대한인간공학회지 (Journal of the Ergonomics Society of Korea)

  • 제31권1호
  • /
  • Pages.165-170
  • /
  • 2012
  • /
  • 1229-1684(pISSN)
  • /
  • 2093-8462(eISSN)
대한인간공학회 (Ergonomics Society of Korea)
권호 표지
DOI QR코드

DOI QR Code

Development of a New Method for Whole-Body Working Postures: K-OWAS

  • Kim, Yu-Chang (Department of Industrial Management Engineering, Dong-Eui University) ;
  • Kim, Dae-Su (Department of Industrial Management Engineering, Dong-Eui University)
  • 투고 : 2012.01.06
  • 심사 : 2012.01.18
  • 발행 : 2012.02.29
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Objective: The aim of this study is to develop new K-OWAS on the basis of the anthropometry of Koreans considering works in shipbuilding and heavy industry for evaluation whole-body working postures. Background: Work Related Musculoskeletal Disorders(WMSDs) were a leading cause of sick leaves and injuries in the industries of our country. Especially, awkward working postures and handling of heavy weight are known as a main cause of WMSDs. OWAS, RULA and REBA are much used as the method for evaluating the awkward working postures. OWAS is the working postures evaluation method that can be used for the evaluation of whole-body working postures. OWAS was the method made based on the anthropometry of the foreigner, working postures and weight does not fit our work state. Method: This method was evaluated considering the anthropometry of the Koreans, working postures and weight in shipbuilding and heavy industry work state in Korea. Results: Correlation of action level of OWAS and subjective discomfort for each body parts were not statistically significant($p{\geq}0.1$). But correlation of action level of K-OWAS and subjective discomfort for torso and waist were statistically significant($p{\leq}0.1$). Conclusion: K-OWAS was suitable in the evaluation of upper body including torso and waist. Application: New method for whole-body working postures from this study prevent WMSDs and help improvement of working environment and design of working method.

키워드

참고문헌

  1. Borg, G., "Psychophysical scaling with applications in physical work and the perception of exertion", Scandinavian Journal of Work, Environment & Health, 16(1), 55-58, 1990. https://doi.org/10.5271/sjweh.1815
  2. Genaidy, A. M., Al-shedi, A. A. and Karwowski, W., "Postural stress analysis in industry", Applied Ergonomics, 25(2), 77-87, 1994. https://doi.org/10.1016/0003-6870(94)90068-X
  3. Grandjean, E. and Hunting, W., "Ergonomics of postures-review of various problems of standing and sitting postures", Applied Ergonomics, 8(3), 135-140, 1977. https://doi.org/10.1016/0003-6870(77)90002-3
  4. Karhu, O., Kansi, P. and Kuorinka, I., "Correcting working postures in industry: a practical method for analysis", Applied Ergonomics, 8(4), 199-201, 1977. https://doi.org/10.1016/0003-6870(77)90164-8
  5. KATS, Report of the Korean Anthropometric Survey for 3D Body Scan Measurement(Size Korea), 2010.
  6. Kee, D. H. and Park, K. H., "Comparison of Posture Classification Schemes of OWAS, RULA and REBA", Journal of the Korean Society of Safety, 20(2), 127-132, 2005.
  7. Kee, D. H., "A Postural Classification Scheme of Upper Body for Females for Quantifying Postural Load of Working Postures", Journal of the Korean Institute of Industrial Engineers, 28(2), 223-231, 2002.
  8. Kim, Y. C., "A Survey on Ergonomic Evaluation Methods of Agricultural Work for Preventing WMSDs", Journal of the Korean Society of Safety, 2011.
  9. Kim, Y. C. and Jung, H. W., "Application of America Ergonomics Program in Korea", Proceeding of the 2000 Fall Conference of the Korean Society of Safety, 2000.
  10. Kim, Y. C. and Jang, E. J., "A Study on Evaluation of the Lower Extremity Supporter using the Borg's scale", Proceeding of the 2008 Spring Conference of Ergonomics Society of Korea, 2008.
  11. Marras, W. S., "Occupational low back disorder causation and control", Ergonomics, 43, 880-902, 2000. https://doi.org/10.1080/001401300409080
  12. McGill, S. M., "The biomechanical of low back injury-implications on current practice in industry and clinic", Journal of Biomechanics, 30(5), 465-475, 1997. https://doi.org/10.1016/S0021-9290(96)00172-8
  13. Moon, C. Y., Na, S. H., Kee, D. H. and Chung, M. K., "Comparison of Observational Posture Evaluation Methods based on Maximum Holding Times", Journal of the Korean Institute of Industrial Engineers, 31(4), 289-296, 2005.
  14. Scott, G. B. and Lambe, N. R., "Working practices in a perchery system, using the OVAKO Working posture Analysing System(OWAS)", Applied Ergonomics, 27(4), 281-284, 1996. https://doi.org/10.1016/0003-6870(96)00009-9
  15. Waters. T. R., Putz-Anderson, V., Garg, A. and Fine, L. J., "Revised NIOSH equation for the design and evaluation of manual lifting tasks", Ergonomics, 36(7), 749-776, 1993. https://doi.org/10.1080/00140139308967940

피인용 문헌

  1. Estimation Model of Energy Expenditure of Working in a Clean Room for Manufacturing Embedded Needles by Ergonomic Programs vol.21, pp.1, 2016, https://doi.org/10.7315/CADCAM.2016.069
  2. A Study on Functional Movement Screen and Automobile Worker's Musculoskeletal Disorders vol.35, pp.3, 2016, https://doi.org/10.5143/JESK.2016.35.3.125