DOI QR코드

DOI QR Code

유도결합 플라즈마를 이용한 마그네트론 스퍼터링으로 증착된 나노결정질 CrN 코팅막의 성장

Growth Behavior of Nanocrystalline CrN Coatings by Inductively Coupled Plasma (ICP) Assisted Magnetron Sputtering

  • 서대한 (목포대학교 신소재공학과) ;
  • 전성용 (목포대학교 신소재공학과)
  • Seo, Dae-Han (Department of Advanced Materials Science and Engineering, Mokpo National University) ;
  • Chun, Sung-Yong (Department of Advanced Materials Science and Engineering, Mokpo National University)
  • 투고 : 2012.05.08
  • 심사 : 2012.08.23
  • 발행 : 2012.11.30

초록

Nanocrystalline CrN coatings were deposited by DC and ICP-assisted magnetron sputtering on Si (100) substrates. The influences of the ICP power on the microstructural and crystallographic properties of the coatings were investigated. For the generation of the ICP, radio frequency was applied using a dielectric-encapsulated coil antenna installed inside the deposition chamber. As the ICP power increased from 0 to 500W, the crystalline grain size decreased. It is believed that the decrease in the crystal grain size at higher ICP powers is due to resputtering of the coatings as a result of ion bombardment as well as film densification. The preferential orientation of CrN coatings changed from (111) to (200) with an increase in the ICP power. The ICP magnetron sputtering CrN coatings showed excellent surface roughness compared to the DC magnetron sputtering coatings.

키워드

참고문헌

  1. M. Kang, S. Je, K. Kim, B. Shin, D. Kwon, and J. Kim, "Cutting Performance of CrN-based Coatings Tool Deposited by Hybrid Coating Method for Micro Drilling Applications," Surf. Coat. Tech., 202 [22-23] 5629-32 (2008). https://doi.org/10.1016/j.surfcoat.2008.06.130
  2. S. Shin, M. Kim, M. Kang, K. Kim, D. Kwon, and J. Kim, "Cutting Performance of CrN and Cr-Si-N Coated End-mill Deposited by Hybrid Coating System for Ultra-High Speed Micro Machining," Surf. Coat. Tech., 202 [22-23] 5613-16 (2008). https://doi.org/10.1016/j.surfcoat.2008.06.128
  3. K. Weng, T. Lin, and D. Wang, "Tribological Property Enhancement of CrN Films by Metal Vapor Vacuum Arc Implantation of Vanadium and Carbon Ions," Thin Solid Films, 516 [6] 1012-19 (2008). https://doi.org/10.1016/j.tsf.2007.06.162
  4. F. Zhou, K. Chen, M. Wang, X. Xu, H. Meng, M. Yu, and Z. Dai, "Friction and Wear Properties of CrN Coatings Sliding Against $Si_3N_4$ Balls in Water and Air," Wear, 265 [7-8] 1029-37 (2008). https://doi.org/10.1016/j.wear.2008.02.010
  5. Q. Sun and Z. Fu, "An Anode Material of CrN for LithiumIon Batteries," Electrochemical. Solid State Lett., 10 [8] A189-93 (2007). https://doi.org/10.1149/1.2745087
  6. S. W. Lee, J.-S. Ha, H.-J. Lee, H.-J. Lee, H. Goto, T. Hanada, T. Goto, K. Fujii, M. W. Cho, and T. Yao, "Lattice Strain in Bulk GaN Epilayers Grown on CrN/Sapphire Template," Appl. Phys. Lett., 94 [8] 082105-082107 (2009). https://doi.org/10.1063/1.3086890
  7. S. Tan, X. Zhang, X. Wu, F. Feng, and J. Jiang, "Comparison of Chromium Nitride Coating Deposited by DC and RF Magnetron Sputtering," Thin Solid Films, 519 [7] 2116-20 (2011). https://doi.org/10.1016/j.tsf.2010.10.067
  8. S. J. Jung, K. H. Lee, J. J. Lee, and J. H. Joo, "Study of Chromium and Chromium Nitride Coating Deposited by Inductively Coupled Plasma-Assisted Evaporation," Surf. Coat. Tech., 169-170 [6] 363-66 (2003). https://doi.org/10.1016/S0257-8972(03)00035-5
  9. B. D. Cullity, and S. R. Stock, "Element of X-ray Diffraction," 3rd. ed., pp. 167-171, Addison-wesley Publishing Conpany Inc, United States of America, 2001.
  10. I. Petrov, P. B. Barna, L. Hultman, and J. E. Greene, "Microstructural Evolution During Film Growth" J. Vac. Sci. Tech., A 21 [5] S117-128 (2003). https://doi.org/10.1116/1.1601610
  11. S. Y. Chun, "Microstructure and Mechanical Properties of Nanocrystalline TiN Films Through Increasing Substrate Bias," J. Kor. Ceram. Soc., 47 [6] 479-84 (2010). https://doi.org/10.4191/KCERS.2010.47.6.479
  12. N. Maazi and N. Rouag, "Consideration of Zener Drag Effect by Introducing a Limiting Radius for Neighbourhood in Grain Growth Simulation," J. Cryst. Growth, 243 [2] 361-69 (2002). https://doi.org/10.1016/S0022-0248(02)01420-3
  13. M. K. Lee, W. W. Kim, S. J. Kim. C. K. Lee, and Y. S. Kim, "A Study on the Characteristics of TiN Film Deposited Reactive Magnetron Sputter Ion Plating," J. Kor. Inst. Surf. Eng., 33 [2] 115-25 (2000).
  14. Q. Kong, L. Ji, H. Li, X. Liu, Y. Wang, J. Chen, and H. Zhou, "Influence of Substrate Bias Voltage on the Microstructure and Residual Stress of CrN Films Deposited by Medium Frequency Magnetron Sputtering," Mater. Sci. Eng. B., 176 [11] 850-54 (2011) https://doi.org/10.1016/j.mseb.2011.04.015
  15. G. R. Lee, H. Kim, H. S. Choi, and J. J. Lee, "Superhard Tantalum-Nitride Films Formed by Inductively Coupled Plasma-Assisted Sputtering," Surf. Coat. Tech., 201 [9-11] 5207-10 (2007). https://doi.org/10.1016/j.surfcoat.2006.07.207

피인용 문헌

  1. Effects of Duty Cycle and Pulse Frequency on the Microstructure and Mechanical Properties of TiAlN Coatings vol.51, pp.5, 2014, https://doi.org/10.4191/kcers.2014.51.5.447
  2. A Study of Characteristic based on Working Pressure of ITO Electrode for Display vol.20, pp.4, 2016, https://doi.org/10.7471/ikeee.2016.20.4.392
  3. 직류 및 유도결합 플라즈마 마그네트론 스퍼터링법으로 제조된 HfN 코팅막의 미세구조 및 기계적 물성연구 vol.53, pp.2, 2012, https://doi.org/10.5695/jkise.2020.53.2.67
  4. Characteristics of HfN coatings by inductively coupled plasma-assisted magnetron sputtering vol.58, pp.2, 2012, https://doi.org/10.1007/s43207-020-00084-3