DOI QR코드

DOI QR Code

Synthesis and Performance of Li2MnSiO4 as an Electrode Material for Hybrid Supercapacitor Applications

  • Karthikeyan, K. (Faculty of Applied Chemical Engineering, Chonnam National University) ;
  • Amaresh, S. (Faculty of Applied Chemical Engineering, Chonnam National University) ;
  • Son, J.N. (Faculty of Applied Chemical Engineering, Chonnam National University) ;
  • Lee, Y.S. (Faculty of Applied Chemical Engineering, Chonnam National University)
  • 투고 : 2012.05.10
  • 심사 : 2012.06.08
  • 발행 : 2012.06.30

초록

$Li_2MnSiO_4$ was synthesized using the solid-state method under an Ar atmosphere at three different calcination temperatures (900, 950, and $1000^{\circ}C$). The optimization of the carbon coating was also carried out using various molar concentrations of adipic acid as the carbon source. The XRD pattern confirmed that the resulting $Li_2MnSiO_4$ particles exhibited an orthorhombic structure with a $Pmn2_1$ space group. Cyclic voltammetry was utilized to investigate the capacitive behavior of $Li_2MnSiO_4$ along with activated carbon (AC) in a hybrid supercapacitor with a two-electrode cell configuration. The $Li_2MnSiO_4$/AC cell exhibited a high discharge capacitance and energy density of $43.2Fg^{-1}$ and $54Whkg^{-1}$, respectively, at $1.0mAcm^{-2}$. The $Li_2MnSiO_4$/AC hybrid supercapacitor exhibited an excellent cycling stability over 1000 measured cycles with coulombic efficiency over > 99 %. Electrochemical impedance spectroscopy was conducted to corroborate the results that were obtained and described.

키워드

참고문헌

  1. B. E. Conway, Electrochemical Supercapacitors, Kluwer- Plenum, New York (1999).
  2. Y. Zhang, H. Feng, X. Wu, L. Wang, A. Zhang, T. Xia, H. Dong, X. Li, and L. Zhang, Int. J. Hydrogen Energ., 34, 4889-4899 (2009). https://doi.org/10.1016/j.ijhydene.2009.04.005
  3. P. Simon and Y. Gogosti, Nat. Mater., 7, 845-854 (2008). https://doi.org/10.1038/nmat2297
  4. I. Plitz, A. Dupasquier, F. Badway, J. Gural, N. Pereira, A. Gmitter, and G. G. Amatucci, Appl. Phys. A., 82, 615-626 (2006). https://doi.org/10.1007/s00339-005-3420-0
  5. A. S. Arico, P. G. Bruce, B. Scrosati, J. M. Tarascon, and W. V. Schalkwijk, Nat. Mater, 4, 366-377 (2005). https://doi.org/10.1038/nmat1368
  6. X. L. Wu, L. Y. Jiang, F. F. Cao, Y .G. Guo, and L. J. Wan, Adv. Mater., 21, 2710-2714 (2009). https://doi.org/10.1002/adma.200802998
  7. Y. G. Wang, J. Y. Lou, W. Wu, C. X. Wang and Y. Y. Xia, J. Electrochem. Soc., 154 (2007) A228-A234. https://doi.org/10.1149/1.2432056
  8. A. D. Pasquier, A. Laforgue, and P. Simon, J. Power Sources., 125, 95-102 (2004). https://doi.org/10.1016/j.jpowsour.2003.07.015
  9. J. Y. Luo, J. L. Liu, P. He, and Y.-Y. Xia, Electrochim. Acta., 53, 8128-8133 (2008). https://doi.org/10.1016/j.electacta.2008.05.080
  10. H. Wu, C. V. Rao, and B. Rambabu, Mater. Chem. Phys., 116, 532-535 (2009). https://doi.org/10.1016/j.matchemphys.2009.04.028
  11. A. Nyten, A. Abouimrane, M. Armand, T. Gustafsson, and J. O. Thomas, Electrochem. Commun., 7, 156-160 (2005). https://doi.org/10.1016/j.elecom.2004.11.008
  12. R. Dominko, M. Bele, M. Gaberseek, A. Meden, M. Remskar, and J. Jamnik, Electrochem. Commun., 8, 217- 222 (2006). https://doi.org/10.1016/j.elecom.2005.11.010
  13. A. Kokalj, R. Dominko, G. Mali, A. Meden, M. Gaberscek, and J. Jamnik, Chem. Mater., 19, 3633-3640 (2007). https://doi.org/10.1021/cm063011l
  14. R. Dominko, J. Power Sources., 184, 462-468 (2008). https://doi.org/10.1016/j.jpowsour.2008.02.089
  15. W. Liu, Y. Xu, and R. Yang, J. Alloys Comp, 480, L1-L4 (2009). https://doi.org/10.1016/j.jallcom.2009.01.110
  16. K. Karthikeyan, V. Aravindan, S. B. Lee, I. C. Jang, H. H. Lim, G. J. Park, M. Yoshio, and Y. S. Lee, J. Power Sources, 195, 3761-3764 (2010). https://doi.org/10.1016/j.jpowsour.2009.11.138
  17. K. Karthikeyan, V. Aravindan, S. B. Lee, I. C. Jang, H. H. Lim, G. J. Park, M. Yoshio, and Y. S. Lee, J. Alloys Comp, 504, 224-227 (2009).
  18. L. X. Yang, Y. J. Zhu, H. Tong, and W. W. Wang, Ultrason. Sonochem., 14, 259-265 (2007). https://doi.org/10.1016/j.ultsonch.2006.05.006
  19. X. H. Hu, X. P. Ai, H. X. Yang, and S. X. Li, J. Power Sources., 74, 240-243 (1998). https://doi.org/10.1016/S0378-7753(98)00049-4
  20. R. Dominko, I. Arcon, A. Kodre, D. Hanzel, and M. Gaberscek, J. Power Sources., 189, 51-58 (2009). https://doi.org/10.1016/j.jpowsour.2008.11.077
  21. M. E. A. Dompablo, R. Dominko, J. M. G. Amores, L. Dupont, G. Mali, H. Ehrenberg, J. Jamnik, and E. Moran, Chem. Mater., 20, 5574-5584 (2008). https://doi.org/10.1021/cm801036k
  22. M. Park, X. Zhang, M. Chung, G. B. Less, A. M. Sastry, J. Power Sources (DOI: 10.1016/j.jpowsour.2010.06.060).
  23. H. H. Lim, I. C. Jang, S. B. Lee, K. Karthikeyan, V. Aravindan, and Y. S. Lee, J. Alloys Compds, 495, 181-184 (2010). https://doi.org/10.1016/j.jallcom.2010.01.115
  24. S. B. Lee, I. C. Jang, H. H. Lim, V. Aravindan, H. S. Kim, and Y. S. Lee, J. Alloys Compds, 491, 668-671 (2010). https://doi.org/10.1016/j.jallcom.2009.11.037
  25. Q. Wang, Z. Wen, and J. Li, Adv. Func. Mater., 16, 2141-2146 (2006). https://doi.org/10.1002/adfm.200500937
  26. G. G. Amatucci, F. Badway, A. D. Pasquier, and T. Zheng, J. Electrochem. Soc., 148, A930-A939 (2001). https://doi.org/10.1149/1.1383553
  27. J. H. Park and O. O. Park, J. Power Sources., 111, 185-190 (2002). https://doi.org/10.1016/S0378-7753(02)00304-X
  28. V. Khomenko, E. R. Pinero, and F. Beguin, J. Power Sources., 153, 183-190 (2006). https://doi.org/10.1016/j.jpowsour.2005.03.210
  29. K. Zaghib, J. B. Goodenough, A. Mauger, and C. Julien, J. Power Sources., 194, 1021-1023 (2009). https://doi.org/10.1016/j.jpowsour.2009.05.043
  30. W. Xing, S. Z. Qiao, R. G. Ding, F. Li, G. Q. Lu, Z. F. Yan, and H.M. Cheng, Carbon, 44, 216-224 (2006). https://doi.org/10.1016/j.carbon.2005.07.029

피인용 문헌

  1. High-energy X-ray powder diffraction and atomic-pair distribution-function studies of charged/discharged structures in carbon-hybridized Li2MnSiO4 nanoparticles as a cathode material for lithium-ion batteries vol.263, 2014, https://doi.org/10.1016/j.jpowsour.2014.03.065