References
- Eser A, Akca K, Eckert S, Cehreli MC. Nonlinear finite element analysis versus ex vivo strain gauge measurements on immediately loaded implants. Int J Oral Maxillofac Implants 2009;24:439-46.
- Iplikcioglu H, Akca K, Cehreli MC, Sahin S. Comparison of nonlinear finite element stress analysis with in vitro strain gauge measurements on a Morse taper implant. Int J Oral Maxillofac Implants 2003;18:258-65.
- Wierszycki M, Kakol W, Lodygowski T. Fatigue algorithm for dental implant. Found Civ Environ Eng 2006;7:363-80.
- Lin D, Li Q, Li W, Ichim I, Swain M. Damage evaluation of bone tissues with dental implants. Key Eng Mater 2007:905-8.
- Lang LA, Kang B, Wang RF, Lang BR. Finite element analysis to determine implant preload. J Prosthet Dent 2003;90:539-46. https://doi.org/10.1016/j.prosdent.2003.09.012
- Ihde S, Goldmann T, Himmlova L, Aleksic Z. The use of finite element analysis to model bone-implant contact with basal implants. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2008;106:39-48. https://doi.org/10.1016/j.tripleo.2007.12.005
- Cruz M, Wassall T, Toledo EM, da Silva Barra LP, Cruz S. Finite element stress analysis of dental prostheses supported by straight and angled implants. Int J Oral Maxillofac Implants 2009;24:391-403.
- Ban JH, Shin SW, Kim SJ, Lee JY. Three-dimensional finite element analysis on stress distribution of the mandibular implantsupported cantilever prostheses depending on the designs. J Korean Acad Prosthodont 2009;47:70-81. https://doi.org/10.4047/jkap.2009.47.1.70
- Lee CG, Paek JH, Kim TH, Kim MJ, Kim HS, Kwon KR, Woo YH. A FEM study on stress distribution of tooth-supported over dentures retained by telescopic crowns. J Korean Acad Prosthodont 2012;50:10-20. https://doi.org/10.4047/jkap.2012.50.1.10
- Himmlova L, Dostalova′T, Kacovska A, Konvickova S. Influence of implant length and diameter on stress distribution: a finite element analysis. J Prosthet Dent 2004;91:20-5. https://doi.org/10.1016/j.prosdent.2003.08.008
- Satis R, Ambrosio L, Nicolais L. Mechanical Properties oftooth structures. Barbucci R. Integrated biomaterials science. New York: Kluwer Academic; 2002, p. 589-99.
- Karl M, Graef F, Heckmann S, Taylor T. A methodology to study the effects of prosthesis misfit over time: an in vivo model. Int J Oral Maxillofac Implants 2009;24:689-94.
- Watanabe F, Uno I, Hata Y, Neuendorff G, Kirsch A. Analysis of stress distribution in a screw-retained implant prosthesis. Int J Oral Maxillofac Implants 2000;15:209-18.
- Karl M, Wichmann MG, Heckmann SM, Krafft T. Strain de- velopment in 3-unit implant-supported CAD/CAM restorations. Int J Oral Maxillofac Implants 2008;23:648-52.
- Cook Rd, Malkus DS, Plesha ME, Witt RJ. Concepts and Applications of Finite Element Analysis. 4th ed. New York, John Wiley & Sons, 1989, p. 259-68.
- Wierszycki M, Kakol W, Lodygowski T. The screw loosening and fatigue analyses of three dimensional dental implant model. In Proceedings of the 2006 Abaqus Users Conference, Rhode Island: Abaqus INC, USA, p. 389-403.
- Netter FH, The CIBA Collection of Medical Illustrations Vol. 1, Nervous System, 1997.
- Sohn BS, Heo SJ, Koak JY, Kim SK, Lee SY. Strain of implants depending on occlusion types in mandibular implant-supported fixed prostheses. J Adv Prosthodont 2011;3:1-9. https://doi.org/10.4047/jap.2011.3.1.1
- Qadeer S, Kerstein R, Kim RJ, Huh JB, Shin SW. Relationship between articulation paper mark size and percentage of force measured with computerized occlusal analysis. J Adv Prosthodont 2012;4:7-12. https://doi.org/10.4047/jap.2012.4.1.7
Cited by
- Computational Simulations of Bone Remodeling under Natural Mechanical Loading or Muscle Malfunction Using Evolutionary Structural Optimization Method vol.06, pp.03, 2014, https://doi.org/10.4236/eng.2014.63015
- The effect of using different crown and implant materials on bone stress distribution vol.5, pp.2, 2014, https://doi.org/10.1097/01.OMX.0000444266.10130.4c
- Desktop micro-CT image-based dynamic FEM analysis of stress wave pathways between mandibular trabecular bone and cortical bone with comparisons to virtual models with eliminated materials on pathways vol.11, pp.3, 2016, https://doi.org/10.1299/jbse.16-00313
- Development of FEA procedures for mechanical behaviors of maxilla, teeth and mandible vol.17, pp.6, 2016, https://doi.org/10.1007/s12541-016-0096-7
- The case study of masticatory force with food from full skull and partial model vol.18, pp.10, 2017, https://doi.org/10.1007/s12541-017-0173-6
- Automated Segmentation of Swine Skulls for Finite Element Model Creation Using High Resolution μ-CT Images pp.1793-6969, 2019, https://doi.org/10.1142/S0219876218420124
- A REVIEW OF FINITE ELEMENT APPLICATIONS IN ORAL AND MAXILLOFACIAL BIOMECHANICS vol.18, pp.02, 2018, https://doi.org/10.1142/S0219519418300028
- Determining the Patient-Specific Optimum Osteotomy Line for Severe Mandibular Retrognathia Patients pp.1049-2275, 2018, https://doi.org/10.1097/SCS.0000000000004470
- 정상 I급 교합과 Full-CUSP II급 교합의 두개골 구조거동 비교 해석연구 vol.29, pp.4, 2012, https://doi.org/10.7734/coseik.2016.29.4.309
- Influence of Dental Implant Design on Stress Distribution and Micromotion of Mandibular Bone vol.899, pp.None, 2012, https://doi.org/10.4028/www.scientific.net/amm.899.81
- Estimation of mass apparent density and Young’s modulus of femoral neck-head region vol.44, pp.7, 2020, https://doi.org/10.1080/03091902.2020.1799093
- Three‐dimensional finite element analysis of the dural folds and the human skull under head acceleration vol.304, pp.2, 2021, https://doi.org/10.1002/ar.24401