반도체디스플레이기술학회지 (Journal of the Semiconductor & Display Technology)

한국반도체디스플레이기술학회 (The Korean Society Of Semiconductor & Display Technology)
권호 표지

고분자 압출기에 있어서 계량부 용융수지의 유동해석

An Analysis of a Thermo-plastic Melt Flow in the Metering Zone of a Polymer Extruder

  • 최만성 (한국기술교육대학교 메카트로닉스공학부) ;
  • 김광선 (한국기술교육대학교 메카트로닉스공학부)
  • Choi, Man Sung (School of Mechatronics Engineering, Korea University of Technology and Education) ;
  • Kim, Kwang Sun (School of Mechatronics Engineering, Korea University of Technology and Education)
  • 투고 : 2012.11.07
  • 심사 : 2012.11.30
  • 발행 : 2012.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Extrusion is one of the most important operations in the polymer-processing industry. Development of models for extrusion and computer tools offer a route to developing reliable and optimized process designs. The models are based on the analysis of physical phenomena encountered during the process. Balance equations for mass, momentum and energy are fundamental to the problem. A predictive computer model has been developed for the single screw extruders with conventional screws of different geometry. The model takes into account melting zones of the extruder and describes an operation of the extruder system, making it possible to predict mass flow rate of the polymer, pressure and velocity profiles along the extruder screw channel. The simulation parameters are the material and rheological properties of the polymer; the screw pitch, and screw speed.

키워드

참고문헌

  1. Zdanski. P.S.B.., and Vaz Jr, M., "Non-Isothermal Polymer Melt Flow in Sudden Expansions", J. Non-Newtonian Fluid Mech. Vol. 161, pp. 42-.47, 2009 https://doi.org/10.1016/j.jnnfm.2009.04.004
  2. Rauwendaal, C., "Polymer Extrusion", 4th Edition, Hanser Publishers, 2001
  3. Liang.J.-Z., "Pressure Effect of Viscosity for Polymer Fluids in Die Flow," Polymer Vol. 42 pp. 3709-3712, 2001 https://doi.org/10.1016/S0032-3861(00)00507-3
  4. Nijmeijer, H., and Savaresi, S. M.," On Approximate Model Reference Control of SISO Discrete-Time Nonlinear Systems. Automatica, Vol. 34, No. 10, pp. 1261 -1266, 1998 https://doi.org/10.1016/S0005-1098(98)00064-8
  5. 주용락, "고분자 압출가공이론," 고분자 과학과 기술, 제 7 권 제 3 호, pp. 271-279, 1996.
  6. Bao. W,, "An Economical Finite Element Approximation of Generalized Newtonian Flow ," Computer Methods in Applied Mechanics and Engineering Vol.191, pp, 3637-3648, 2003.
  7. Missirlis. K. A, Assimacopoulos. D, and Mitsoulis. E.,"A Finite Volume Approach in the Simulation of Viscoelastic Expansion Flows," J. of Non-Newtonian Fluid Mechanics Vol. 78, pp. 91-118, 1998. https://doi.org/10.1016/S0377-0257(98)00057-3