korea, Sancheong, Korea.
  8. Kim, J.H., Cho, S.K., Hong, S.Y. and Kim, Y.S. (2006), "Experimental study on a dolphin-fender mooring system for pontoon-type structure", Trans. Soc. Naval Archit. Korea, 42(1), 43-49. https://doi.org/10.3744/SNAK.2005.42.1.043
  9. Lake, M., He, H., Troesch, A.W., Perlin, M. and Thiagarajan, K.P. (2000), "Hydrodynamic coefficients estimation for TLP and spar structures, J. Offshore Mech. Arct.,122(2), 118-124. https://doi.org/10.1115/1.533733
  10. Lee, H.Y., Shin, H.K., Lim, C.G., Kim, O.H., Kang, J.M. and Yoon, M.C. (2000), "Hydroelastic responses for a very large floating structure with a breakwater", Trans. Soc. Naval Archit. Korea, 38(2), 26-32.
  11. Lee, J.O., Lee, H.Y., Suh, Y.S. and Yoon, J.H. (1998), "Reliability of Fatigue Life Predictions for Fixed Offshore Structures", Trans. Soc. Naval Archit. Korea, 35(2), 74-82.
  12. Matsuura, J.P. and Bernitsas, M.M. (2006), "Routes to large amplitude motions of mooring systems due to slowly varying drift", J. Offshore Mech. Arct., 128(4), 280-285. https://doi.org/10.1115/1.2217752
  13. Mustang Engineering (2012), http://www.mustangeng.com.
  14. Na, J.H., Shim, W.S., Lee, I.H., Moon, J.S., Kim, J.W. and Shin, H.S. (2004), "FPSO quay mooring analysis in typhoon condition", Proceedings of the Annual Autumn Meeting, The Society of Naval Architects of Korea, Sancheong, Korea.
  15. Newman, J.N. and Lee, C.H. (2002), "Boundary-element methods in offshore structure analysis, J. Offshore Mech. Arct.,124(2), 81-89. https://doi.org/10.1115/1.1464561
  16. Shin, H.K., Lee, H.Y., Lim, C.G., Shin, H.S. and Park, I.G. (2000), "Motion of a very large floating structure in irregular waves", Trans. Soc. Naval Archit. Korea, 37(4), 75-81.
  17. Technip (2012), http://www.technip.com.

피인용 문헌

  1. Modelling and improving natural gas condensate process with stripping and heat integration vol.118, 2017, https://doi.org/10.1016/j.cep.2017.04.022
  2. 3.2.1 Developing empirical connections based on interrelation analysis between technical activities of systems engineering and FEED processes in plant - construction industry vol.24, pp.1, 2014, https://doi.org/10.1002/j.2334-5837.2014.tb03147.x
  3. Representing and constructing liquefaction cycle alternatives for FLNG FEED using system entity structure concepts vol.6, pp.3, 2014, https://doi.org/10.2478/IJNAOE-2013-0200
  4. Chaos Theory: Implications for Cost Overrun Research in Hydrocarbon Megaprojects vol.143, pp.2, 2017, https://doi.org/10.1061/(ASCE)CO.1943-7862.0001227