DOI QR코드

DOI QR Code

2심 냉간성형 각형 CFT기둥-보 접합부의 구조거동

Structural Behavior of Two-Seam Cold Formed Square CFT Column to Beam Connections

  • 오헌근 (서울시립대학교 건축공학과) ;
  • 김선희 (서울시립대학교 건축공학과) ;
  • 박찬면 (삼성물산 주식회사 건설부문 토건ENG) ;
  • 최성모 (서울시립대학교 건축학부)
  • 투고 : 2012.09.14
  • 심사 : 2012.11.30
  • 발행 : 2012.12.15

초록

The concrete-filled tube (CFT) column has the excellent structural performance. But it is difficult to connect with column and beam because of closed section. Its Solution, 2 members of ㄷchennel in which Internal diaphragm is installed were welded beforehand and the method of making Rectangular Steel Tube was proposed. According to upside and downside junction shape, Internal diaphragm suggested as symmetric specimen and asymmetric specimen. The upper and lower diaphragm of the Symmetric specimen used the same horizontal and The upper diaphragm of the Asymmetric specimen used the horizontal plate and the lower diaphragm used the vertically plate. In this research, 4 T-shape column to beam steps connections were tested with cyclic loading experiment in order to evaluate the structural capability of the offered connection. Symmetric specimens be a failure in 0.03rad from beam flange. And Asymmetric specimens be a failure in 0.05rad from column interface. The comparison results of All specimens shown similar to energy absorption capacity in 0.02rad.

키워드

참고문헌

  1. Standard Details for Connection (Architecture Steel Structural) (2012), Korea Society of Steel construction
  2. Park, C.M., (2007) Development of an Internal Diaphragm for Cold-Formed Square CFT Column to Beam Connections, M.S. dissertation, University of Seoul, Korea
  3. Lee, S.H., Jung, H.M., Yang, I.S., Choi, S.M. (2009) An Experimental Study on Simple Tension Connections for Square CFT Column to Beam Using Internal Plate with Holes, Journal of Korean Society of Steel Construction, KSSC, Vol. 21, No. 6, pp. 575-583 (in Korean).
  4. Lee, S.J. (2006) Deformation Capacity of Endplate-type Beam-to-Column Connection with New Type Mechanical Fasteners, Journal of the Korean Association for Spatial Structures, Vol. 6, No. 3, pp. 123-130 (in Korean).
  5. Jeon, J.M., Lee, J.H. (2006) Analysis of Cold-Formed Steel Beams Considering Local Buckling and Lateral Buckling, Journal of the Korean Association for Spatial Structures, Vol. 6, No. 3, pp. 77-86 (in Korean).
  6. Choi, S.M., Yun, Y.S., Kim, Y.S., Kim, J.H. (2003) A Study on Seismic Performance for CFT Square Column-to-Beam Connections Reinforced with Asymmetric Lower Diaphragms, Journal of Korean Society of Steel Construction, KSSC, Vol. 15, No. 5, pp. 579-589 (in Korean).
  7. Choi, S.M., Yun, Y.S., Kim, Y.S., Kim, J.H. (2004) An Experimental Study on Seismic Performance of Concrete Filled tubular Square Column-to-Beam Connections with Combined Cross Diaphragm, Journal of the Architectural Institute of Korea, AIK, Vol. 20, No. 1, pp. 33-40
  8. KS B 0802, (2003) METHOD OF TENSILE TEST FOR METALLIC MATERIALS, Korea Agency for Technology and Standards
  9. KS B 0801, (2007) TEST PIECES FOR TENSILE TEST FOR METALLIC MATERIALS, Korea Agency for Technology and Standards
  10. AISC(2005), Seismic provisions for structural steel buildings, American Institute of Steel Construction Ins.
  11. S.M. Choi, Y.Y.Sang, D.K, Kim, Y.S, Kim, J.H, Kim, Experimental study on seismic performance of concrete filled tubular square column-to-beam connections with combined cross diaphragm, steel & composite structure, 2006.10