Geomechanics and Engineering

  • 제4권2호
  • /
  • Pages.91-103
  • /
  • 2012
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effects of excess pore pressure dissipation on liquefaction-induced ground deformation in 1-g shaking table test

  • Wang, B. (Geo-disaster Prevention Laboratory, Department of Civil and Structural Engineering, Kyushu University) ;
  • Zen, K. (Department of Civil and Structural Engineering, Graduate School of Engineering, Kyushu University) ;
  • Chen, G.Q. (Department of Civil and Structural Engineering, Graduate School of Engineering, Kyushu University) ;
  • Kasama, K. (Department of Civil and Structural Engineering, Graduate School of Engineering, Kyushu University)
  • 투고 : 2011.08.24
  • 심사 : 2012.03.24
  • 발행 : 2012.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

Focusing on the effect of excess pore pressure dissipation on liquefaction-induced ground deformation, a series of 1-g shaking table tests were conducted in a rigid soil container by use of saturated Toyoura sand, the relative density of which was 20-60%. These tests were subjected to the sinusoidal base shaking with step increased accelerations: 100, 200, 300 and 400 Gals for 2-4 seconds. Shaking table tests were done using either water or polymer fluid with more viscous than water, thus varying the sand permeability of model tests. Excess pore pressures, accelerations, settlements and lateral deformations were measured in each test. Test results are presented in this paper and the effect of sand permeability on liquefaction and liquefaction-induced ground deformation was discussed in detail.

키워드

참고문헌

  1. De Groot, M.B., Bolton, M.D., Foray, P., Meijers, P., et al. (2006), "Physics of liquefaction phenomena around marine structures", J. Waterw., Port, Coastal, Ocean Eng., 132(4), 227-243. https://doi.org/10.1061/(ASCE)0733-950X(2006)132:4(227)
  2. Dewoolker, M.M., Ko, H.-Y., Stadler, A.T. and Astaneh, S.M.F. (1999), "A substitute pore fluid for seismic centrifuge modeling", Geotech. Testing J., ASTM, 22(3), 196-210. https://doi.org/10.1520/GTJ11111J
  3. Yasuda, S., Nagase, H., Kiku, H. and Uchida, Y. (1992), "The mechanism and a simplified procedure for the analysis of permanent ground displacement due to liquefaction", Solids Found., 32(1), 149-160. https://doi.org/10.3208/sandf1972.32.149
  4. Hamada, M., Yasuda, S. Isoyama, R. and Emoto, K. (1986), "Study on liquefaction induced permanent ground displacements", Association for the development of earthquake prediction.
  5. Hamada, M. and Wakamatsu, K. (1998), "A study on ground displacement caused by soil liquefaction", Collected Papers of Japan Society of Civil Engineers, 3(6), 189-208. (in Japanese)
  6. Lin, M.L. and Wang, K.L. (2006), "Seismic slope behavior in a large-scale shaking table model test", Engineering Geology, 86, 118-133. https://doi.org/10.1016/j.enggeo.2006.02.011
  7. Susumu, I. (1989), "Similitude for shaking table tests on soil-structure-fluid model in 1g gravitational field", Solids Found., 29(1), 105-118. https://doi.org/10.3208/sandf1972.29.105
  8. Iai, S. (1989), "Similitude for shaking table tests on soil-structure-fluid model in 1g gravitational field", Solids Found., 29(1), 105-118. https://doi.org/10.3208/sandf1972.29.105
  9. Ikeno, K., Mitou, M., Zen, K., Sugano, T. and Nakazawa, H. (2011), "Countermeasure against lateral flow of liquefiable runway ground", Journal of Japan Society of Civil Engineers, 67, 130-144. (in Japanese)
  10. Okamura, M., Abdoun, T.H., Dobry, R. and Sharp, M.K. (2001), "Effects of sand permeability and weak aftershocks on earthquake-induced lateral spreading", Solids Found., 41(6), 63-77. https://doi.org/10.3208/sandf.41.6_63
  11. Sasaki, Y., Towhata, I., Tokida, T. and Yamada, K. (1992), "Mechanism of permanent displacement of ground caused by seismic liquefaction", Solids Found., 32(1), 79-96. https://doi.org/10.3208/sandf1972.32.3_79
  12. Shamoto, Y., Zhang, J.-M. and Goto, S. (1997), "Mechanism of large post-liquefaction deformation in saturated sand", Solids Found., 37(2), 71-80. https://doi.org/10.3208/sandf.37.2_71
  13. Tomi, Y. (2010), "Study on the optimum rubble mound dimension under composite type breakwater considering wave-induced liquefaction", Master Thesis Submitted to Kyushu University.
  14. Toyota, H., Towhata, I., Imamura, S. and Kudo, K. (2004), "Shaking table tests on flow dynamic in liquefied slope", Solids Found., 44(5), 67-84. https://doi.org/10.3208/sandf.44.5_67
  15. Towhata, I., Orense, R.P. and Toyota, H. (1999), "Mathematical principles in prediction of lateral ground displacement induced by seismic liquefaction", Solids Found., 39(2), 1-19. https://doi.org/10.3208/sandf.39.2_1
  16. Tohno, I. and Shamoto, Y. (1986), "Liquefaction damage to the ground during the 1983 Nihonkai-Chubu earthquake in Aomori Prefecture", Natural Disaster Science, 8(1), 85-116.
  17. Toboada, V. and Dobry R. (1998), "Centrifuge modeling of earthquake-induced lateral spreading in sand", ASCE J. of Geotech. and Geoenviromental Engrg., 124(12), 1195-1205. https://doi.org/10.1061/(ASCE)1090-0241(1998)124:12(1195)