Journal of Powder Materials (한국분말재료학회지)

The Korean Powder Metallurgy & Materials Institute (한국분말재료학회 (*구 분말야금학회))
권호 표지
DOI QR코드

DOI QR Code

Magnetic Properties and Sintering Behavior of (Nd,Dy)-Fe-B Permanent Magnet by Spark Plasma Sintering

방전 플라즈마 소결을 이용한 (Nd,Dy)-Fe-B 영구자석의 자성 특성 및 소결 거동

  • Song, Sun-Yong (Division of Materials Science and Engineering, Hanyang University) ;
  • Kim, Jin-Woo (Division of Materials Science and Engineering, Hanyang University) ;
  • Kim, Se-Hoon (Division of Materials Science and Engineering, Hanyang University) ;
  • Kim, Young-Do (Division of Materials Science and Engineering, Hanyang University)
  • 송선용 (한양대학교 신소재공학과) ;
  • 김진우 (한양대학교 신소재공학과) ;
  • 김세훈 (한양대학교 신소재공학과) ;
  • 김영도 (한양대학교 신소재공학과)
  • Received : 2012.01.20
  • Accepted : 2012.02.15
  • Published : 2012.04.28
Download PDF
⟨ Previous Next ⟩

Abstract

Magnetic properties and the microstructures of magnets prepared by spark plasma sintering were investigated in order to enhance magnetic properties by grain size control. Nd-Fe-B magnets were fabricated by the spark plasma sintering under 30 MPa at various temperatures. The grain size was effectively controlled by the spark plasma sintering and it was possible to make Nd-Fe-B magnets with grain size of 5.9 ${\mu}m$.

Keywords

References

  1. L. Yang: Proceeding of the 19th International Workshop on HPMA and their Application, (2006) 1.
  2. Z. Li, Y-Q. Heb, C.-H. Li, B.-P. Hub and Z-X. Wang: J. Magn. Magn. Mater., 293 (2005) 754. https://doi.org/10.1016/j.jmmm.2004.11.531
  3. Y. Sun, R. W. Gao, W. C. Feng, G. B. Han, G. Bai and T. Liu: J. Magn. Magn. Mater., 306 (2006) 108. https://doi.org/10.1016/j.jmmm.2006.02.231
  4. B. D. Cullity: Introduction to Magnetic Materials, Addison- Wesley, London, (1972).
  5. B. E. Davies, R. S. Mottram and I. R. Harris: Mater. Chem. Phys., 67 (2001) 272. https://doi.org/10.1016/S0254-0584(00)00450-8
  6. C. H. de Groot, K. H. J. Buschow and F. R. de Boer: J. Appl. Phys., 83 (1998) 388. https://doi.org/10.1063/1.366734
  7. Y. Shinba, T. J. Konno, K. Ishikawa and K. Hiraga: J. Appl. Phys., 97 (2005) 053504. https://doi.org/10.1063/1.1851017
  8. M. Yany, X. Cui, L. Yu and T. Ma: J. Mater. Sci. Technol., 25(5) (2009).
  9. G. Khelifati, J. M. Le Breton, L. Aymard and J. Teillet: J. Magn. Magn. Mater., 218 (2000) 42. https://doi.org/10.1016/S0304-8853(00)00361-9
  10. H. R. Madaah Hosseini and A. Kianvash: J. Magn. Magn. Mater., 281 (2004) 92. https://doi.org/10.1016/j.jmmm.2004.04.093
  11. S. Steyaert, J.-M. Le Breton and I. R. Harris: J. Magn. Magn. Mater., 176 (1997) 297. https://doi.org/10.1016/S0304-8853(97)00211-4
  12. B. C. Wei, G. S. Yu, W. Loser, L. Xia, S. Roth, W. H. Wang and J. Eckert: Mater. Sci. Eng. A, 375 (2004) 1161. https://doi.org/10.1016/j.msea.2003.10.217
  13. J. W. Kim, S. H. Kim and Y. D. Kim: J. Kor. Powd. Met. Inst., 18 (2011) 18 (Korean). https://doi.org/10.4150/KPMI.2011.18.1.018
  14. S. J. Kang: Sintering, Densification, Grain Growth and Microstructure, Elsevier Butterworth-Heinemann, Oxford (2005) 184.
  15. S. H. Kim, H. S. Kim, D. H. Kim and Y. D. Kim: J. Kor. Powd. Met. Inst., 15 (2008) 471 (Korean). https://doi.org/10.4150/KPMI.2008.15.6.471
  16. S. H. Kim, J. W. Kim and Y. D. Kim: J. Kor. Powd. Met. Inst., 17 (2010) 154 (Korean). https://doi.org/10.4150/KPMI.2010.17.2.154
  17. F. D. Saccone and H. Sirkin: Phys. B. Cond. Mater., 354 (2004) 209. https://doi.org/10.1016/j.physb.2004.09.049
  18. W. Mo, L. Zhang, A. Shan, L. Cao, J. Wu and M. Komuro: Intermetallics., 15 (2007) 1483. https://doi.org/10.1016/j.intermet.2007.05.011