References
- C. J. Weng, "Advanced Thermal Enhancement and Management of LED Packages", Inter. Commun. Heat Mass Transfer., 36, 245 (2009). https://doi.org/10.1016/j.icheatmasstransfer.2008.11.015
- K. Y. Kim and K. K. Ham, "The Technical Trend of Heat Dissipation for High Power LED Flood Light", Proc. KIIEE Spring Conference, Yongpyung, 214, Korean Institute of Illuminating and Electrical Installation Engineers (2009).
- S. J. Lee, J. S. Lee and Y. J. Kim, "Synthesis and Optical Properties of M-Si(Al)-O-N (M: Sr, Ca) Phosphors for White Light Emitting Diodes", J. Microelectron. Packag. Soc., 19(2), 41 (2012). https://doi.org/10.6117/kmeps.2012.19.2.041
- J. Hu, L. Yang and M. W. Shin, "Electrical, Optical and Thermal Degradation of High Power GaN/InGaN Light-Emitting Diodes", J. Phys. D: Appl. Phys. 41, 1 (2008). https://doi.org/10.1051/epjap:2007176
- S. H. Kim, S. I. Lee, J. K. Yang and D. H. Park, "Analysis of Thermal Properties in LED Package by Via-Hole and Dimension of FR4 PCB", J. KIEEME, 24, 234 (2011). https://doi.org/10.4313/JKEM.2011.24.3.234
- S. Chan and J. S. Jang, "Accelerated Degradation Stress of High Power Phosphor Converted LED Package", J. Microelectron. Packag. Soc., 17(4), 19 (2010).
- J. Park, M. W. Shin and C. C. Lee, "Measurement of Temperature Profiles on Visible Light-Emitting Diodes by Use of a Nematic Liquid Crystal and an Infrared Laser", Optics Lett., 29, 2656 (2004). https://doi.org/10.1364/OL.29.002656
- H. W. Shin, H. S. Lee, J. O. Bang, S. H. Yoo, S. B. Jung and K. D. Kim, "Variation of Thermal Resistance of LED Module Embedded by Thermal Via", J. Microelectron. Packag. Soc., 17(4), 95 (2010).
- M. H. Lee, T. J. Lee, H. J. Lee and Y. J. Kim, "Design and Fabrication of Metal PCB Based on the Patterned Anodizing for Improving Thermal Dissipation of LED Lighting", Proc. 5th Int. Conference on Microsys. Pack. Assembly Circuits Technol., 1, Taipei, IEEE (2010).
- J. Petroski, "Spacing of High-Brightness LEDs on Metal Substrate PCB's for Proper Thermal Performance", Proc. Intersoc. Conference Thermal & Thermomech. Phenomena Electron. Systems, 507, Las Vegas, IEEE (2004).
- A. Christensen and S. Graham, "Thermal Effects in Packaging High Power Light Emitting Diode Arrays", Appl. Thermal Engineer., 29, 364 (2009). https://doi.org/10.1016/j.applthermaleng.2008.03.019
- M. Arik, C. Becker, S. Weaver and J. Petroski, "Thermal Management of LEDs: Package to System", Proc. 3th Int. Conference Solid State Lighting, 64, San Diego, International Society for Optics and Photonics (2004).
- W. K. Jeung, S. H. Shin, S. Y. Hong, S. M. Choi, S. Yi, Y. B. Yoon, H. J. Kim, S. J. Lee and K. Y. Park, "Silicon-Based, Multi-Chip LED Package", Proc. 57th Electron. Comp. Technol. Conference(ECTC), Reno, 722, IEEE CPMT (2007).
- L. Yang, S. Jang, W. J. Hwang and M. W. Shin, "Thermal Analysis of High Power GaN-Based LEDs with Ceramic Package", Thermochimica Acta, 455, 95 (2007). https://doi.org/10.1016/j.tca.2006.11.019
- K. S. Kim, Y. C. Lee, J. H. Ahn, J. Y. Song, C. D. Yoo and S. B. Jung, "Effect of Process Parameters on TSV Formation Using Deep Reactive Ion Etching", Korean J. Met. Mater., 48, 1028 (2010). https://doi.org/10.3365/KJMM.2010.48.11.1028
- Y. M. Jung and Y. C. Kim, "Fabrication of a (100) Silicon Master Using Anisotropic Wet Etching for Embossing", J. Korean Ceram. Soc., 42, 645 (2005). https://doi.org/10.4191/KCERS.2005.42.10.645
- Y. Cao, W. Ning and L. Luo, "Wafer-Level Package with Simultaneous TSV Connection and Cavity Hermetic Sealing by Solder Bonding for MEMS Device", IEEE Trans. Electron. Pack. Manuf., 32, 125 (2009). https://doi.org/10.1109/TEPM.2009.2021766
- C. R. Yang, P. Y. Chen, C. H. Yang, Y. C. Chiou and R. T. Lee, "Effects of Various Ion-Typed Surfactants on Silicon Anisotropic Etching Properties in KOH and TMAH Solutions", Sens. Actuators A, 119, 271 (2005). https://doi.org/10.1016/j.sna.2004.09.017
- K. Biswas, S. Das, D. K. Maurya, S. Kal and S. K. Lahiri, "Bulk Micromachining of Silicon in TMAH-Based Etchants for Aluminium Passivation and Smooth Surface", Microelectron. J., 37, 321 (2006). https://doi.org/10.1016/j.mejo.2005.05.013
- P. H. Chen, H. Y. Peng, C. M. Hsieh and M. K. Chyu, "The Characteristic Behavior of TMAH Water Solution for Anisotropic Etching on Both Silicon Substrate and SiO2 Layer", Sens. Actuators A, 93, 132 (2001). https://doi.org/10.1016/S0924-4247(01)00639-2
- I. Zubel and M. Kramkowska, "The Effect of Isopropyl Alcohol on Etching Rate and Roughness of (100) Si Surface Etched in KOH and TMAH Solutions", Sens. Actuators A, 93, 138 (2001). https://doi.org/10.1016/S0924-4247(01)00648-3
- H. Seidel, L. Csepregi, A. Heuberger and H. Baumgartel, "Anisotropic Etching of Crystalline Silicon in Alkaline Solutions", J. Electrochem. Soc., 137, 3626 (1990). https://doi.org/10.1149/1.2086278
- I. Zubel, I. Barycka, K. Kotowska and M. Kramkowska, "Silicon Anisotropic Etching in Alkaline Solutions IV: The Effect of Organic and Inorganic Agents on Silicon Anisotropic Etching Process", Sens. Actuators A, 87, 163 (2001). https://doi.org/10.1016/S0924-4247(00)00481-7
- L. M. Landsberger, S. Naseh, M. Kahrizi and M. Paranjape, "On Hillocks Generated during Anisotropic Etching of Si in TMAH", J. Microelectromech. Sys., 5, 106 (1996). https://doi.org/10.1109/84.506198
Cited by
- Characterization of GaN epitaxial layer grown on nano-patterned Si(111) substrate using Pt metal-mask vol.21, pp.3, 2014, https://doi.org/10.6117/kmeps.2014.21.3.067
- Cu Through-Via Formation using Open Via-hole Filling with Electrodeposition vol.21, pp.4, 2014, https://doi.org/10.6117/kmeps.2014.21.4.117
- The Effects of Cu TSV on the Thermal Conduction in 3D Stacked IC vol.21, pp.3, 2014, https://doi.org/10.6117/kmeps.2014.21.3.063