References
- Kim, C. J., Kang, Y. J. and Lee, B. H., 2011, Sensitivity Analysis for Reducing Critical Responses at Axle Shaft of Light-weighted Vehicle, International Journal of Automotive Technology, Accepted.
- Kim, C. J., Bae, C. Y. and Lee, B. H., 2006, Verification on Damage Calculating Method of Vibration Fatigue Using Uni-axial Vibration Test, Transactions of Korean Society Noise and Vibration Engineering, Vol. 16, No. 5, pp. 521-528. https://doi.org/10.5050/KSNVN.2006.16.5.521
- Kim, C. J., Kang, Y. J. and Lee, B. H., 2012, Generation of Driving Profile on a Multi-axial Vibration Table for Vibration Fatigue Testing, Mechanical Systems and Signal Processing, 26, pp. 244-253. https://doi.org/10.1016/j.ymssp.2011.07.018
- Bayissa, W. L. and Haritos, N., 2007, Structural Damage Identification in Plates Using Spectral Strain Energy Analysis, Journal of Sound and Vibration, Vol. 307, pp. 226-249. https://doi.org/10.1016/j.jsv.2007.06.062
- Xu, Z. D. and Wu, Z., 2007, Energy Damage Detection Strategy based on Acceleration Responses for Long-span Bridge Structures, Engineering Structures, 29, pp. 609-617. https://doi.org/10.1016/j.engstruct.2006.06.004
- Parloo, E., Vanlanduit, S. and Verboven, P., 2004, Incresaed Reliability of Reference-based Damage Identification Techniques by Using Output-only Data, Journal of Sound and Vibration, Vol. 270, pp. 813-832. https://doi.org/10.1016/S0022-460X(03)00494-2
- Kim, C. J., Kang, Y. J. and Lee, B. H., 2011, Experimental Spectral Damage Prediction of a Linear Elastic System Using Acceleration Response, Mechanical Systems and Signal Processing, Vol. 25, pp. 2538-2548. https://doi.org/10.1016/j.ymssp.2011.03.008
- Kim, C. J., 2011, Analysis of Vibration Fatigue of Linear Elastic Systems Using Measured Acceleration Responses, Doctoral Dissertation, Seoul National University.
Cited by
- Damage Count Method Using Acceleration Response for Vibration Test Over Multi-spectral Loading Pattern vol.25, pp.11, 2015, https://doi.org/10.5050/KSNVE.2015.25.11.739
- Dynamic Analysis of Carbon-fiber-reinforced Plastic for Different Multi-layered Fabric Structure vol.26, pp.4, 2016, https://doi.org/10.5050/KSNVE.2016.26.4.375