References
- H. Hamaguchi, H. Spikes and A. Cameron, "Elastohydrodynamic Properties of Water in Oil Emulsions," Wear, Vol.43, pp.17-24, 1977. https://doi.org/10.1016/0043-1648(77)90039-4
- T. Dow, "A Rheology Model for Oil-in-water," CASA-SME Technical Paper #Ms77-339, 1977.
- T. Nakahara, T. Makino and K. Kyogoku, "Observations of Liquid Droplet Behavior and Oil Film Formation in O/W Type Emulsion Lubrication," ASME Journal of Tribology, Vol.110, pp.348-353, 1988. https://doi.org/10.1115/1.3261630
- J. Lunberg, "Rheological Model of a Dilute Emulsion," STLE Tribology Transactions, Vol.31, pp.83-90, 1988. https://doi.org/10.1080/10402008808981802
- I. K. Dien and H. G. Elrod, "A Generalized Steady-state Reynolds Equation for Non-newtonian Fluids, with Application to Journal Bearings," J. Lubrication Technology, Vol.105, pp.385-390, 1983. https://doi.org/10.1115/1.3254619
- A. H. Nayfeh, Perturbation Methods, John Wiley & Sons, New York, 1973.
- F. Dai and M. M. Khonsari, "A Theory of Hydrodynamic Lubrication Involving the Mixture of Two Fluids," Int. J. Engng. Sci., Vol.61, pp.634-641, 1994.
- R. S. Paranjpe, "Analysis of Non-newtonian Effects in Dynamically Loaded Finite Journal Bearings Including Mass Conserving Cavitation," ASME Journal of Tribology, Vol.114, pp.736-744, 1992. https://doi.org/10.1115/1.2920943
- S. M. Chun, "Thermohydrodyanmic Lubrication Analysis of Journal Bearing on Steam Turbine Shipping Engine Involving the Mixture of Water within Turbine Oil," Journal of KSTLE, Vol.27, No.2, pp.77-87, 2011.
- C. M. Taylor, "Turbulent Lubrication Theory Applied to Fluid Film Bearing Design," Proc. Inst. Mech. Engrs., Vol.184, Part 3L, pp.40-47, 1969-1970.
- V. N. Constantinescu, "Basic Relationships in Turbulent Lubrication and Their Extension to Include Thermal Effects," Trans. of the ASME, J. of Lubrication Technology, Vol.95, pp.147-154, 1973. https://doi.org/10.1115/1.3451755
- Z. Safar and A. Z. Szeri, "Thermohydrodynamic Lubrication in Laminar and Turbulent Regimes," Trans. of the ASME, J. of Lubrication Technology, Vol.96, pp.48-57, 1974. https://doi.org/10.1115/1.3451908
- S. M. Chun and D. P. Lalas, "Parametric Study of Inlet Oil Temperature and Pressure for a Half-circumferential Grooved Journal Bearing," STLE Tribology Transaction, Vol.35, No.2, pp.213-224, 1992. https://doi.org/10.1080/10402009208982111
- S. M. Chun, "Aeration Effects on the Performance of a Turbocharger Journal Bearing," Tribology International, Vol.41, pp.296-306, 2008. https://doi.org/10.1016/j.triboint.2007.08.006
- S. M. Chun, "A Parametric Study on Bubble Lubrication of High-speed Journal Bearings," Tribology International, Vol.35, No.1, pp.1-13, 2002. https://doi.org/10.1016/S0301-679X(01)00072-X
- J. P. Holman, Heat Transfer, 9th Edn., Appendix A, Table A-9, McGraw-Hill, New York, 2002.
- S. M. Chun, "Study on Mixing Flow Effects in a High-speed Journal Bearing," Tribology International, Vol.34, No.6, pp.397-405, 2001. https://doi.org/10.1016/S0301-679X(01)00030-5