Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집)

Korean Tunnelling and Underground Space Association (한국터널지하공간학회)
권호 표지
DOI QR코드

DOI QR Code

A study on damage mechanism of transition section in cut and cover tunnel using 3 dimensional numerical analysis

3차원 수치해석을 통한 개착터널내 단면변화구간의 손상미케니즘 연구

  • Received : 2012.11.06
  • Accepted : 2012.11.23
  • Published : 2012.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

This study made progress about Demage Mechanism of Transition Section in Cut and Cover Tunnel. For this study, Inspection and test was carried out about Transition Section. After this process, Numerical Analysis was accomplished by 2D, 3D. A result of inspection and test, It couldn't find the reason why the upper slab Demage was detected. So 2D Numerical Analysis was conducted. It was analyzed that the Safety Factor(1.0) was satisfied in 2D. But, the result of 3D Numerical Analysis, The reason was found that the Demage on upper slab was caused by moment change. The Moment was changed by column interval transition. For Retrofitting, Column was added under slab in tunnel. It was found that the addition column decreased upper slab deformation. After this study, It could be find that are important 3D Numerical Analysis as well as 2D Numerical Analysis in case of Transition Section. This Study can help developing construction and maintenance about Tunnel. Finally, It's going to study Retrofitting plans which have minimum influence of Transition Section in Cut and Cover Tunnel.

본 연구는 터널의 단면변화구간에서 발생한 손상 미케니즘에 대하여 이루어졌다. 이를 위해 단면변화 구간을 대상으로 다양한 현장조사 및 시험을 실시하였으며, 이를 바탕으로 2차원 및 3차원 수치해석을 수행하였다. 현장조사 및 시험 결과, 슬래브 손상에 대한 직접적인 원인을 찾을 수 없었으며, 2차원 수치해석을 수행한 결과 기준 안전율(1.0)을 만족하는 것으로 분석되었다. 추가로 수행한 3차원 수치해석 결과, 기둥 간격의 변화에 따라 슬래브 휨응력 변화를 전달시키지 못해 손상이 발생한 것으로 분석되었다. 보강을 위해 터널내 기둥을 추가하는 방안을 적용하였으며 그 결과, 상부 슬래브 비틀림 형상이 완화되어 보강 효과를 확인할 수 있었다. 단면 변화 구간의 경우 2차원 뿐만 아니라, 3차원으로 영향범위를 고려하여 설계에 반영한다면, 합리적이고 안정적으로 건설 및 유지관리가 가능할 것으로 판단된다. 추후에는 개착터널내 단면변화 구간에서 구조물에 영향을 최소화할 수 있는 보강방안에 대해 연구를 계속하고자 한다.

Keywords

References

  1. Jeong, J.S., Ji, Y.H., Cho, H., Hur, I.Y., Lee, S.H. (2012), "A study on behavior characteristics of liner plate with depth", Korean Tunnelling and Underground Space Association, Vol. 14, No. 2, pp. 131-139. https://doi.org/10.9711/KTAJ.2012.14.2.131
  2. Kong, B.S. (2009), "Structural stability analysis study for existing subway tunnels using a 3D stress-pore pressure coupled finite element modelling of NATM tunneling", Korea institute for Structural Maintenance Inspection, Vol. 13, No. 6, pp. 192-203.
  3. Korea Standards Association. (2012), "KS F 2712 : Testing method for half-cell potentials of reinforcing steel in concrete", The ministry of Knowledge Economy, Agency for Technology and Standards, pp. 1-10.
  4. Korea Standards Association. (2008), "KS F 2730 : Testing method for rebound number to conclude compressive strength of concrete", The ministry of Knowledge Economy, Agency for Technology and Standards, pp. 1-16.
  5. Korea Standards Association. (2008), "KS F 2731 : Testing method for velocity of ultrasonic pulses to conclude compressive strength of concrete", The ministry of Knowledge Economy, Agency for Technology and Standards, pp. 1-13.
  6. Korea Standards Association. (2009), "KS F 2734 : Testing method of detecting reinforcement by electromagnetic induction method", The ministry of Knowledge Economy, Agency for Technology and Standards, pp. 1-7.
  7. Korea Standards Association. (2009), "KS F 2596 : Method for measuring carbonation depth of concrete", The ministry of Knowledge Economy, Agency for Technology and Standards, pp. 1-10.
  8. Korea Infrastructure Safety & Technology Co. (2009), "Guideline(tunnel) about Safety check and inpection", Ministry of Land, Transport and Maritime Affairs, pp. 83-198.
  9. Mashimo, H., Isago, N., Kitani, T., Endou, T. (2006), "Effect of fiber reinforced concrete on shrinkage crack of tunnel lining", Tunnelling and Underground Space Technology, Vol. 21, pp. 382-383. https://doi.org/10.1016/j.tust.2005.12.194
  10. Park, S.W., Park, S.S., Hwang, I.B., Cha, C.J. (2012), "A case study on cause analysis for longitudinal crack of duct slab in tunnel", Korea institute for Structural Maintenance Inspection, Vol. 16, No. 5, pp. 19-28. https://doi.org/10.11112/jksmi.2012.16.5.019
  11. Wang, T.T. (2010), "Characterizing crack patterns on tunnel linings associated with shear deformation induced by instability of neighboring slopes", Engineering Geology, Vol. 115, pp. 80-95. https://doi.org/10.1016/j.enggeo.2010.06.010
  12. Weiss, W.J., Yang, W., Shah, S.P. (1998), "Shrinkage cracking of restrained concrete slabs", ASCE Journal of Engineering Mechanics, Vol. 124, No. 7, pp. 765-774. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:7(765)
  13. Yoo, C.S., Kim, J.M., Kim, H.C. (2009), "Numerical investigation on 3D behavior of 2-Arch tunnel", Korean Tunnelling and Underground Space Association, Vol. 11, No. 3, pp. 255-264.