DOI QR코드

DOI QR Code

A Simulation of the Tubular Packed Bed Reactor for the Steam-CO2 Reforming of Natural Gas

천연가스의 수증기-이산화탄소 복합개질을 위한 충진층 관형반응기의 전산모사

  • Lee, Deuk-Ki (Dept. of Fire Safety, Gwangju University) ;
  • Koo, Kee-Young (Hydrogen and Fuel Cell Department, Korea Institute of Energy Research) ;
  • Seo, Dong-Joo (Hydrogen and Fuel Cell Department, Korea Institute of Energy Research) ;
  • Yoon, Wang-Lai (Hydrogen and Fuel Cell Department, Korea Institute of Energy Research)
  • 이득기 (광주대학교 소방행정학과) ;
  • 구기영 (한국에너지기술연구원 수소연료전지연구단) ;
  • 서동주 (한국에너지기술연구원 수소연료전지연구단) ;
  • 윤왕래 (한국에너지기술연구원 수소연료전지연구단)
  • Received : 2011.12.22
  • Accepted : 2012.02.20
  • Published : 2012.02.28

Abstract

A 2-dimensional heterogeneous reactor model was developed and simulated for a tube reactor of packed bed where the steam-$CO_2$ combined reforming reaction of natural gas proceeded to produce synthesis gas. Under the reactor feeding rate, 45 $Nm^3$/h, of the reactant gas stream, the 2-dimensional heterogeneous reactor model showed the similar results to those from the ASPEN simulator although there were some discrepancies between the two in the temperature and the $H_2$/CO ratio of the reformed gas at the reactor exit. The calculated enthalpy difference between the reformed gas at the reactor exit and the reactant gas fed to the reactor was closely correspondent to the total amount of heat transferred to the reactor interior from the furnace. This supports that the 2-dimensional heterogeneous reactor model was reasonably established and the numerical solution was properly obtained.

Keywords

References

  1. J. A. Velasco, L. Lopez, M. Velasquez, M. Boutonnet, S. Cabrera, and S. Jaras : "Gas to liquids: A technology for natural gas industrialization in Bolivia", J. Natural Gas Sci. Eng., Vol. 2, No. 5, 2010, p. 222. https://doi.org/10.1016/j.jngse.2010.10.001
  2. F. Yagi, R. Kanai, S. Wakamatsu, R. Kajiyama, Y. Suehiro, and M. Shimura : "Development of synthesis gas production catalyst and process", Catal. Today, Vol. 104, 2005, p. 2. https://doi.org/10.1016/j.cattod.2005.03.061
  3. 조원일, 이승호, 모용기, 신동근, 백영순 : "합성가스 제조를 위한 $CO_2$/수증기에 의한 메탄 개질반응 연구", 한국 수소 및 신에너지학회 논문집, Vol. 15, No. 4, 2004, pp. 301-308.
  4. J. Xu, and G. F. Froment : "Methane steam reforming, methanation and water-gas shift: I. Intrinsic kinetics", AIChE J., Vol. 35, 1989, p. 88. https://doi.org/10.1002/aic.690350109
  5. A. M. De Groote, and G. F. Froment : "Reactor modelling and simulations in synthesis gas production", Rev. Chem. Eng., Vol. 11, No. 2, 1995, p. 145. https://doi.org/10.1515/REVCE.1995.11.2.145
  6. G. G. Kuvshinov, Y. I. Moginykh, and D. G. Kuvshinov : "Kinetics of carbon formation from $CH_4-H_2$ mixtures over a nickel containing catalyst", Catal. Today, Vol. 42, 1998, p. 357. https://doi.org/10.1016/S0920-5861(98)00115-1
  7. G. F. Froment, and P. K. Hofmann : "Design of fixed-bed gas-solid catalytic reactor", In: "Chemical Reaction and Reactor Engineering", J. J. Carberry, and A. Varma (Editors), Marcel Dekker, N.Y., 1987.
  8. P. E. Peters, R. S. Schiffino, and P. Harriott : "Heat transfer in packed tube reactors", Ind. Eng. Chem. Res., Vol. 27, 1988, p. 226. https://doi.org/10.1021/ie00074a003
  9. S. Ergun : "Fluid flow through packed columns", Chem. Eng. Progr., Vol. 48, 1952, p. 89.
  10. J. K. Rajesh, S. K. Gupta, G. P. Rangaiah, and A. K. Ray : "Muntiobjective optimization of steam reformer performance using genetic algorithm", Ind. Eng. Chem. Res., Vol. 39, 2000, p. 706 https://doi.org/10.1021/ie9905409

Cited by

  1. Simulation for Possible Coke-Free Operation of a Packed Catalyst Bed Reactor in the Steam-CO2 Reforming of Natural Gas vol.26, pp.5, 2015, https://doi.org/10.7316/KHNES.2015.26.5.445