References
- Shin, K. B. and Lee, S. J., "The Case and Technique on Lightweight of Railway Vehicle System using Composite Materials," Korea Society for Compos. Mat., Vol. 17, No. 4, pp. 82-86. 2004.
- Jung, D. W., Kim, J. S. and Choi, N. S., "Fatigue Fracture Assessment of Honeycomb Composite Side- Wall Panel Joint for the KTX Tilting Car Body," Trans. of KSME A, Vol. 34, No. 1, pp. 55-60, 2010.
- Lee, J. H. and Rhee, K. Y., "Compressive Behavior of Carbon/Epoxy Composites under High Pressure Environment-Strain Rate Effect," J. of Korean Society for Precision Engineering, Vol. 21, No. 4, pp. 148-153, 2004.
- Han, S. M., Hwang, B. C., Kim, H. Y. and Kim, C., "Analysis of the autofrettage effect in improving the fatigue resistance of automotive CNG storage vessels," Int. J. Precis. Eng. Manuf, Vol. 10, No. 1, pp. 15-21, 2009. https://doi.org/10.1007/s12541-009-0003-6
- Ha, S. R., Rhee, K. Y., Kim, H. J. and Jung, D. H., "An investigation of the strain rate effect on the delamination toughness of fiber-reinforced composites in the hydrostatic pressure condition," Journal of the Korean Society for Precision Engineering, Vol. 22, No. 11, pp. 99-103, 2005.
- Ha, S. R. and Rhee, K. Y., "An experimental study on the fracture toughness of seawater-absorbed thick carbon/epoxy composite in the hydrostatic pressure environment," J. of Korean Society Coastal and Ocean Engineers, Vol. 18, No. 1, pp. 15-20, 2006.
- Gielen, A. W. J., Trouwborst, W. and Loup, D. C., "Experimental failure mode determination of GRP/PVC-foam sandwich T-joints," Proceedings of the Seventh International Conference on Sandwich Structures, pp. 477-486, 2005.
- Li, H. C. H., Herszberb, I., Mouritz, A. P. and Dharmawan, F., "Fracture modeling of composite marine T-Joint," Anziam J., Vol. 47, pp. C682-C694, 2007.
- Kesavan, A., Deivasigamani, M., John, S. and Herszberg, I., "Damage detection in T-joint composite structures," Composite Structures, Vol. 75, No. 1-4, pp. 313-320, 2006. https://doi.org/10.1016/j.compstruct.2006.04.047
- Kim, B. J. and Lee, D. G., "Development of a satellite structure with the sandwich T-joint," Composite Structures, Vol. 92, No. 2, pp. 460-468, 2010. https://doi.org/10.1016/j.compstruct.2009.08.030
- Toftegaard, H. and Lystrup, A., "Design and test of lightweight sandwich T-joint for naval ships," Composites Part A: Applied Science and Manufacturing, Vol. 36, No. 8, pp. 1055-1065, 2005. https://doi.org/10.1016/j.compositesa.2004.10.031
- Dharmawan, F., Li, H. C. H., Herszberg, I. and John, S., "Applicability of the crack tip element analysis for damage prediction of composite T-joints," Composite Structures, Vol. 86, No. 1-3, pp. 61-68, 2008. https://doi.org/10.1016/j.compstruct.2008.03.030
Cited by
- Finite Element Analysis of Large Deformation of Fiber Metal Laminates Under Bending for Stress-Strain Prediction vol.39, pp.10, 2015, https://doi.org/10.3795/KSME-A.2015.39.10.963
- An Experimental Study on the Failure of a Novel Composite Sandwich Structure vol.29, pp.4, 2016, https://doi.org/10.7234/composres.2016.29.4.209