DOI QR코드

DOI QR Code

Performance Analysis of the Linear Induction Motor for the Deep-Underground High-Speed GTX

  • Park, Chan-Bae (Department of Electrical Engineering, Hanyang University (Railroad Propulsion System Research Team, Korea Railroad Research Institute)) ;
  • Lee, Hyung-Woo (Railroad Propulsion System Research Team, Korea Railroad Research Institute) ;
  • Lee, Ju (Division of Electrical and Biomedical Engineering, Hanyang University)
  • 투고 : 2011.02.22
  • 심사 : 2011.11.29
  • 발행 : 2012.03.01

초록

In order to develop a deep-underground great train express (GTX) in South Korea, the specifications decision and development of a traction control system (including an inverter and a traction motor), which considers a variety of route conditions, must be advanced. In this study, we examined the running resistance properties of a high-speed traction system based on a variety of tunnel types and vehicle organization methods. Then, we studied the power requirements necessary for the traction motor to maintain balanced speed in the high-speed traction system. From this, we determined the design criteria for the development of a high-speed traction system for use in the deep-underground GTX. Finally, we designed a linear induction motor (LIM) for a propulsion system, and we used the finite element method (FEM) to analyze its performance as it travelled through deep-underground tunnels.

키워드

참고문헌

  1. C.B. Park, B.S. Lee, and J. Lee, "A study on the applicability of the conventional TTX propulsion system on the high-speed propulsion system for a deep-underground GTX." International Journal of Railway, Vol. 3, No. 2, pp.54-59, June 2010.
  2. G. Wettschureck, Markus Heim, and Markus Tecklenburg, "Long-term properties of $Sylomer^{{\circledR}}$ ballast mats installed in the rapid transit railway tunnel near the Philharmonic Hall of Munich, Germany," Rail engineering international, vol.31, no.4, pp. 6-11, 2002.
  3. A. Baron, M. Mossi, and S. Sibilla, "The alleviation of the aerodynamic drag and wave effects of highspeed trains in very long tunnels," Journal of wind engineering and industrial aerodynamics, vol.89, no.5, pp. 365-401, 2001. https://doi.org/10.1016/S0167-6105(00)00071-4
  4. P. Lukaszewicz, "Running resistance and energy consumption of ore trains in Sweden," Journal of rail and rapid transit, Proceedings of the Institution of Mechanical Engineers. Part F, vol.223, no.2, pp. 189- 198, 2009. https://doi.org/10.1243/09544097JRRT233
  5. T. Obata, S. Sugawara, "Maintenance and Management of the Undersea Section of the Seikan Tunnel," Japanese railway engineering, vol.39, no.1, pp. 16-20, 1999.
  6. Lee H.-W., Lee S., Park C., Lee J., Park H.-J., "Characteristic Analysis of a Linear Induction Motor for a Lightweight Train according to Various Secondary Schemes", International Journal of Railway, vol.1, no.1, pp. 6-11, 2008.
  7. Wei Xu, et al., "Equivalent circuits for single-sided linear induction motors" IEEE Trans. Industry Applications, vol. 46, no. 6, pp. 2410-2423, 2010. https://doi.org/10.1109/TIA.2010.2073434
  8. A.Z. Bazghaleh, M.R. Naghashan, and M.R. Meshkatoddini, "Optimum design of single-sided linear induction motors for improved motor performance" IEEE Trans. Magnetics, vol. 46, no. 11, pp. 3939-3947, 2010. https://doi.org/10.1109/TMAG.2010.2062528
  9. I. Boldea, and S.A. Nasar, "Linear motion electromagnetic devices", New York: Taylor & Francis, 2001, pp. 64-69.
  10. Jacek F. Gieras, "Linear induction drives", Tokyo: Oxford: Clarendon, 1994, pp.12-16.
  11. T.A. Lipo, "Introduction to AC Machine Design, Vol.1", Madison Wisconsin: University of Wisconsin, 1996, pp.333-338.
  12. Sakae Yamamura, "Theory of Linear Induction Motors", Tokyo: University of Tokyo Press, 1978, pp.111-118.
  13. R.C. Creppe, J.A. Covolan Ulson, and J.F. Rodrigues, "Influence of design parameters on linear induction motor end effect" IEEE Trans. Energy Conversion, vol. 23, no. 2, pp. 358-362, 2008. https://doi.org/10.1109/TEC.2008.918594
  14. Y. Nozaki, T. Koseki and E. Masada, "Analysis of Linear Induction Motors for HSST and Linear Metro using Finite Difference Method," Proc. LDIA2005, pp 168-171, 2005.
  15. A.H. Isfahani, B.M. Ebrahimi, and H. Lesani, "Design optimization of a low-speed single-sided linear induction motor for improved efficiency and power factor" IEEE Trans. Magnetics, vol. 44, no. 2, pp. 266-272, 2008. https://doi.org/10.1109/TMAG.2007.912646
  16. Y. Srinivasa Rao, and M.C. Chandorkar, "Rea-time electrical load emulator using optimal feedback control technique" IEEE Trans. Industrial Electronics, vol. 57, no. 4, pp. 1217-1225, 2010. https://doi.org/10.1109/TIE.2009.2037657
  17. A. Das, K. Sivakumar, R. Ramchand, C. Patel, and K. Gopakumar, "A pulsewidth modulated control of induction motor drive using multilevel 12-sided polygonal voltage space vectors" IEEE Trans. Industrial Electronics, vol. 56, no.72, pp. 2441-2449, 2009. https://doi.org/10.1109/TIE.2009.2020075

피인용 문헌

  1. A New Approach to Evaluate Influence of Transverse Edge Effect of a Single-Sided HTS Linear Induction Motor Used for Linear Metro vol.51, pp.3, 2015, https://doi.org/10.1109/TMAG.2014.2359513
  2. Deep subterranean railway system: Acceptability assessment of the public discourse in the Seoul Metropolitan Area of South Korea vol.77, 2015, https://doi.org/10.1016/j.tra.2015.04.008
  3. Research on the Correlation of Control Malfunction with Induced Voltage of Control Signal Line According to Voltage Change of a Power Line vol.11, pp.3, 2016, https://doi.org/10.5370/JEET.2016.11.3.775