한국재료학회지 (Korean Journal of Materials Research)

  • 제22권3호
  • /
  • Pages.123-129
  • /
  • 2012
  • /
  • 1225-0562(pISSN)
  • /
  • 2287-7258(eISSN)
한국재료학회 (Materials Research Society of Korea)
권호 표지
DOI QR코드

DOI QR Code

겹치기 마찰교반접합된 Inconel 600/SS 400 합금의 미세조직과 기계적 특성 평가

Evaluation of Microstructure and Mechanical Properties of Friction Stir Lap Jointed Inconel 600/SS 400

  • 송국현 (한국생산기술연구원 융합신공정 연구그룹) ;
  • 투고 : 2011.12.26
  • 심사 : 2012.02.14
  • 발행 : 2012.03.27
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The microstructures and mechanical properties of friction stir welded lap joints of Inconel 600 and SS 400 were evaluated; friction stir welding was carried out at a tool rotation speed of 200 rpm and welding speed of 100 mm/min. Electron back-scattering diffraction and transmission electron microscopy were introduced to analyze the grain boundary characteristics and the precipitates, respectively. Application of friction stir welding was notably effective at reducing the grain size of the stir zone. As a result, the reduced average grain size of Inconel 600 ranged from $20{\mu}m$ in the base material to $8.5{\mu}m$ in the stir zone. The joint interface between Inconel 600 and SS 400 showed a sound weld without voids and cracks, and MC carbides with a size of around 50 nm were partially formed at the Inconel 600 area of lap joint interface. However, the intermetallic compounds that lead to mechanical property degradation of the welds were not formed at the joint interface. Also, a hook, along the Inconel 600 alloy from SS 400, was formed at the advancing side, which directly brought about an increase in the peel strength. In this study, we systematically discussed the evolution of microstructures and mechanical properties of the friction stir lap joint between Inconel 600 and SS 400.

키워드

참고문헌

  1. R. S. Mishra and Z. Y. Ma, Mater. Sci. Eng. R Rep., 50, 1 (2005). https://doi.org/10.1016/j.mser.2005.07.001
  2. R. S. Mishra and M. W. Mahoney, Friction Stir Welding and Processing, p. 1-6, ASM Int., Materials Park, Ohio (2007).
  3. O. A. Ojo, N. L. Richards and M. C. Chaturvedi, Scripta Mater., 50, 641 (2004). https://doi.org/10.1016/j.scriptamat.2003.11.025
  4. C. A. Huang, T. H. Wang, W. C. Han and C. H. Lee, Mater. Chem. Phys., 104, 293 (2007). https://doi.org/10.1016/j.matchemphys.2007.03.017
  5. J. D. Kim, C. J. Kim and C. M. Chung, J. Mater. Process. Tech., 114, 51 (2001). https://doi.org/10.1016/S0924-0136(01)00566-0
  6. K. H. Song and K. Nakata, Kor. J. Mater. Res., 21, 410 (2011) (in Korean). https://doi.org/10.3740/MRSK.2011.21.7.410
  7. K. H. Song, T. Tsumura and K. Nakata, Mater. Trans., 50, 1832 (2009). https://doi.org/10.2320/matertrans.M2009058
  8. K. H. Song and K. Nakata, Mater. Trans., 50, 2498 (2009). https://doi.org/10.2320/matertrans.M2009200
  9. K. H. Song and K. Nakata, Mater. Des., 31, 2942 (2010). https://doi.org/10.1016/j.matdes.2009.12.020
  10. K. H. Song and K. Nakata, J. Alloy. Comp., 505, 144 (2010). https://doi.org/10.1016/j.jallcom.2010.06.016
  11. Y. C. Chen and K. Nakata, Scripta Mater., 58, 433 (2008). https://doi.org/10.1016/j.scriptamat.2007.10.033
  12. Y. C. Chen, T. Komazaki, Y. G. Kim, T. Tsumura and K. Nakata, Mater. Chem. Phys., 111, 375 (2008). https://doi.org/10.1016/j.matchemphys.2008.04.038
  13. A. Abdollah-Zadeh, T. Saeid and B. Sazgari, J. Alloy. Comp., 460, 535 (2008). https://doi.org/10.1016/j.jallcom.2007.06.009
  14. P. Lin, G. Palumbo, U. Erb, K.T. Aust, Scripta Metall. Mater., 33, 1387 (1995). https://doi.org/10.1016/0956-716X(95)00420-Z
  15. F. J. Humphreys and M. Hatherly, Recrystallization and Related Annealing Phenomena, 1st ed., p. 21-24, Elsevier Ltd., Oxford, UK (1996).
  16. 16. R. E. Reed-Hill and R. Abbaschian, Physical Metallurgy Principles, 3rd ed., p. 247-249, PWS, Boston, USA (1991).
  17. Y. C. Chen and K. Nakata, Mater. Des., 30, 3913 (2009). https://doi.org/10.1016/j.matdes.2009.03.007