참고문헌
- Boinghoff, O., "Untersuchen zum Reibungsverhalten der Gleitschuhe in Schragscheiben‐Axialkolbenmascinen", VDI‐Forschungsheft, VDIVerlag, Dusseldorf, vol. 584, 1977
- Bergada, J.M., Watton, J. & Haynes, J.M., "The hydrostatic/hydrodynamic behavior of an axial piston pump slipper with multiple lands", Meccanica, 2010, vol. 45, pp585-602 https://doi.org/10.1007/s11012-009-9277-0
- Kobayashi S., Hirose M., Hatsue J. & Ikeya M., "Friction characteristics of a ball joint in the swash plate type axial piston motor", Proc. 8th international symposium on fluid power, 1987, pp 565-592
- Manring, N.D., Wray, C.L. & Dong, Z., "Experimental Studies on the Performance of Slipper Bearings Within Axial‐Piston Pumps", J. of Tribology, 2004, vol. 126, pp511-518 https://doi.org/10.1115/1.1698936
- Johnson, R.E. & Manring, N.D., "Translating circular trust bearings", J. Fluid Mech., 2005, vol.530, pp197-212 https://doi.org/10.1017/S0022112005003782
- Koc, E & Hooke, C.J., "Investigation into the effects of orifice size, offset and overclamp ratio on the lubrication of slipper bearings", Tribology International, 1996, vol. 29, No. 4, pp299-305 https://doi.org/10.1016/0301-679X(95)00044-5
- Hooke, C.J &, Kakoullis, Y.P., " The lubrication of slippers on axial piston pumps", 5th international fluid power symposium, Sept.1978, pp 13-26
- Hooke, C.J. & Kakoullis, Y.P., " The effects of centrifugal load and ball friction on the lubrication of slippers in axial piston pumps", 6th international fluid power symposium, April 1981, pp 179-191
- Hong, Y.S. & Lee, S.Y., "A comparative study of Cr‐X‐N(X=Zr, Si) coatings for the improvement of the low‐speed torque efficiency of a hydraulic piston pump", Metals & Materials International, 2008, vol. 14, No. 1, pp33-40 https://doi.org/10.3365/met.mat.2008.02.033