참고문헌
- Yao, D., Chen, S. C., and Kim, B., 2008, "Rapid Thermal Cycling of Injection Molds: An Overview on Technical Approaches and Applications," Adv. Polym. Technol., Vol. 27, No. 4, pp. 233-255. https://doi.org/10.1002/adv.20136
- Park, K., Sohn, D. H., and Cho, K. H., 2010, "Eliminating Weldlines of an Injection Molded Part with the Aid of High-frequency Induction Heating," J. Mech. Sci. Tech., Vol. 24, No. 1, pp. 149-1520. https://doi.org/10.1007/s12206-009-1127-4
- Chiang, H. H., Hieber, C. A., and Wang, K. K., 1991, "A Unified Simulation of the Filling and Postfilling Stages in Injection Molding, Part I: Formulation," Polym. Engng. Sci., Vol. 31, No. 2, pp. 116-124. https://doi.org/10.1002/pen.760310210
- Kwon, T. H., 1989, "Mold Cooling System Design using Boundary Element Method," Trans. ASME J. Engng. Indust., Vol. 110, No. 4, pp. 348-394.
- Lin, Y. W., Li, H. M., Chen, S. C., and Shen, C. Y., 2005, "3D Numerical Simulation of Transient Temperature Field for Lens Mold Embedded with Heaters," Int. Comm. Heat Mass Transf., Vol. 32, No. 9, pp. 1221-1230. https://doi.org/10.1016/j.icheatmasstransfer.2004.10.025
- Cooper, M. G., Mikic, B. B., and Yovanovich, M. M., 1969, "Thermal Contact Conductance," Int. J. Heat Mass Transf., Vol. 12, No. 3, pp. 279-300. https://doi.org/10.1016/0017-9310(69)90011-8
- Kim, K. M., Lee, K. Y., Sohn, D. H., and Park, K., 2011, "Investigation into Heat Transfer Characteristics of an Injection Mold by Considering Thermal Contact Resistance," Trans. Mater. Process., Vol. 20, No. 1, pp. 29-35. https://doi.org/10.5228/KSTP.2011.20.1.29
- Sohn, D. H., Kim, K. M., and Park, K., 2011, "Thermal-fluid Coupled Analysis for the Injection Molding Process by Considering the Thermal Contact Resistance," Trans. of the KSME (A), Vol. 35, No. 12, pp. 1627-1633. https://doi.org/10.3795/KSME-A.2011.35.12.1627
- Holman, J. P., 1997, Heat Transfer, McGraw-Hill, New York, USA.
- Shlykov, Y. P., and Ganin, E. A., 1960, "Thermal Contact Resistance," Trans. Atom. Energ.. Vol. 9, No. 6, pp. 496-498.
- Rhee, B. O., Choi, J. H., and Tae, J. S., 2009, "Reduction of Design Variables for Automated Optimization of Injection Molding Cooling Circuits," Trans. KSMTE, Vol. 18, No. 4, pp. 417-422.