Abstract
In this paper, a new land preview system using laser range finder based on heave estimation algorithm is proposed. The proposed land preview system is an equipment which measures the shape of forward topography for autonomous vehicle. To implement this land preview system, the laser range finder is generally used because of its wide measuring range and robustness under various environmental condition. Then the current location of the vehicle has to be known to generate the shape of forward topography and sensors based on acceleration such as IMU and accelerometer are generally utilized to measure heave motion in the conventional land preview system. However the drawback to these sensors is that they are too expensive for low-cost vehicle such as mobile robot and their measurement error is increased for mobile robot with abrupt acceleration. In order to overcome this drawback, an algorithm that estimates heave motion using the information of odometer and previously measured topography is proposed in this paper. The proposed land preview system based on the heave estimation algorithm is verified through simulation and experiments for various terrain using a simulator and a real system.
본 논문에서는 heave 추정 알고리즘 기반의 레이저 거리측정기를 이용한 새로운 선행지형예측시스템을 제안하였다. 본 논문에서 제안하는 선행지형예측시스템은 자율주행 차량이 앞으로 주행할 지면의 형상 정보를 얻기 위한 시스템이다. 이러한 선행지형예측시스템을 구현하기 위하여 측정 범위가 넓고 다양한 환경 조건에서 강인한 레이저 거리 측정기가 일반적으로 이용된다. 이 때 전방 지형을 생성하기 위해 차량의 현재 위치를 알아야 하는데 기존 선행지형예측시스템에서는 heave 움직임을 측정하기 위해 IMU나 가속도계와 같은 가속도 기반 센서들이 주로 이용된다. 하지만 이들 센서는 이동 로봇과 같은 저비용 차량에 사용하기에 고가이며 급 가감속이 발생하는 모바일 로봇에서 측정 오차가 증가하는 문제를 가진다. 이러한 문제를 극복하기 위해 본 논문에서는 주행계와 이전 측정된 지형 정보를 이용한 heave 추정 알고리즘을 제안하였다. 시뮬레이터와 실제 시스템을 이용한 다양한 지형에서 실험을 수행하고 그 결과를 확인해 봄으로써 제안된 heave 추정 알고리즘에 기반한 선행지형예측시스템을 검증하였다.