Journal of Ceramic Processing Research
- 제13권spc2호
- /
- Pages.428-432
- /
- 2012
- /
- 1229-9162(pISSN)
- /
- 2672-152X(eISSN)
Electrical and thermal properties of polyamideimide-colloid silica nanohybrid for magnetic enameled wire
- Han, S.W. (Nanohybrid & Energy Materials Research Center, Korea Electrotechnology Research Institute) ;
- Kang, D.P. (Nanohybrid & Energy Materials Research Center, Korea Electrotechnology Research Institute)
- 발행 : 2012.11.01
초록
Polyamidimide (PAI)-colloidal silica (CS) nanohybrid films were synthesized by an advanced sol-gel process. The synthesized PAI-CS hybrid films have a uniform and stable chemical bonding and there is no interfacial defects observed by TEM. The thermal degradation ratio of PAI-CS (10 wt%) hybrid films is delayed by 100 ℃ compared with pure PAI sample determined by on set temperature range in TGA. The dielectric constant of PAI-CS (10 wt%) hybrid films decreases with increasing CS content up to about 5 wt% but increases at higher CS content, which is not explained simply by effective medium therories (EMT). The duration time of PAI-CS (10 wt%) hybrid coil is 38 sec, which is very longer than that of pure PAI coil sample. The PAI-CS (10 wt%) hybrid film has a higher breakdown voltage resistance than the pure PAI film at surge environment and exhibits superior heat resistance. The PAI-CS (10 wt%) sample shows the advanced and stable thermal emission properties in transformer module compared with the pure PAI sample. This result illustrates that the advanced thermal conductivity and expansion properties of PAI-CS sample in the case of appropriate sol-gel processes brings the stable thermal emission in transformer system. Therefore, new PAI-CS hybrid samples with such stable thermal emission properties are expected to be used as a high functional coating application in ET, IT and electric power products.