참고문헌
- M.-Y. Lyu, "Polymer shaping processes and application of CAE", Polym. Sci. Technol., 14, 6 (2003).
- Pandelidis and Q. Zou, "Optimization of injection molding design. Part I: Gate location optimization", Polym. Eng. Sci., 30, 873 (1990). https://doi.org/10.1002/pen.760301502
- N. Dontula, P. C. Sukanek, H. Devanathan, and G. A. Campbell, "An experimental and theoretical investigation of transient melt temperature during injection molding", Polym. Eng. Sci., 31, 1674 (1991). https://doi.org/10.1002/pen.760312308
- K. Amellal, C. Tzoganakis. A. Penlidis, and G. L. Rempel, "Injection Molding of Medical Plastics: A Review", Adv. Polym. Tech., 13, 315 (1994). https://doi.org/10.1002/adv.1994.060130407
- G. Bateh, "Extension of 21/2 D Control Volume Methods for Transverse Flow at Sprues, Gates and Junctions", Intern. Polym. Process., 12, 257 (1997). https://doi.org/10.3139/217.970257
- S .L. Wen, C. K. Jen, and K. T. Nguyen, "Advances in on-line monitoring of the injection molding process using ultrasonic techniques", Intern. Polym. Process., 14, 175 (1999).
- J. L. Berger and C. G. Gogos, "A numerical simulation of the cavity filling process with PVC in injection molding", Polym. Eng. Sci., 13, 102 (1973). https://doi.org/10.1002/pen.760130205
- H. H. Chiang, C. A. Hieber, and K. K. Wang, "A unified simulation of the filling and postfilling stages in injection molding. Part I: Formulation", Polym. Eng. Sci., 31, 116 (1991). https://doi.org/10.1002/pen.760310210
- H. H. Chiang, C. A. Hieber, and K. K. Wang, "A unified simulation of the filling and postfilling stages in injection molding. Part I: Formulation", Polym. Eng. Sci., 31, 125 (1991). https://doi.org/10.1002/pen.760310211
- G. Titomanlio and V. Speranza, V. Brucato, "On the simulation of thermoplastic injection moulding process .2. Relevance of interaction between flow and crystallization", Intern. Polym. Process., 12, 45 (1997). https://doi.org/10.3139/217.970045
- M. Buchmann, R. Theriault, and T. A. Osswald, "Polymer flow length simulation during injection mold filling", Polym. Eng. Sci., 37, 667 (1997). https://doi.org/10.1002/pen.11710
- R. E. Hayes, H. H. Dannelongue, and P. A. Tanguy, "Numerical simulation of mold filling in reaction injection molding", Polym. Eng. Sci., 31, 842 (1991). https://doi.org/10.1002/pen.760311111
- Hae-Yeon Kim and Min-Young Lyu, "Introduction to Polymer Shaping Processes and Their Principles", Polym. Sci. Technol., 20, 157 (2009).
- Rong Zheng, Roger I. Tanner, and Xi-Jun Fan "Injection Molding: Integration of Theory and Modeling Methods", pp. 35-44, NY, Spinger (2011).
피인용 문헌
- The Application of 3D Injection Molding Simulation in Gate Location Selection for Automotive Console vol.18, pp.3, 2014, https://doi.org/10.9726/kspse.2014.18.3.051
- A study on the Powder Injection Molding of Translucent Alumina via Flowability Simulation of Powder/Binder Mixture vol.21, pp.3, 2014, https://doi.org/10.4150/KPMI.2014.21.3.215
- Prediction of Mechanical Property of Glass Fiber Reinforced Polycarbonate and Evaluation of Warpage through Injection Molding vol.38, pp.6, 2014, https://doi.org/10.7317/pk.2014.38.6.708