DOI QR코드

DOI QR Code

Physical and Mechanical Properties of Blast Furnace Cement Concrete with Polypropylene Fiber

폴리프로필렌 섬유를 보강한 고로시멘트 콘크리트의 물리·역학적 특성

  • Received : 2012.10.05
  • Accepted : 2012.11.19
  • Published : 2012.11.30

Abstract

This study will not only prove experimental dynamic properties which are classified to slump, compressed strength, bending strength and toughness index blast-furnace cement concrete with polypropylene (PP) fiber that refer properties and volume of it, but also establish a basic data in order to use PP fiber reinforced blast-furnace cement concrete. The slump didn't changed by PP fiber volume $5kgf/m^3$ because of flexibility of fiber in despite of loose mixing. The reason why the slump decreased steadily by PP fiber volume $3kgf/m^3$ was rising contact surface of water. The compressed strength indicated a range of 19.49~26.32 MPa. The tensile strength indicated a range of 2.10~2.44 MPa. The bending strength was stronger about 3~16 % in case of mixing with PP fiber volume than normal concrete. The flexure strength indicated a range of 4.30~4.83 MPa. The toughness indicated a range of $0{\sim}19.88N{\cdot}mm$ and was stronger about 6.7 times in case of PP fiber volume $9kg/m^3$ than PP fiber volume $1kg/m^3$. The pavement with PP fiber volume over such a fixed quantity in the roads of a respectable amount load can have a effect to prevent not only resistance against clack but also rip off failures.

Keywords

References

  1. ACI Committee 544. 1988. Measurement of Properties of Fiber Reinforced Concrete, American Concrete Institute, Detroit, Michigan: 111.
  2. ASTM C 1018 (1977), "Standard test method for flexural toughness and first-crack strength of fiber-reinforced concrete (using beam with third-point loading).
  3. Beaudoin, J. J., 1990. Handbook of Fiber Reinforced Concrete: Principles, Properties, Developments and Applications, Noyes Publications.
  4. Bernhard R. Maidl (1995), "Steel fibre reinforced concrete", Ernst & Sohn.
  5. Cheong. Y. G., C. K. Yi., and J. Y. Lee, 2008, Bond Behavior of GFRP Rebars Embedded in Concrete Under Cyclic Loading, Architectural Institute of Korea 24(8): 93-101 (in Korean).
  6. Gopalaratnam, V. S., and S. P. Shah. 1987. Tensile failure of steel fiber reinforced concrete subjected to impact loading. Journal of the ACI 83(1): 117-126.
  7. Ha. T. W, 2002, Development of Polypropylene fiber for shotcrete. Chonnam National Univercity Graduate School, Master a thesis (in Korean).
  8. H, S. Armelin and N. Banthia, 1997, Predicting the Flexural Postcracking Performance of Steel Fiber Reinforced Concrete from the Pullout of Single Fibers, ACI Materials Journal 94(1): 18-31.
  9. J, C. Chern and C, H. Young, 1990, Factors Influencing the Drying Shrinkage of Steel Fiber Reinforced Concrete, ACI Materials Journal 87(2): 123-139 (in Korean).
  10. J, E. McDonald. 2000, Evaluation of Materials for Repair of Erosion Damage in Hydraulic Structures, ACI special publication, SP 192-54, 192: 887-898.
  11. J, Mirza. 1991. Durability Properties of Overlays for Erosion-Damaged Concrete, ACI special publication, SP 126-15, 126: 279-294.
  12. Jun, H. Y, 2012, Properties of Fiber Reinforced Granite Soil Concrete for Environment Friendly Pavement Material. Sangmyung Univercity Graduate School, A Doctoral thesis (in Korean).
  13. Kim, Y. T., and W. J. Han, 2008. Comparison of Mechanical Characteristics of Fiber-Reinforced Lightweight Soils. The Journal of Korean Society of ocean Engineers 22(4): 51-58 (in Korean).
  14. Korean standards association. 2007. KS F 2402, Method of test for slump of concrete: 1-5 (in Korean).
  15. Korean standards association. 2010. KS F 2405, Standard test method for compressive strength of concrete: 1-16 (in Korean).
  16. Korean standards association. 2010. KS F 2408, Standard test method for flexural strength of concrete: 1-9 (in Korean).
  17. Korean standards association. 2011. KS F 2423, Standard test method for splitting tensile strength of concrete: 1-12 (in Korean).
  18. Lawer, J. S., Zampini D., and Shah S. P, 2000. Permeability of cracked hybrid fiber-reinforcedunder load, ACI Materials Journal 99(4): 379-385.
  19. Lee, H. K., and S. Y. Song. 2006. Effect of Volume Fraction of Fibers on Mechanical Properties of a Lightweight Aggregate Concrete Reinforced with Polypropylene Fibers, Journal of The Korea Concrete Institute 18(6): 743-748 (in Korean). https://doi.org/10.4334/JKCI.2006.18.6.743
  20. Lee. S. Y., Y. J. Park, S. M. Kim, K. H. You, S. I. Jang., and Y. H. Suh, 2010. A Study on the Performance Evaluation of Polypropylene Fiber Reinforced Concrete, Journal of Korean Society for Rock Mechanics 20(5): 378-389 (in Korean).
  21. Li, V. C., 2002, High-Performance Applications of Fibers in Civil Engineering, Jounal of Applied Polymer Science 83: 660-686 https://doi.org/10.1002/app.2263
  22. Mindness, S. 1987. Properties of concrete reinforcement with fibrillated polypropylene fiber under impact loading. Cement and Concrete Research (18): 100-114.
  23. Mobasher, B., H. Stsng, and S. P. Shah. 1990. Microcrack in fiber reinforced concrete. Cement and Concrete Research (20): 665-676. https://doi.org/10.1016/0008-8846(90)90001-E
  24. Oh, B. H., M. G. Lee, S. W. Yoo, and S. H. Baik, 1996. A Study on the Strength and Drying Shrinkage Crack Control Characteristics of Polypropylene Fiber Reinforced Concrete, Journal of The Korea Concrete Institute 8(6): 151-161 (in Korean).
  25. R, Heere., D, R. Morgan., N, Banthia, and Y. Yogendran, 1996. Evaluation of Shotcrete Repaired Condrete Dams in British Columbia, ACI Concrete International 18(3): 1996: 24-33.
  26. Song, C. S., and S. Y. Lim, 2002. Mechanical Characteristics of Reinforced Soil. Journal of Env. Res. & Reveg. Tech 5(6): 37-42 (in Korean).
  27. Sung, C. Y and K. H. Noh, 2004, Flow Properties of Polypropylene Fiber Reinforced High Flow Concrete,, Journal of the Korean Society of Agricultural Engineers 46(4): 57-63 (in Korean). https://doi.org/10.5389/KSAE.2004.46.4.057
  28. Won. J. P., C. G. Park, I. S. Jeong,, and W. J. Jeon. 2002, Effect of Polypropylene Fiber on Reduction of Shrinkage Crack and Improvement of Durability of Rural Road Concrete Pavement, Journal of The Korean Society Agricultural Engineers 44(1): 134-141 (in Korean).
  29. Won, J. P, and C. G, Park. 2006. Performance and Application of Hybrid Fiber Reinforced Concrete, Journal of the Korean Society of Civil Engineering 18(1): 22- 27 (in Korean).
  30. Yang. K. H and S. J. O, 2008. Effect of Volume Fraction and Length of Fiber on the Mechanical Properties of Fiber Reinforced Concrete, Journal of The Korea Institute of Building Construction 8(1): 43-48 (in Korean). https://doi.org/10.5345/JKIC.2008.8.1.043