Membrane and Water Treatment

  • 제3권1호
  • /
  • Pages.25-34
  • /
  • 2012
  • /
  • 2005-8624(pISSN)
  • /
  • 2092-7037(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

New CPS-PPEES blend membranes for CaCl2 and NaCl rejection

  • Chitrakar, Hegde (Department of Chemistry, Nitte Meenakshi Institute of Technology) ;
  • Arun, M. Isloor (Membrane Technology Division, Department of Chemistry, National Institute of Technology-Karnataka) ;
  • Mahesh, Padaki (Membrane Technology Division, Department of Chemistry, National Institute of Technology-Karnataka) ;
  • Ahmad, Fauzi Ismail (Advanced Membrane Science & Technology Centre (AMTEC), Universiti Teknologi Malaysia) ;
  • Lau, W.J. (Advanced Membrane Science & Technology Centre (AMTEC), Universiti Teknologi Malaysia)
  • 투고 : 2011.07.24
  • 심사 : 2011.10.27
  • 발행 : 2012.01.25
⟨ 이전 논문 다음 논문 ⟩

초록

Carboxylated polysulfone (CPS), poly (1,4-phenylene ether ethersulfone) (PPEES), membranes were prepared and used for the separation of NaCl and $CaCl_2$, in efficient way with less energy consumption. In this work, nanofiltration and reverse osmosis membranes were employed to the salt rejection behavior of the different salt solutions. The influence of applied pressure (1-12 bar), on the membrane performance was assessed. In CM series of membranes, $CM_1$ showed maximum of 97% water uptake and 36% water swelling, whereas, $CM_4$ showed 75% water uptake and 28% water swelling. In RCM series, $RCM_1$ showed 85% water uptake and 32% water swelling whereas, in $RCM_4$ it was 68% for water uptake and 20% for water swelling. Conclusively reverse osmosis membranes gave better rejection whereas nanofiltration membrane showed enhanced flux. CM1 showed 58% of rejection with 12 L/($m^2$ h) flux and $RCM_1$ showed 55% of rejection with 15 L/($m^2$ h) flux for 0.1 wt.% NaCl solution. Whereas, in 0.1 wt.% $CaCl_2$ solution, membrane $CM_1$ showed 78% of rejection with 12 L/($m^2$ h) flux and $RCM_1$ showed 63% rejection with flux of 9 L/($m^2$ h).

키워드

참고문헌

  1. Andriy, E.Y. (2002), "Rejection of single salts versus transmembrane volume flow in RO/NF: thermodynamic properties, model of constant coefficients, and its modification", J. Membrane Sci., 98(2), 285-297.
  2. Bowen, W.R., Mohammad, A.W. and Hilal, N. (1997), "Characterization of nanofiltration membranes for predictive purposes-use of salts, uncharged solutes and atomic force microscopy", J. Membrane Sci., 126(1), 91-105. https://doi.org/10.1016/S0376-7388(96)00276-1
  3. Chitrakara, H., Arun, M.I., Mahesh, P., Pikul, W. and Liangdeng, Y. (2011),"Synthesis and desalination performance of $Ar^{+}-N^{+}$ irradiated polysulfone based new NF membrane", Desalination, 265(1-3),153-158. https://doi.org/10.1016/j.desal.2010.07.046
  4. Guiver, M.D., Croteau, S., Hazlett, J.D. and Kutowy, D. (1990), "Synthesis and characterization of carboxylated polysulfones", Br. Polym. J., 23(1-2), 29-39. https://doi.org/10.1002/pi.4980230107
  5. Han, M.J. and Bhattacharyya, D. (1994), "Morphology and transport study of phase inversion polysulfone membranes", Chem. Eng. Commun., 128(1), 197-209. https://doi.org/10.1080/00986449408936245
  6. Jiraratananon, R., Sungpet, A. and Luangsowan, P. (2000), "Performance evaluation of nanofiltration membranes for treatment of effluents containing reactive dye and salt", Desalination, 130(2), 177-183. https://doi.org/10.1016/S0011-9164(00)00085-0
  7. Kim, T.U., Amy, G. and Drewes, J.E. (2005), "Rejection of trace organic compounds by high-pressure membranes", Water Sci. Technol., 51(6-7), 335-344.
  8. Kimura, K., Amy, G., Drewes, J.E., Heberer, T., Kim, T.U. and Watanabe, Y. (2003), "Rejection of organic micropollutants (disinfection by-products,endocrine disrupting compounds, and pharmaceutically active compounds) by NF/RO membranes", J. Membrane Sci., 227(1-2), 113-121. https://doi.org/10.1016/j.memsci.2003.09.005
  9. Latha, C.S., Shanthanalakshmi, D., Mohan, D., Balu, K. and Kumarasamy, M.D.K. (2005), "Polyurethane and carboxylated polysulfone blend ultrafiltration membranes. I. Preparation and characterization", J. Appl. Polymer Sci., 97(3), 1307-1315. https://doi.org/10.1002/app.21831
  10. Lina, M., Remi, O.L., Blais, J.F. and Hausler, R. (2008), "Removal of metal ions from an acidic leachate solution by nanofiltration membranes", Desalination, 227(1-3), 204-216. https://doi.org/10.1016/j.desal.2007.06.026
  11. Mulder, M. (1996). Basic principles of membrane technology. Kluwer Academic Publishers, Netherlands.
  12. Ren, X., Springer, T.E. and Zawodzinski, T. (2000), "Water and Methanol Uptakes in Nafion Membranes and Membrane Effects on Direct Methanol Cell Performance, J. Electrochem. Soc., 147(1), 92-98. https://doi.org/10.1149/1.1393161
  13. Sajith, C.J., Mahendran, R. and Mohan, D. (2002), "Studies on cellulose acetate-carboxylated polysulfone blend ultrafiltration membranes--Part I", European Polym. J., 38(12), 2507-2511. https://doi.org/10.1016/S0014-3057(02)00135-0
  14. Thanuttamavong, M.,Yamamoto, K., Oh, I.K., HoChoo, K. and JuneChoi, S. (2002), "Rejection characteristics of organic and inorganic pollutants by ultra low-pressure nanofiltration of surface water for drinking water treatment", Desalination, 145(1-3), 257-264. https://doi.org/10.1016/S0011-9164(02)00420-4
  15. Toshinori, T., Kazuhisa, O., Masakoto, K. and Tomohisa, Y. (2010), "Permeation Characteristics of Electrolytes and Neutral Solutes through Titania Nanofiltration Membranes at High Temperatures", Langmuir., 26(13), 10897-10905. https://doi.org/10.1021/la100791j
  16. Wayne, W., Lau, Y. and Jiang, Y. (1994), "Performance of polysulfone/carboxylated polysulfone Membranes", Polym. Int., 33(4), 413-417. https://doi.org/10.1002/pi.1994.210330412

피인용 문헌

  1. Preparation and characterization of PPEES/chitosan composite nanofiltration membrane vol.315, 2013, https://doi.org/10.1016/j.desal.2012.09.009
  2. Nanostructured polyaniline incorporated ultrafiltration membrane for desalination of brackish water vol.1, pp.6, 2015, https://doi.org/10.1039/C5EW00163C
  3. Comparison study of the effect of blending method on PVDF/PPTA blend membrane structure and performance vol.6, pp.3, 2015, https://doi.org/10.12989/mwt.2015.6.3.205
  4. Elaboration and characterization of low cost ceramics microfiltration membranes applied to the sterilization of plant tissue culture media vol.59, 2016, https://doi.org/10.1016/j.jtice.2015.07.032
  5. Synthesis of new composite polymer membrane from tapioca grains—polysulfone for desalination vol.57, pp.9, 2016, https://doi.org/10.1080/19443994.2014.988652
  6. Development of membrane blend using casting technique for water desalination vol.3, pp.3, 2012, https://doi.org/10.12989/mwt.2012.3.3.201