DOI QR코드

DOI QR Code

Characteristic of Thermal Output of Thermally Activated Building System During the Heating Operation According to FDM Analysis

FDM 해석에 의한 구체축열시스템(TABS)의 난방운전시 방열 특성 분석

  • Lim, Jae-Han (Department of Architectural Engineering, Ewha Womans University) ;
  • Song, Jin-Hee (Department of Architectural Engineering, Ewha Womans University) ;
  • Koo, Bo-Kyoung (Department of Architectural Engineering, Ewha Womans University) ;
  • Song, Seung-Yeong (Department of Architectural Engineering, Ewha Womans University) ;
  • Senog, Yoon-Bok (Korea Institute of Construction and Transportation Technology Evaluation and Planning)
  • 임재한 (이화여자대학교 건축공학과) ;
  • 송진희 (이화여자대학교 건축공학과) ;
  • 구보경 (이화여자대학교 건축공학과) ;
  • 송승영 (이화여자대학교 건축공학과) ;
  • 성윤복 (한국건설교통기술평가원)
  • Received : 2011.12.05
  • Accepted : 2011.12.20
  • Published : 2012.03.10

Abstract

This study is focused on the evaluation of thermal output of TABS (Thermally Activated Building System). The aim of this study is to evaluate TABS in terms of the temperature difference between heating medium supply temperature ($T_s$) and return temperature ($T_r$), thermal output and the surface temperature distribution according to the design flow rate and the design flow temperature. Through the transient heat transfer simulation using temperature calculation using Crank-Nicolson FDM using Physibel Voltra 6.0 W, the temperature difference between $T_s$ and ��$T_r$, thermal output and the surface temperature distribution of specific TABS was calculated and evaluated. The results show that specific thermal output and temperature difference at $60^{\circ}C$ of supply water temperature were about 162 $W/m^2$, $13.6^{\circ}C$ respectively.

Keywords

References

  1. Park, S. H., Kim, I. M., Koo, S. Y., Yeo, M. S., and, Kim, K. W., 2010, The effect on the heat output by combination of design factors of thermally activated building system (TABS), Journal of KIAEBS, Vol. 4 No. 3, pp. 180-186.
  2. Park, S. H., Kim, I. M., Koo, S. Y., Yeo, M. S., and, Kim, K. W., 2009, An experimental evaluation on thermal performance of thermally activated building systems (TABS) for residential buildings, KIAEBS Fall Conference, pp. 171-174.
  3. Markus Gwerder, Juurg Totli, Beat Lehmann, Franz Renggli, and Viktor Dorer., 2007, Control of thermally activated building systems, REHVA Wold Congress CLIMA 2007.
  4. Beat Lehmann, Viktor Dorer, and Markus Koschenz., 2007, Application range of thermally activated building systems tabs, Energy and Buildings, Vol. 39, pp. 593-598. https://doi.org/10.1016/j.enbuild.2006.09.009
  5. Gwerder, M., Tödtli, J., Lehmann, B., Dorer, V., Güntensperger, W., and Renggli, F., 2006, Control of thermally activated building systems (TABS) in intermittent operation with pulse width modulation, Applied Energy, Vol. 86, pp. 1606-1616. https://doi.org/10.1016/j.apenergy.2009.01.008