한국전자파학회논문지 (The Journal of Korean Institute of Electromagnetic Engineering and Science)

  • 제23권12호
  • /
  • Pages.1359-1364
  • /
  • 2012
  • /
  • 1226-3133(pISSN)
  • /
  • 2288-226X(eISSN)
한국전자파학회 (The Korean Institute of Electromagnetic Engineering and Science)
권호 표지
DOI QR코드

DOI QR Code

칩 인덕터를 사용하여 광대역 저지 특성을 갖는 소형 C-밴드 Semi-Lumped 저역 통과 여파기

A Compact C-Band Semi-Lumped Lowpass Filter with Broad Stopband Using a Chip Inductor

  • 장기언 (경북대학교 전자전기컴퓨터학부) ;
  • 이기문 ((주)한화 체계종합부) ;
  • 김하철 (한국해군사관학교 전기전자공학부) ;
  • 최현철 (경북대학교 전자전기컴퓨터학부)
  • Jang, Ki-Eon (School of Electrical Engineering and Computer Science, Kyungpook National University) ;
  • Lee, Gi-Moon (Precision-Guided Munitions System Integration Department, Hanwha Corporation) ;
  • Kim, Ha-Chul (Department of Electrical Engineering, Republic of Korea Naval Academy) ;
  • Choi, Hyun-Chul (School of Electrical Engineering and Computer Science, Kyungpook National University)
  • 투고 : 2012.06.26
  • 심사 : 2012.12.05
  • 발행 : 2012.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

칩 인덕터를 이용하여 넓은 저지 대역과 소형화 특성을 갖는 C-밴드 semi-lumped 저역 통과 여파기를 제안하였다. 칩 인덕터의 자기 공진 주파수(SRF: Self Resonance Frequency) 특성을 유지하기 위하여 추가된 분리형 인덕터와 SRF 특성으로 인해 발생되는 감쇠 폴을 이용하여 광대역 저지 대역과 높은 저지 특성을 얻을 수 있었다. 3차 elliptic function 여파기에 칩 인덕터(L: 9.1 nH, SRF: 5.5 GHz, Q: 25)를 적용한 결과, 마이크로스트립 라인 인덕터로 구현한 여파기보다 크기가 37.4 % 감소하였으며, 삽입 손실이 0.38 dB, 차단 주파수는 920 MHz, 1.43~7.8 GHz의 넓은 저지 대역(20 dB 이하) 특성을 가졌다.

The C-band semi-lumped lowpass filter with broad stopband and compact size characteristic using chip inductor is proposed. To provide an additional attenuation pole in stopband by SRF, a separable inductor is added to proposed structure, and it has broad stopband characteristic. The third order elliptic function lowpass filter with chip inductor(L: 9.1 nH, SRF: 5.5 GHz, Q: 25) has insertion loss of 0.38 dB, cutoff frequency of 920 MHz, broad stopband(below 20 dB) of 1.43~7.8 GHz and the size is reduced 37.4 % compared to distributed inductor.

키워드

참고문헌

  1. G. L. Mattaei, L. Young, and E. M. T. Jones, Microwave Filters, Impedance Matching Networks and Coupling Structures, Artech House, pp. 83-112, 1980.
  2. I. Bahl, P. Bhartia, Microwave Solid State Circuit Design, John Wiley & Son, pp. 286-291, 2003.
  3. W. H. Tu, K. Chang, "Microwave elliptic-function low-pass filters using distributed elements or slotted ground structure", IEEE Trans. MTT, vol. 54, no. 10, pp. 3786-3792, Oct. 2006. https://doi.org/10.1109/TMTT.2006.882896
  4. L. -H. Hsieh, K. Chang, "Compact elliptic-function low-pass filters using microstrip stepped-impedance hairpin resonators", IEEE Trans. MTT, vol. 51, no. 1, pp. 193-199, Jan. 2003.
  5. J. G. Lee, W. S. Lee, J. J. Ryu, Y. K. Moon, J. H. Jang, H. C. Kim, and H. C. Choi, "Compact semilumped elliptic-function low-pass filter using microstrip meander line", Microw. Opt. Technol. Lett., vol. 49, no. 7, pp. 1777-1779, Jul. 2007. https://doi.org/10.1002/mop.22545
  6. K. Kim, S. Kim, H. Han, I. Park, and H. Lim, "Compact microstrip low-pass filter using shunt open stubs and coupled slots on ground plane", Eletron. Lett., vol. 40, no. 5, pp. 313-314, Mar. 2004. https://doi.org/10.1049/el:20040226
  7. S. Hasegawa, T. Yasuzumi, T. Uwano, and O. Hashimoto, "A compact LPF with broad stopband characteristics using hairpin structure and chip-capacitor", in Proc. Asia Pacific Microwave Conf., Singapore, pp. 2588-2590, Dec. 2009.
  8. J. -W. Sheen, "A compact semi-lumped low-pass filter for harmonics and spurious suppression", IEEE Microw. Guide Wave Lett., vol. 10, no. 3, pp. 92-93, Mar. 2000. https://doi.org/10.1109/75.845707
  9. www.murata.com(Datasheet of LWQ15A chip inductor)
  10. Jia-Sheng Hong, M. J. Lancaster, Microstrip Filters for RF/Microwave Applications, John Wiley & Son, pp. 44-46, 2001.