Journal of the Korean Institute of Illuminating and Electrical Installation Engineers (조명전기설비학회논문지)

The Korean Institute of IIIuminating and Electrical Installation Engineers (한국조명전기설비학회)
권호 표지
DOI QR코드

DOI QR Code

Simulation Study of Characteristics for Device of the High Voltage Pulse Generator

고전압 펄스 발생 장치의 특성에 관한 시뮬레이션 연구

  • 김영주 (홍익대 과학기술대 전자전기공학과) ;
  • 신주희 (홍익대 전자전산과 대학원)
  • Received : 2012.11.01
  • Accepted : 2012.11.14
  • Published : 2012.12.30
Download PDF
⟨ Previous Next ⟩

Abstract

The high-voltage pulse generator is consist of transformers of fundamental wave and harmonic waves, and shunt capacitances. The pulse has the fundamental wave and the harmonic waves that have been increased as a series circuit by the transformers to make high voltage pulse. This paper shows the high-voltage pulse generator simulation using a circuit program with experiment data. In the equivalent circuit, magnetized inductances and loss resistances which affect output voltage, have been obtained. The output capacitor circuits have characteristics of band pass. The output voltages of the pulse width 50% and 25%(PWM) were obtained. The output of the high-voltage pulse generator is 2.5kHz, 1.8kV.

Keywords

References

  1. A. Mizuno. et al, "Indoor Air Cleaning using a Pulsed Discharge Plasma," IEEE trans. Industry application, Vol.35, No.6, pp.1284-1287, Nov. 1999. https://doi.org/10.1109/28.806040
  2. Fei Wang et al, "Transient plasma Ignition of Qniescent and Flowing Air/Fuel Mixtures," IEEE Trans. Plasma Sci., Vol.33, No.2, pp.844-849, Aprl. 2005. https://doi.org/10.1109/TPS.2005.845251
  3. Jose' O. Rossi et al, "A 4-kV/2-A/5-kHz Compact Modulation for Nitrogen Plasma Ion Implantation," IEEE Trans. Plasma Sci., Vol.34, No.5, pp.1757-1765, Oct. 2006. https://doi.org/10.1109/TPS.2006.883338
  4. K.H. Schoenbach et al, "Bio electrics-New applications for pulsed power technology," IEEE Trans. Plasma Sci.. Vol.30, No.1, pp.293-300, Feb. 2002. https://doi.org/10.1109/TPS.2002.1003873
  5. S.B. Dev. et al, "Medical applications of electroporation," IEEE Trans. Plasma Sci., Vol.28, No.1, pp.206-223, Feb. 2000. https://doi.org/10.1109/27.842905
  6. K. Yukimura et al, "Two switch high voltage modulator for plasma based ion implantation," Surf. coat. Technol, Vol.156, No.1-3, pp-66-70, Jul. 2002.
  7. L.M Redondo et al, "A new method to build a high-voltage pulse using only semiconductor Switches for plasma-immersion ion implatation," Surf. Coat. Technol., Vol.136, No.1-3, pp.51-54, Feb. 2001. https://doi.org/10.1016/S0257-8972(00)01010-0
  8. X. Tian et al, "Special modulator for high frequency, low-voltage plasma immersion implantation," Rev. Sci. Instrans., Vol.70, No.3, pp.1824-1827, Mar. 1999. https://doi.org/10.1063/1.1149675
  9. Y. Kim, "Study for the Design and Measurement of the High Voltage Pulse Generator Using Transformers," The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers, 26(1), pp. 82 - 86, 2012. https://doi.org/10.5207/JIEIE.2012.26.1.082
  10. IEEE, Transformer Equivalent Circuit, ANSI/IEEE Std 390TM - 1987(R2007).