Abstract
The result of the line simplification algorithm varies with the choice of algorithms, the change in tolerance and the selection of target objects. Three of the algorithms used in this study are Sleeve-fitting, Visvalingam-Whyatt, and Bend-simplify. They were applied to the three kinds of objects which were buildings, rivers, and roads with the five degrees of the tolerance. Through this experiments the vector displacement, the areal displacement, and the angular displacement were measured and the qualitative analysis was performed with the trend line of the errors. The experimental results show that errors were differ from tolerance values, and characteristics of line simplification algorithms based on changes of tolerance were understood.
선형 단순화 알고리듬의 결과물은 단순화 알고리듬의 선택, 임계값의 선택, 대상 객체의 선택 등에 의해 달라진다. 본 연구에서는 Sleeve-fitting, Visvalingam-Whyatt, Bend-simplify 알고리듬의 임계값을 5단계로 조절하여 건물, 하천, 도로 객체에 적용하고, 단순화 결과물에 대해 거리오차, 면적오차, 각오차를 측정하였다. 그리고 오차값들의 추세선을 통해 정성적인 분석을 실시하였다. 실험 결과 선형 단순화 알고리듬에서 임계값의 조절에 따른 오차값의 변화를 알 수 있었고, 선형 단순화 알고리듬들의 임계값의 변화에 따른 특징을 파악할 수 있었다.