실험계획법을 이용한 진공유리 Pillar의 배치공정 최적화

The Arrangement Process Optimization of Vacuum Glazing Pillar using the Design of Experiments

  • Kim, Jae Kyung (Graduate School of Mechanical Engineering, Kongju National University) ;
  • Jeon, Euy Seik (Graduate School of Mechanical Engineering, Kongju National University)
  • 투고 : 2012.02.22
  • 심사 : 2012.03.15
  • 발행 : 2012.03.31

초록

In this study, the optimal process condition was induced about the pillar arrangement process of applying the screen printing method in the manufacture process of vacuum glazing panel. The high precision screen printing is technology which pushes out the paste and spreads it by using the squeegee on the stainless steel plate in which the pattern is formed. The screen printing method is much used in the flat panel display field including the LCD, PDP, FED, organic EL, and etc for forming the high precision micro-pattern. Also a number of studies of screen printing method have been conducted as the method for the cost down through the improvement of productivity. The screen printing method has many parameters. So we used Taguchi method in order to decrease test frequencies and optimize this parameters efficiently. In this study, experiments of pillar arrangement were performed by using Taguchi experimental design. We analyzed experimental results and obtained optimal conditions which are 4 m/s of squeegee speed, $40^{\circ}$ of squeegee angle and distance between metal mask and glass.

키워드

참고문헌

  1. R. E. Collins and A. C. Fischer-Scripps., "Design of pillar arrays in' flat evacuated windows" Australian Journal of Physics 44, pp. 73-86, 1991.
  2. Saint-Gobain Glass France, "Sealed Vacuum Double Glazing and Method for Making", PCT No. WO00/34614, 2000.
  3. Nippon Sheet Glass, "Process for Producing Vacuum Glass Panel and Vacuum Glass Panel Produced Thereby", PCT No. PCT/JP2003/015112, 2003.
  4. 김광영, 함영복, 최병오, 남수용, "PDP 제조용 스크린 인쇄장비의 적용현황", 한국기계연구원 재료연구소, 기계와 재료, State of the art report, Vol.12 no.4, pp.46-58, 2000.
  5. J. K. Kim and E. S. Jeon, 2010, " Stress Analysis of the Vacuum glazing according to the Pillar shapes and Arrangements using Finite Element Method", Journal of the Semiconductor & Display Technology, Vol. 9, No. 1, pp. 49-54, 2010.
  6. 이상복, "Minitab 을 이용한 다구찌 기법 활용", 이레테크, 2006.
  7. S.H Park, "Design of experiments", Minyoungsa, 2008.