한국전산유체공학회지 (Journal of computational fluids engineering)

한국전산유체공학회 (Korean Society of Computational Fluids Engineering)
권호 표지
DOI QR코드

DOI QR Code

에어컨 실내기의 공력소음 예측을 위한 RANS 난류모델의 성능 평가

PERFORMANCE ASSESSMENT OF THE RANS TURBULENCE MODELS IN PREDICTION OF AERODYNAMIC NOISE FOR AIR-CONDITIONER INDOOR UNIT

  • Min, Y.H. (Dept. of Mechanical Engineering, Sogang Univ.) ;
  • Kang, S. (Dept. of Mechanical Engineering, Sogang Univ.) ;
  • Hur, N. (Dept. of Mechanical Engineering, Sogang Univ.) ;
  • Lee, C. (Dept. of Mechanical Engineering, Yonsei Univ.) ;
  • Park, J. (CTO Division, HAE laboratory, LG electronics)
  • 투고 : 2012.10.23
  • 심사 : 2012.11.27
  • 발행 : 2012.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The objective of the present study is to investigate the effects of various turbulence models on the aerodynamic noise of an air-conditioner (AC) indoor unit. The results from URANS (unsteady Reynolds-averaged Navier-Stokes) simulations with the standard k-$\varepsilon$, k-$\omega$ shear stress transport (SST) and Spalart-Allmaras (S-A) turbulence models were analyzed and compared with the noise data from the experiments. The frequency spectra of the far-field acoustic pressure were computed using the Farrasat equation derived from the Ffowcs Williams-Hawkings (FW-H) equation based on the acoustic analogy model. Two fixed fan casings and the rotating cross-flow fan were used as the source surfaces of the dipole noise in the Farrasat equation. The result with the standard k-$\epsilon$ model showed a much better agreement with the experimental data compared to the k-w SST and S-A models. The differences in the pressure spectra from the different turbulence models were discussed based on the instantaneous vorticity fields. It was found that the over-estimated power spectra with the k-w SST and S-A models are related to the emphasized small-scale vortices produced with these models.

키워드

참고문헌

  1. 1996, Hiromu, M., Hirofumi, S., Youshinobu, T., Yoshiki, Y. and Koichi, K., "Study of Cross-Flow-Fan Internal Flow by FLow Visualization," The Japan Society of Mechanical Engineers Series B, Vol.39, No.3, pp.540-545.
  2. 2004, Andrea, T., Andrea, L. and Antonio, D. M., "An experimental investigation of the flow field pattern within the impeller of a cross-flow fan," Experimental Thermal and Fluid Science, Vol.29, pp.53-64. https://doi.org/10.1016/j.expthermflusci.2004.02.007
  3. 2003, Martin, G., Simon, D. and Toni, K., "Flow Field and Performance of Cross Flow Fan - Experimental and Theoretical Investigations," Journal of Thermal Science, Vol.12, No.3, pp.234-238. https://doi.org/10.1007/s11630-003-0074-0
  4. 2001, Lazzarotto, L., Lazzaretto. A., Martegani, A.D. and Macor, A., "On Cross-Flow Fan Similarity: Effect of Casing Shape," Journal of Fluids Engineering, Vol.123, pp.523-531. https://doi.org/10.1115/1.1379033
  5. 2000, Koo, H. M., "Discrete Frequency Noise Reduction of the Cross-Flow Fan of the Split Type Room Air- Conditioners Using the Skewed Stabilizers," The Japan Society of Mechanical Engineers Series C, Vol.43, No.1, pp.104-109.
  6. 2006, Tsai, G.L., Tu, T.H., Li, T.C. and Wang, K.H., "Flow Style Investigation and Noise Reduction of a Cross-Flow Fan with Varied Rotor-Skew-Angle Rotor," The Japan Society of Mechanical Engineers Series B, Vol.49, No.3, pp.695-704.
  7. 2008, Jiaye, G., Fei, L., Min, L. and Keqi, Wu., "The Unsteady Fluctuating Pressure and Velocity in a Cross Flow Fan," Journal of Thermal Science, Vol.17, No.4, pp.349-355. https://doi.org/10.1007/s11630-008-0349-6
  8. 2003, Moon, Y.J., Cho, Y. and Nam, H.S., "Computation of unsteady viscous flow and aeroacoustic noise of cross flow fans," Computers & Fluids, Vol.23, pp.995-1015.
  9. 2010, You, L., Hua, O., Jie, T., Zhaohui, D. and Zhiming, Zheng., "Experimental and numerical studies on the discrete noise about the cross-flow fan with block-shifted impellers," Applied Acoustics, Vol.71, pp.1142-1155. https://doi.org/10.1016/j.apacoust.2010.07.002
  10. 2005, Govardhan, M. and Lakshmana, S.D., "Computational Studies of Flow through Cross Flow Fans - Effect of Blade Geometry," Journal of Thermal Science, Vol.14, No.3, pp.220-229. https://doi.org/10.1007/s11630-005-0005-3