DOI QR코드

DOI QR Code

Pilot Study on the Shear Strengthening Effect of Concrete Members Reinforced by Kagome Truss

카고메 트러스로 보강한 콘크리트 부재의 전단 보강효과에 관한 기초 연구

  • 김우 (전남대학교 토목공학과) ;
  • 강기주 (전남대학교 기계시스템공학부) ;
  • 이기열 (순천제일대학교 토목과)
  • Received : 2011.11.29
  • Accepted : 2012.04.28
  • Published : 2012.07.15

Abstract

There is mounting recognition among concrete researchers that fiber reinforcement makes up for the inherent weakness in resisting tensile force of structural concrete. In practice of application of the fiber to concrete, however, several problems still remain to solve for assuring a uniform mix quality. The Kagome truss that is widely used in mechanical engineering field seems to be a good replacement for the steel fiber. This paper presents the test results of a pilot study for the concrete members reinforced by Kagome truss which is a periodic cellular metal of wire-woven. Three types of Kagome truss bulk were prefabricated and filled with normal concrete to make small-scaled test beams. The beams reinforced by a normal steel stirrups were also tested up to failure to compare the behavioral results. From the results obtained, it is appeared that comparing with beams reinforced by normal stirrups, the beams reinforced by Kagome truss showed better performance in load carrying capacity as well as ductility. Therefore, the Kagome truss is proved to be a good web shear reinforcing material.

콘크리트는 재료적으로 인장에 취약하고 변형에 취성이 크다는 태생적 단점을 갖고 있다. 콘크리트 조직에 인장에 강한 작은 섬유를 혼합한 섬유보강콘크리트는 이러한 취약점을 보완할 수 있는 좋은 방법으로 간주되었으며, 많은 종류의 섬유재료와 방법들이 제안되었다. 그러나 이 섬유보강콘크리트에도 아직까지 해결하지 못한 문제로서 균질한 배합이 힘들고 높은 체적비를 갖는 섬유 혼입의 어려움 등이 있다. 최근에 새로운 개념의 규칙적 다공질 금속(periodic cellular metal)이 개발되어 기계 분야에 많이 적용되고 있는 철선으로 직조된 카고메 트러스가 있다. 이 논문은 기존 강섬유보강콘크리트의 현실적 문제점을 해결하기 위한 방법의 일환으로 카고메 트러스의 적용 가능성을 검토하기 위한 기초 실험 연구 결과를 정리한 것이다. 3종류의 카고메 트러스로 보강된 실험체와 동일한 제원의 수직스터럽으로 보강된 보 실험 결과와 비교하였다. 그 결과, 카고메 트러스 보강 실험체에서는 강도와 연성이 보통 스터럽 보강 보 보다 더 우수한 결과를 나타냈으며, 복부 보강재로서 우수한 기능을 할 수 있는 것으로 판명되었다.

Keywords

References

  1. 김판수, 강기주(2010) 초경량 금속 구조재 직조장치의 설계 및 제작. 대한기계학회 논문집 A권, 대한기계학회, 제34권 제9호, pp. 1235-1240. https://doi.org/10.3795/KSME-A.2010.34.9.1235
  2. 양인환, 조창빈(2010) 강섬유 보강 초고강도 콘크리트 보의 휨강도 예측 기법의 제안. 대한토목학회 논문집, 대한토목학회, 제30권 제3호, pp. 317-328.
  3. 원종필, 박찬기, 김윤정, 박경훈(2007) 고강도 시멘트 복합재료에서 단일 강섬유 및 합성섬유의 부착특성 평가, 대한토목학회 논문집, 대한토목학회, 제27권 제A호, pp. 609-616.
  4. 이용현, 최지은, 전인수, 강기주(2007) 연속된 와이어를 이용한 다층 PCM의 제조 방법 및 특성 평가. 대한기계학회 논문집 A권, 대한기계학회, 제31권 제2호, pp. 245-252.
  5. 이용현, 강기주(2008) 와이어 직조 카고메 다공질 금속을 심재로 갖는 샌드위치 판재의 최적 설계. 대한기계학회 논문집 A권, 대한기계학회, 제32권 제9호, pp. 782-878. https://doi.org/10.3795/KSME-A.2008.32.9.782
  6. ACI Committee 318 (2008) Building Code Requirements for Structural Concrete (ACI 318-08) and Commentary, American Concrete Institute, Farmington Hills, MI, 430pp.
  7. Fib (2010), fib Model Code 2010, First complete draft - Volume 1, Federation internationale du beton, Switzerland, pp. 220-231.