DOI QR코드

DOI QR Code

Effects of electron donors and acceptors in generating bioelectrical energy using microbial fuel cells

  • Gurung, Anup (Bioenergy Laboratory, Department of Biological Environment, Kangwon National University) ;
  • Oh, Sang-Eun (Bioenergy Laboratory, Department of Biological Environment, Kangwon National University)
  • Received : 2012.02.29
  • Accepted : 2012.03.23
  • Published : 2012.03.31

Abstract

BACKGROUND: In recent years, microbial fuel cells (MFCs) have emerged as a promising technology for recovering renewable energy from waste biomass, especially wastewater. In this study, the possibility of bioelectricity generation in two chambered mediator-less microbial fuel cells (MFCs) was successfully demonstrated using fermentable and non-fermentable substrates. METHODS AND RESULTS: Two different electron acceptors have been tested in the cathode chamber for the effects of reducing agent on the power generation in MFCs. The average voltages of $0.26{\pm}0.014$ V and $0.36{\pm}0.02$ V were achieved with acetate using oxygen and potassium ferricyanide as reducing agent, respectively. Similarly, with glucose the average voltages of $0.256{\pm}0.05$ V and $0.340{\pm}0.04$ V were obtained using oxygen and ferricyanide, respectively. Using potassium ferricyanide as the reducing agent, the power output increases by 39 and 43% with acetate and glucose, respectively, as compared to the dissolved oxygen. Slightly higher coulombic efficiency (CE%) was obtained in acetate as compared to MFCs operated with glucose. The maximum power densities of 124 mW/$m^2$ and 204 mW/$m^2$ were obtained using dissolved oxygen and $K_3Fe(CN)_6$, respectively. CONCLUSION(s): This study demonstrates that power generation from the MFCs can be influenced significantly by the different types of catholyte. Relatively higher CE was obtained with $K_3Fe(CN)_6$. Thus, application of $K_3Fe(CN)_6$ as the catholyte can be vital for scaling uppower generation from the MFCs forreal time applications.

Keywords

References

  1. Basu, D., Basu, S., 2010. A study on direct glucose and fructose alkaline fuel cell. Electrochim. Acta55, 5775-5779. https://doi.org/10.1016/j.electacta.2010.05.016
  2. Chae, K.-J., Choi, M.-J., Lee, J.-W., Kim, K.-Y., Kim, I.S., 2009. Effect of different substrates on the performance, bacterial diversity, and bacterial viability in microbial fuel cells. Bioresour. Technol. 100, 3518-3525. https://doi.org/10.1016/j.biortech.2009.02.065
  3. Gil, G.-C., Chang, I.-S., Kim, B.H., Kim, M., Jang, J.-K., Park, H.S., Kim, H.J., 2003. Operational parameters affecting the performannce of a mediator-less microbial fuel cell. Biosens. Bioelectron. 18, 327-334. https://doi.org/10.1016/S0956-5663(02)00110-0
  4. Jeremiasse, A.W., Hamelers, H.V.M., Buisman, C.J.N., 2010. Microbial electrolysis cell with a microbial biocathode. Bioelectrochem. 78, 39-43. https://doi.org/10.1016/j.bioelechem.2009.05.005
  5. Jung, S., Regan, J., 2007. Comparison of anode bacterial communities and performance in microbial fuel cells with different electron donors. Appl. Microbiol. Biotechnol. 77, 393-402. https://doi.org/10.1007/s00253-007-1162-y
  6. Little, T.M., Hills, F.J., 1978. Agricultural Experimentation: Design and Analysis.John Wiley and Sons, Inc., NY: USA.
  7. Liu, H., Cheng, S., Logan, B.E., 2005. Power Generation in Fed-Batch Microbial Fuel Cells as a Function of Ionic Strength, Temperature, and Reactor Configuration. Environ. Sci. Technol. 39, 5488-5493. https://doi.org/10.1021/es050316c
  8. Liu, Z., Liu, J., Zhang, S., Su, Z., 2009. Study of operational performance and electrical response on mediator-less microbial fuel cells fed with carbon- and protein-rich substrates. Biochem. Eng. J. 45, 185-191. https://doi.org/10.1016/j.bej.2009.03.011
  9. Logan, B.E., Hamelers, B., Rozendal, R., Schroder, U., Keller, J., Freguia, S., Aelterman, P., Verstraete, W., Rabaey, K., 2006. Microbial fuel cells: Methodology and technology. Environ. Sci. Technol. 40, 5181-5192. https://doi.org/10.1021/es0605016
  10. Logan, B.E., Regan, J.M., 2006. Microbial fuel cells - Challenges and applications. Environ. Sci. Technol. 40, 5172-5180. https://doi.org/10.1021/es0627592
  11. Lu, N., Zhou, S., Zhuang, L., Zhang, J., Ni, J., 2009. Electricity generation from starch processing wastewater using microbial fuel cell technology. Biochem. Eng. J. 43, 246-251. https://doi.org/10.1016/j.bej.2008.10.005
  12. Mohan, S.V., Raghavulu, S.V., Shrikanth, S., Sarma, P.N., 2007. Bioelectricity production by mediatorless microbial fuel cell under acidophilic condition using wastewater as substrate: influence of susbtrate loading rate. Curr. Sci. 92, 1720-1726.
  13. Mohan, Y., Manoj Muthu Kumar, S., Das, D., 2008. Electricity generation using microbial fuel cells. Int. J. Hydrogen Energy 33, 423-426. https://doi.org/10.1016/j.ijhydene.2007.07.027
  14. Oh, S.-E., Logan, B., 2006. Proton exchange membrane and electrode surface areas as factors that affect power generation in microbial fuel cells. Appl. Microbiol. Biotechnol. 70, 162-169. https://doi.org/10.1007/s00253-005-0066-y
  15. Oh, S., Logan, B.E., 2005. Hydrogen and electricity production from a food processing wastewater using fermentation and microbial fuel cell technologies. WaterRes.39,4673-4682.
  16. Oh, S.E., Kim, J.R., Joo, J.H., Logan, B.E., 2009. Effects of applied voltages and dissolved oxygen on sustained power generation by microbial fuel cells. Water. Sci. Technol. 60, 1311-1317. https://doi.org/10.2166/wst.2009.444
  17. Oh, S.E., Min, B., Logan, B.E., 2004. Cathode Performance as a Factor in Electricity Generation in Microbial Fuel Cells. Environ. Sci. Technol. 38, 4900-4904. https://doi.org/10.1021/es049422p
  18. Pant, D., Van Bogaert, G., Diels, L., Vanbroekhoven, K., 2010. A review of the substrates used in microbial fuel cells (MFCs) for sustainable energy production. Bioresour. Technol. 101, 1533-1543. https://doi.org/10.1016/j.biortech.2009.10.017
  19. Rabaey, K., Verstraete, W., 2005. Microbial fuel cells: Novel biotechnology for energy generation. Trends Biotechnol. 23, 291-298. https://doi.org/10.1016/j.tibtech.2005.04.008
  20. Selembo, P.A., Merrill, M.D., Logan, B.E., 2009. The use of stainless steel and nickel alloys as low-cost cathodes in microbial electrolysis cells. J. Power Sources 190, 271-278. https://doi.org/10.1016/j.jpowsour.2008.12.144
  21. Tran, H.T., Kim, D.H., Oh, S.J., Rasool, K., Park, D.H., Zhang, R.H., Ahn, D.H., 2009. Nitrifying biocathode enables effective electriicty generation and sustainable wastewater treatment with microbial fuel cell. Water Sci. Technol. 59, 1803-1808. https://doi.org/10.2166/wst.2009.209
  22. Zhang, Y., Min, B., Huang, L., Angelidaki, I., 2011. Electricity generation and microbial community response to substrate changes in microbial fuel cell. Bioresour. Technol. 102, 1166-1173. https://doi.org/10.1016/j.biortech.2010.09.044