DOI QR코드

DOI QR Code

Aircraft Window Frame Manufacturing Method and Property Study

항공기용 Window Frame 프리폼 제조 방법 및 물성 연구

  • Kim, Hyeong Kab (Department of Textile Engineering, Yeungnam University) ;
  • Kim, Jae Gwan (Department of Textile Engineering, Yeungnam University) ;
  • Lee, Joon Seok (Department of Textile Engineering, Yeungnam University)
  • 김형갑 (영남대학교 공과대학 융합섬유공학과) ;
  • 김재관 (영남대학교 공과대학 융합섬유공학과) ;
  • 이준석 (영남대학교 공과대학 융합섬유공학과)
  • Received : 2012.02.20
  • Accepted : 2012.04.23
  • Published : 2012.06.30

Abstract

An aircraft window frame preform manufacturing method with braided fabric or multi-axial warp knitted fabric was proposed. The tensile, bending, and compressive properties of chopped composites, braided composites, and multi-axial warp knitted composites were compared to confirm the mechanical property of braided or multi-axial composites in order to see if they perform better than that of chopped composites. In cases involving a 60% fiber volume fraction, the mechanical properties of the braided composite were 1.8 or 2 times higher than those of the chopped composite.

Keywords

References

  1. D.-J. Hong, W.-D. Kim, G.-Y. Lee, and J.-S. Kim, "Development of Aircraft Composite Window Frame Using", J Korean Soc Compos Mater, 2004, 17(6), 1-11.
  2. A. Bentur and S. Mindess, "Fiber Reinforced Cementitious Composites", Elsevier Applied Science, New York, 1990.
  3. N. Pan, "Theoretical Determination of the Optimal Fiber Volume Fraction and Fiber-Matrix Property Compatibility of Short Fiber Composites", Polym Compos, 1993, 14(2), 85-93. https://doi.org/10.1002/pc.750140202
  4. H. L. Cox, "The Elasticity and Strength of Paper and Other Fibrous Materials", Br J Appl Phys, 1952, 3, 72-79. https://doi.org/10.1088/0508-3443/3/3/302
  5. G. P. Carman and K. L. Reifsnider, "Micromechanics of Short-fiber Composites", Compos Sci Technol, 1992, 43(2), 137-146. https://doi.org/10.1016/0266-3538(92)90004-M
  6. H. Krenchel, "Fiber Reinforcement", Akademisk Forlag, Copenhagen, 1964.