References
- A. K. Bledzki and J. Gassan, "Composites reinforced with cellulose based fibres", Prog. Polym. Sci., 24, 221 (1999). https://doi.org/10.1016/S0079-6700(98)00018-5
- R. Karnani, M. Krishnan, and R. Narayan, "Biofiber-reinforced polypropylene composites", Polym. Eng. Sci., 37, 476 (1997). https://doi.org/10.1002/pen.11691
- T. M. Gowd, A.C.B. Naidu, and R. Chhay, "Some mechanical properties of untreated jute fabric-reinforced polyester composites", Compos. Part A, 30, 277 (1999). https://doi.org/10.1016/S1359-835X(98)00157-2
- A. C. Karmaker and J. A. Youngquist, "Injection molding of polypropylene reinforced with short jute fibers", J. Appl. Polym. Sci., 62, 1147 (1996). https://doi.org/10.1002/(SICI)1097-4628(19961121)62:8<1147::AID-APP2>3.0.CO;2-I
- G. Krekel, U. J. Zielke, K. J. Hüttinger, and W. P. Hoffman, "The relevance of the surface structure and surface chemistry of carbon fibres in their adhesion to high temperature thermoplastics. Part III Interface adhesion and reinforcement effects", J. Mater. Sci., 29, 3984 (1994). https://doi.org/10.1007/BF00355958
- J. Harvey, C. Kozlowski, and P. M. A. Sherwood, "X-ray photoelectron spectroscopic studies of carbon fibre surfaces. Part 6 Pilot plant surface treatment and epoxy resin composites", J. Mater. Sci., 22, 1585 (1987). https://doi.org/10.1007/BF01132378
- C. A. Baillie and M. G. Bader, "Some aspects of interface adhesion of electrolytically oxidized carbon fibres in an epoxy-resin matrix", J. Mater. Sci., 29, 3822 (1994). https://doi.org/10.1007/BF00357355
- H.-T. Chiu and J.-S. Lin, "Electrochemical deposition of polypyrrole on carbon fibres for improved adhesion to the epoxy resin matrix", J. Mater. Sci., 27, 319 (1992).
- I.-C. Kim and T.-H. Yoon, "Enhanced interfacial adhesion of carbon fibers to vinyl ester resin using poly(arylene ether phosphine oxide) coatings as adhesion promoters", J. Adhes. Sci. Technol., 14, 545 (2000). https://doi.org/10.1163/156856100742735
- H. M. Kang, T. H. Yoon, M. Bump, and J. S. Riffle, "Effect of solubility and miscibility on the adhesion behavior of polymer- coated carbon fibers with vinyl ester resins", J. Appl. Polym. Sci., 79, 1042 (2001). https://doi.org/10.1002/1097-4628(20010207)79:6<1042::AID-APP70>3.0.CO;2-2
- J. J. Lesko, F. E. Swain, J. M. Cartwright, J. W. Chin, K. L. Reifsnider, D. A. Dillard, and J. P. Wightman, "Interphases Developed from Fiber Sizings and Their Chemical-Structural Relationship to Composite Compressive Performance", J. Adhes., 45, 43 (1994). https://doi.org/10.1080/00218469408026628
- S. D. Jenkins, G. T. Emmerson, P. T. McGrail, and R. M. Robinson, "Thermoplastic Sizing of Carbon Fibres in High Temperature Polyimide Composites", J. Adhes., 45, 15 (1994). https://doi.org/10.1080/00218469408026626
- E. M. Liston, "Plasma Treatment for Improved Bonding: A Review", J. Adhes., 30, 199 (1989). https://doi.org/10.1080/00218468908048206
- G. J. Farrow and C. Jones, "The Effect of Low Power Nitrogen Plasma Treatment of Carbon Fibres on the Interfacial Shear Strength of Carbon Fibre/Epoxy Composites", J. Adhes., 45, 29 (1994). https://doi.org/10.1080/00218469408026627
- G. J. Farrow and K. E. Atkinson, N. Fluck and C. Jones, "Effect of low-power air plasma treatment on the mechanical properties of carbon fibres and the interfacial shear strength of carbon fibre-epoxy composites", Surf. Interface Anal., 23, 313 (1995). https://doi.org/10.1002/sia.740230507
- B. Okhuysen, R. C. Cochran, R. E. Allred, F. Sposili, and T. M. Donnellan, "Interface/Interphase Studies in Epoxy Matrix Composites", J. Adhes., 45, 3 (1994). https://doi.org/10.1080/00218469408026625
- S. Mujin, H. Baorong, W. Yisheng, T. Ying, H. Weiqui, and D. Youxian, "The surface of carbon fibres continuously treated by cold plasma", Compos. Sci. Technol., 34, 353 (1989). https://doi.org/10.1016/0266-3538(89)90004-3
- B. S. Jin, K. H. Lee, and C. R. Choe, "Properties of carbon fibers modified by oxgen plasma", Polym. Int., 34, 181 (1994). https://doi.org/10.1002/pi.1994.210340209
- G. Dagli and N.-H. Sung, "Properties of carbon/graphite fibers modified by plasma polymerization", Polym. Compos., 10, 109 (1989). https://doi.org/10.1002/pc.750100208
- N. Dilsiz, E. Ebert, W. Weisweiler, and G. J. Akovali, "Effect of Plasma Polymerization on Carbon Fibers Used for Fibers/Epoxy Composites", J. Colloid Interf. Sci., 170, 241 (1995) https://doi.org/10.1006/jcis.1995.1093
- S. Feih and P. Schwartz, "Modification of the carbon fiber/ matrix interface using gas plasma treatment with acetylene and oxygen", J. Adhes. Sci. Technol., 12, 523 (1998). https://doi.org/10.1163/156856198X00209
- L. Y. Yuan, S. S. Shyu, and J. Y. Lai, "Plasma surface treatments of carbon fibers. Part 2: Interfacial adhesion with poly(phenylene sulfide)", Compos. Sci. Technol., 45, 9 (1992). https://doi.org/10.1016/0266-3538(92)90117-L
- W. Weisweiler, in: NATO ASI Series, Series. E, No. 230, Interfacial Interactions in Polymeric Composites, G. Akovali (Ed.), p. 269. Kluwer Academic, Boston (1993).
- Y. L. Zou and A. N. Netravali, "Ethylene/ ammonia plasma polymer deposition for controlled adhesion of graphite fibers to PEEK", J. Adhes. Sci. Technol., 9, 1505 (1995). https://doi.org/10.1163/156856195X00158
- N. Lopattananon, A. P. Kettle, D. Tripathi, A. J. Beck, E. Duval, R. M. France, R. D. Short, and F. R. Jones, "Interface molecular engineering of carbon-fiber composites", Compos. Part A, 30, 49 (1999). https://doi.org/10.1016/S1359-835X(98)00109-2
- G. Mathew, M.-Y. Huh, J. M. Rhee, M.-H. Lee, and C. Nah, "Improvement of properties of silica-filled styrene-butadiene rubber composites through plasma surface modification of silica", Polym. Adv. Technol., 15, 400 (2004). https://doi.org/10.1002/pat.482
- S. G. Lee, S.-S. Choi, W. H. Park, and D. Cho, "Characterization of surface modified flax fibers and their biocomposites with PHB", Macromol. Symp., 197, 89 (2003). https://doi.org/10.1002/masy.200350709
- X. Yuan, K. Jayaraman, and D. Bhattacharyya, "Mechanical properties of plasma-treated sisal fibre-reinforced polypropylene composites", J. Adhes. Sci. Tech., 18, 1027 (2004). https://doi.org/10.1163/1568561041257478
Cited by
- Plasma Treatment in Textile Industry vol.12, pp.2, 2014, https://doi.org/10.1002/ppap.201400052
- Characterization of Physical, Mechanical and Chemical Properties of Quiscal Fibres: The Influence of Atmospheric DBD Plasma Treatment vol.35, pp.5, 2015, https://doi.org/10.1007/s11090-015-9630-0
- Searching for Natural Conductive Fibrous Structures via a Green Sustainable Approach Based on Jute Fibers and Silver Nanoparticles vol.10, pp.1, 2018, https://doi.org/10.3390/polym10010063