Korean Journal of Materials Research (한국재료학회지)

Materials Research Society of Korea (한국재료학회)
권호 표지
DOI QR코드

DOI QR Code

Microstructure and Mechanical Properties of Ti-35Nb-7Zr-XCPP Biomaterials Fabricated by Rapid Sintering

  • Woo, Kee-Do (Dental Schoolvision of Advanced Materials Engineering, Research Center of Advanced Materials Development (RCAMD), Chonbuk National University) ;
  • Park, Sang-Hoon (Dental Schoolvision of Advanced Materials Engineering, Research Center of Advanced Materials Development (RCAMD), Chonbuk National University) ;
  • Kim, Ji-Young (Dental Schoolvision of Advanced Materials Engineering, Research Center of Advanced Materials Development (RCAMD), Chonbuk National University) ;
  • Kim, Sang-Mi (Dental Schoolvision of Advanced Materials Engineering, Research Center of Advanced Materials Development (RCAMD), Chonbuk National University) ;
  • Lee, Min-Ho (Department of Dental Biomaterials, School of Dentistry, Chonbuk National University)
  • Received : 2012.01.19
  • Accepted : 2012.03.01
  • Published : 2012.03.27
Download PDF
⟨ Previous Next ⟩

Abstract

Ti-6Al-4V ELI (Extra Low Interstitial) alloy have been widely used as alternative to bone due to its excellent biocompatibility, although it still has many problems such as high elastic modulus and toxicity. Therefore, biomaterials with low elastic modulus and non toxic characteristics have to be developed. A novel ${\beta}$ Ti-35wt%Nb-7wt%Zr-Calcium pyrophosphate (CPP) composite that is a biocompatible alloy without elemental Al or V was fabricated by spark plasma sintering (SPS) at $1000^{\circ}C$ under 70 MPa using high energy mechanical milled (HEMM) powder. The microstructure and phases of the milled powders and the sintered specimens were studied using SEM, TEM, and XRD. Ti-35wt%Nb-7wt%Zr alloy was transformed from ${\alpha}$ phase to ${\beta}$ phase in the 4h-milled powder by sintering. The sintered specimen using the 4h-milled powder showed that all the elements were distributed very homogeneously and had higher density and hardness. ${\beta}$ Ti alloy-CPP composite, which has nanometer particles, was fabricated by SPS using HEMMed powder. During the sintering process, $CaTiO_3$, TixOy, and CaO were formed because of the reaction between Ti and CPP. The Vickers hardness of the composites increases with the increase of the milling time and the addition of CPP. The biocompatibility of the Ti-Nb-Zr alloys was improved by addition of CPP.

Keywords

References

  1. M. Long and H. J. Rack, Biomaterials, 19, 1621 (1998). https://doi.org/10.1016/S0142-9612(97)00146-4
  2. H. S. Kim, W. Y. Kim and S. H. Lim, Scripta Mater., 54, 887 (2006). https://doi.org/10.1016/j.scriptamat.2005.11.001
  3. E. Takahashi, T. Sakurai, S. Watanabe, N. Masahashi and S. Hanada, Mater. Trans., 43, 2978, (2002). https://doi.org/10.2320/matertrans.43.2978
  4. L. M. Elias, S. G. Schneider, S. Schneider, H. M. Silva and F. Malvisi, Mater. Sci. Eng., A432, 108 (2006).
  5. H. S. Kim, S. H. Lim, I. D. Yeo and W. Y. Kim, Mater. Sci. Eng., A449-451, 322 (2007).
  6. S. Ishiyama. S. Hanada and O. Izumi, ISIJ International, 31, 807 (1991). https://doi.org/10.2355/isijinternational.31.807
  7. P. Laheurte, A. Eberhardt and M. J. Philippe, Mater. Sci. Eng., A396, 223 (2005).
  8. S. Nag, R. Banerjee and H. L. Fraser, Acta Biomaterialia, 3, 369 (2007). https://doi.org/10.1016/j.actbio.2006.08.005
  9. Y. L. Hao, S. J. Li, S. Y. Sun and R. Yang, Mater. Sci. Eng., A441, 112 (2006).
  10. H. C. Kim, I. J. Shon, J. K. Yoon and J. M. Doh, Int. J. Refrac. Met. Hard Mater., 25, 46 (2007). https://doi.org/10.1016/j.ijrmhm.2005.11.004
  11. K. D. Woo, D. S. Kang, S. H. Kim, S. H. Park, J. Y. Kim and H. R. Ko, J. Kor. Powd. Metal. Inst., 18, 188 (2011) (in Korean). https://doi.org/10.4150/KPMI.2011.18.2.188

Cited by

  1. Characterizations on Mechanical Properties and In Vitro Bioactivity of Biomedical Ti–Nb–Zr–CPP Composites Fabricated by Spark Plasma Sintering vol.29, pp.11, 2016, https://doi.org/10.1007/s40195-016-0486-y