참고문헌
- J. Zhang, Y. C. Xu, P Huang, 2009, Effect of cure cycle on curing process and hardness for epoxy resin, Express Polym. Lett., Vol. 3, No. 9, pp. 534-541. https://doi.org/10.3144/expresspolymlett.2009.67
- S. R. White, H. T. Hahn, 1992, Process modeling of composites materials: Residual stress development during cure, Part I. Model formulation, J. Compos. Mater., Vol. 26, No. 16, pp. 2402-2422. https://doi.org/10.1177/002199839202601604
- P. R. Ciriscioli, Q. Wang, G. S. Springer, 1992, Autoclave curing-Comparisons of model and test results, J. Compos. Mater., Vol. 26, No. 1, pp. 90-102. https://doi.org/10.1177/002199839202600106
- S. R. White, Y. K. Kim, 1996, Staged curing of composite materials, Composites Part A, Vol. 27, No. 3, pp. 219-227. https://doi.org/10.1016/1359-835X(95)00023-U
- L. Liu, B. M. Zhang, D. Fu, 2006, Effects of cure cycles on void content and mechanical properties of composite laminates, Compos. Struct., Vol. 73, No. 3, pp. 303-309. https://doi.org/10.1016/j.compstruct.2005.02.001
- Sh. Teplinsky, E. M. Gutman, 1996, Computer simulation of process induced stress and strain development during cure of thick-section thermosetting composites, Comput. Mater. Sci., Vol. 6, No. 1, pp. 71-76. https://doi.org/10.1016/0927-0256(96)00035-3
- A. C. Loos, G. S. Springer, 1983, Curing of epoxy matrix composites, J. Compos. Mater., Vol. 17, pp.135-169. https://doi.org/10.1177/002199838301700204
- M. R. Kamal, S. Sourour, 1973, Kinetics and thermal characterization of thermoset cure, Polym. Eng. Sci., Vol.13, No.1, pp. 59-64. https://doi.org/10.1002/pen.760130110
피인용 문헌
- An Optimal Cure Process to Minimize Residual Void and Optical Birefringence for a LED Silicone Encapsulant vol.7, pp.6, 2014, https://doi.org/10.3390/ma7064088