참고문헌
- H. Adam, "Carbon fibre in automotive applications", Mater. Design, 18, 349 (1997). https://doi.org/10.1016/S0261-3069(97)00076-9
-
S.J. Park and M.K. Seo, "The effects of
$MoSi_{2}$ on the oxidation behavior of carbon/carbon composites", Carbon, 39, 1229 (2001). https://doi.org/10.1016/S0008-6223(00)00248-7 - W.S. Miller, L. Zhuang, J. Bottema, A.J. Wittebrood, P. De Smet, A. Haszler, and A. Vieregge, "Recent development in aluminium alloys for the automotive industry", Mater. Sci. Eng., A280, 37 (2000).
- G.S. Cole and A.M. Sherman, "Light weight materials for automotive applications", Mater. Charact., 35, 3 (1995). https://doi.org/10.1016/1044-5803(95)00063-1
- S.W. Lee and D.G. Lee, "Composite hybrid valve lifter for automotive engines", Compos. Struct., 71, 26 (2005). https://doi.org/10.1016/j.compstruct.2004.09.014
- S.U. Khan, A. Munir, R. Hussain, and J. K. Kim, "Fatigue damage behaviors of carbon fiber-reinforced epoxy composites containing nanoclay", Compos. Sci. Technol., 70, 2077 (2010). https://doi.org/10.1016/j.compscitech.2010.08.004
- R.H. Dauskardt, R.O. Ritchie, and B.N. Cox, "Fatigue of advance materials", Adv. Mater. Process, 7, 26 (1993).
- W. Zhang, R.C. Picu and N. Koratkar, "The effect of carbon nanotube dimensions and dispersion on the fatigue behavior of epoxy nanocomposites", Nanotechnology, 19, 285709 (2008). https://doi.org/10.1088/0957-4484/19/28/285709
- B. Backman, "Composite structures, design, safety and innovation", Elsevier, 2005.
- R.M. Jones, "Mechanics of composite materials", Philadelphia, Tailor Francis, 1999.
- E.R.H. Fuchs, F.R. Field, R. Roth, and R.E. Kirchain, "Strategic materials selection in the automobile body:Economic opportunities for polymer composite design", Compos. Sci. Technol., 68, 1989 (2008). https://doi.org/10.1016/j.compscitech.2008.01.015
- K.S. Kim and S.J. Park, "Technique status of carbon fibers-reinforced composites for aircrafts", Elast. Compos., 46, 118 (2011).
- G. Savage, I. Bomphray, and M. Oxley, "Exploiting the fracture properties of carbon fibre composites to design lightweight energy absorbing structures", Eng. Fail. Anal., 11, 677 (2004). https://doi.org/10.1016/j.engfailanal.2004.01.001
- J. Obradovic, S. Boria, and G. Belingardi, "Lightweight design and crash analysis of composite frontal impact energy absorbing structures", Compos. Struct., 94, 423 (2012). https://doi.org/10.1016/j.compstruct.2011.08.005
- K.S. Kim, Y.S. Shim, B.J. Kim, L.Y. Meng, S.Y. Lee, and S.J. Park, "Present status and applications of carbon fibers-reinforced composites for aircrafts", Carbon Lett., 11, 235 (2010). https://doi.org/10.5714/CL.2010.11.3.235
- Y. Arao, J. Koyanagi, S. Utsunomiya, and H. Kawada, "Effect of ply angle misalignment on out-of-plane deformation of symmetrical cross-ply CFRP laminates: Accuracy of the ply angle alignment", Compos. Struct., 93, 1225 (2011). https://doi.org/10.1016/j.compstruct.2010.10.019
- S.J. Park, "Interfacial forces and fields: Theory and applications", Ed. J.P. Hsu, Marcel Dekker, New York, 1999.
- M. Hussain, A. Nakahira, S. Nishijima, and K. Niihara, "Evaluation of mechanical behavior of CFRC transverse to the fiber direction at room and cryogenic temperature", Composites: Part A, 31, 173 (2000). https://doi.org/10.1016/S1359-835X(99)00060-3
- J.A. Rodosts and N.C. Trivedi, "Handbook of fillers and reinforcement plastics", New York, Van Nostrand Reinhold, 1987.
- J. Verrey, M.D. Wakeman, V. Michaud, and J.A.E. Månson, "Manufacturing cost comparison of thermoplastic and thermoset RTM for an automotive floor pan", Composites: Part A, 37, 22 (2006).
- R. Vipond and C.J. Daniels, "Non-destructive examination of short carbon fibre-reinforced injection moulded thermoplastics", Composites, 16, 14 (1985). https://doi.org/10.1016/0010-4361(85)90652-4
- M.D. Wakeman, T.A. Cain, C.D. Rudd, R. Brooks, and A.C. Long, "Compression moulding of glass and polypropylene composites for optimised macro- and micro-mechanical properties II. Glass-mat-reinforced thermoplastics", Compos. Sci. Technol., 59, 709 (1999). https://doi.org/10.1016/S0266-3538(98)00124-9
- J. Palmer, L. Savage, O.R. Ghita, and K.E. Evans, "Sheet moulding compound (SMC) from carbon fibre recyclate", Composites: Part A, 41, 1232 (2010). https://doi.org/10.1016/j.compositesa.2010.05.005
- H.L.H. Yip, S.J. Pickering, and C.D. Rudd, "Characterisation of carbon fibres recycled from scrap composites using fluidised bed process", Plast. Rubber Compos. Process Appl., 31, 278 (2002). https://doi.org/10.1179/146580102225003047
피인용 문헌
- Numerical Study of the Formability of Fiber Metal Laminates Based on Self-reinforced Polypropylene vol.22, pp.3, 2013, https://doi.org/10.5228/KSTP.2013.22.3.150
- Analytical Study for the Prediction of Mechanical Properties of a Fiber Metal Laminate Considering Residual Stress vol.23, pp.5, 2014, https://doi.org/10.5228/KSTP.2014.23.5.289
- Effect of Thermal History on the Physical Properties of Nylon66 vol.25, pp.1, 2014, https://doi.org/10.14478/ace.2013.1116
- The Development of High Performance Nano-composites with Carbon Nanotube vol.26, pp.2, 2014, https://doi.org/10.5764/TCF.2014.26.2.71
- A Study on Slip Behavior of Fiber Preform by High Speed Resin Flow in High Pressure Resin Transfer Molding vol.27, pp.1, 2014, https://doi.org/10.7234/composres.2014.27.1.031
- Analytical and Experimental Study for Development of Composite Coil Springs vol.38, pp.1, 2014, https://doi.org/10.3795/KSME-A.2014.38.1.031
- Prediction of Spring Rate and Initial Failure Load due to Material Properties of Composite Leaf Spring vol.38, pp.12, 2014, https://doi.org/10.3795/KSME-A.2014.38.12.1345
- Research trends in polymer materials for use in lightweight vehicles vol.16, pp.1, 2015, https://doi.org/10.1007/s12541-015-0029-x
- Evaluation of Laminate Property using Caulplate Application vol.29, pp.5, 2016, https://doi.org/10.7234/composres.2016.29.5.231
- Topologically optimized shape of CFRP front lower control ARM vol.18, pp.4, 2017, https://doi.org/10.1007/s12239-017-0062-0
- Energy absorption characteristics of aluminium/CFRP hybrid beam under impact loading vol.22, pp.2, 2017, https://doi.org/10.1080/13588265.2016.1243637
- Development of CFRP Tubes for the Light-Weight Propeller Shaft of 4WD SUV Vehicles vol.17, pp.4, 2018, https://doi.org/10.14775/ksmpe.2018.17.4.032