초록
지금까지 하천 및 해류에서의 지반의 수리저항 특성에 대한 연구는 흐름의 방향을 고려하지 않고 주 흐름방향에 대해서만 고려해 왔다. 최근 왕복류 흐름에 의한 지반의 수리저항특성에 대한 연구결과에 의하면 세립질 및 조립질 시료 모두에서 일방향 흐름보다 왕복류를 고려한 양방향 흐름에서 세굴률이 크게 발생 하는 것으로 나타났다. 그러나 해안구조물이 설치되는 해안 또는 협곡에서 흐름의 방향은 반드시 $180^{\circ}$를 이루지 않으므로 흐름의 입사각이 지반의 수리저항성능에 미치는 영향에 대한 검토가 반드시 필요하다. 이에 흐름방향을 고려할 수 있도록 개선된 수리저항성능 실험기를 이용하여 인공적으로 조성된 점성 세립질 및 점성 조립질 시료에 대하여 $0^{\circ}$, $90^{\circ}$, $135^{\circ}$, $180^{\circ}$의 입사각을 갖는 흐름에 대한 일방향 및 양방향 수리저항성능을 평가하였다. 실험결과 세립질 및 조립질 시료 모두에서 입사각이 커짐에 따라 수리저항성능은 감소하고 세굴률이 증가하는 것으로 나타났다. 압밀압력이 낮은 경우에는 세립토의 수리저항성능이 급격히 떨어지나 압밀압력이 큰 경우에는 조립토의 수리저항성능이 세립토에 비해 약간 더 빠르게 감소하는 것으로 나타났다. 최종적으로는 양방향 흐름일 경우 가장 큰 세굴률이 발생하므로 다양한 흐름방향에 노출되는 구조물의 경우는 양방향 흐름에 대해 수리저항성능을 평가하는 것이 타당한 것으로 판단된다.
Until now, study on the hydraulic resistance characteristics of the ground at the river and the ocean current has been focused on the behavior under uni-directional flow without the direction change of flow. However, recent research result shows that scour rate which were measured under the bi-directional flow was much higher than those measured under uni-directional flow for both fine grained and coarse soil. Since the direction of inflow and return flow at the shore, where the structure will be constructed, is not always $180^{\circ}$, effect of the incidence angle on the hydraulic resistance capacity of the ground should be examined. Using the improved EFA which can consider the direction change of flow, hydraulic resistance capacities of the artificially composed clayey fine grained soil and clayey sandy soil under $0^{\circ}$, $90^{\circ}$, $135^{\circ}$, $180^{\circ}$ flow angle of incidence were assessed. Test result shows that hydraulic resistance capacity decreases and scour rate increase with the increase of the incidence angle between inflow and return flow. For the low consolidation pressure condition, hydraulic resistance capacity of the fine grained soil decreases rapidly. While the hydraulic resistance capacity of the coarse grained soil decreases more rapidly than fine grained soil under high consolidation pressure. Eventually since the larger the incidence angle between inflow and return flow, the larger the scour rate. Hydraulic resistance capacity under bi-directional flow($0^{\circ}{\longleftrightarrow}180^{\circ}$) should be examined for the design purpose.